How to use BS-0 semi-universal rotary and dividing head
Вставка
- Опубліковано 25 сер 2024
- BS-0 semi-universal rotary and dividing head
Manuals:
thaler.si/uplo...
thaler.si/uplo...
I honestly think, that this is simply one of the most beautiful pieces of engineering I have ever seen.
Not just that it looks great, it also allows you to do things with your drilling or milling machine, that you couldn't do before you had it.
The best offer I could find: www.alibaba.co...
Examples:
Direct indexing: 1:51
Indirect indexing (dividing a whole circle): 2:57
Indirect indexing (measuring an angle): 5:11
Music: Vincent Rubinetti, Grant's Etude
The best detailed review of this unit I've ever saw!👍👍👍👍👍👍👍
Beautiful
Thank you for this very well explained video, it makes the inderstanding much easier! 👍
Thank you so much a great video.
Has anyone else had issues with the spring clip that retains the sector arms jumping of its groove? The solution is very simple. Forget about the spring clip and fit a rubber 'O' ring in the groove where it fits. The 'O' ring I have on mine is about 3.6mm in cross section and 14mm inside diameter. This provides a good level of friction whilst still allowing the sector arms to be indexed around. A little dab of Vaseline gel may help to further fine tune the friction level.
Oh my...remember the time I was at mechanical school....this drives me crazy for a time.
Just a quick mention about this type only being semi universal. Recently Oxtools channel has put up a video about adding an electronic rotary drive to such a head as this. The addition of a stepper motor drive and rotary encoder makes fully universal/differential milling possible with this type of head. Cutting true helical gears should be straight forward with such a set up.
Link to video with electronic indexing set up: ua-cam.com/video/AVydTvwqmRs/v-deo.html
You're using the INDICES stops backwards. Choose the Thinnest side to 'work up to' and 'work from' not the wide (BRICK WALL) side.
What a great video. Thanks for putting this together
My concern is the 3jaw chuck. They are never perfect. If you put a gear blank in there and there’s 4 or 5 thou of runout, which is common in 3j chucks, you won’t come out with a gear that runs true. The only way around that is a set tru chuck or you run the same chuck on your lathe to make the arbor, but then you need a lathe with the same spindle nose.
Thank you for the great explanation....
Very informative 👍🏼
Merci
Thanks, this is very well explained
Thank you. Clear and concise. Well done.
Thanks! This makes it very simple
Great. Glad you like it.
Pretty sure I have the exact same one. I was a little bummed that my dovetail locks are steel instead of brass though. Might have to remedy that.
Thank You Sir.
i think you are using the sector arms from the wrong side ...you can do it that way but i think it is a more intuetive feel to do it the other way
I agree. You should be using them opposite of the way you are now. (Clockwise instead of counter clockwise) The flat part of the sector arm should be touching the pin, not the chamfered edge. Always count clockwise and move the sector arms the same way.
V nice
Hi, thank you so much for this video. Can I ask what the height of the head is when pointed up with the chuck mounted?
250 mm or not quite 10" This is for the BS-0 5" model.
How do you make gear 127.???
Where can I buy it please! And which brand should I choose?
I bought one of the cheaper priced heads of this size and set about doing a few mods and fine tuning. It is now an absolute joy to use. The cheaper versions often have a wormwheel gear made by the powder metal sintering process. The more expensive units have the wormwheel gear machined from a disc of bronze. The cheaper sintered powder metal gear sometimes needs a bit of getting and bedding in to get a really smooth action throughout the full 360° rotation.
you said you left a link to the cheapest one you could find. I don't see the link anywhere
Sorry about that. I just updated the description. You should have it there now.
Can I help with the craziest prices I came across which I think it’s too good to be true but the decision is yours rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F392597716832
This really looks too good to be true, but if it is, it really is a great offer.
Please tell me, is the toughness good for this head?
I don't know about toughness of the device. Sorry.
@@S7udio1381 Nevertheless thank you
I would think the original B&S manual will be far more helpful than the chenglish version booklet that comes with these units made in China.
how can we cut 77 teeth????????
That's a great question. You will need an indexing plate with 77 holes. You can have one made on a laser. Perhaps you will need to make smaller holes, to fit them all on the perimeter. That's how I would do it.
@@S7udio1381 Thanks for your reply.i thought that you have any simple idea for 77 indexing without made a indexing plate.but i had done it with compound indexing .
@@sukhman7907 I don't know how to do that. If you can show me, that would be great.
@@sukhman7907 Is the process you describe as 'compound' the method using additional external gears. That is what I know as compound dividing. The manufacturers info says this geared compound set up is only possible when you get up to the BS 2 model and above. The BS0 and BS1 are not suited to compound division.
Cut 76 teeth and count the first tooth twice😂😂
I think this is one of those ratios that would require a compound set up using extra external gearing to drive the input shaft on the head. It is not listed as possible to do that set up on the smaller BS 0 or BS 1 dividing heads. That extra versatility starts with the BS 2 model and larger.
Very well explained ... Thanks.