Làm sao biết được địa chỉ 1 số bit đặc biệt của Kuka được ạ, Ví dụ như Chế độ (Auto, EXT, T1, T2), trạng thái robot, vị trí các trục,.... Em xin cảm ơn ạ
Please make a video where show which are the variable to work with kuka (example auto_ext, driver on-off bits .... and other to make kuka on and ready to works) . Thanks a lot !
excellent video congratulations! It is true, it would be very interesting to see if you can make a video with the integration of start-stop signals and commands to the robot Regards
you must set the PROFINET device name of KUKA robots in Workvisual (default is kuka-noname) identical to the one in TIA(default is krc4), otherwise name assignment should be performed in TIA diagnostic tab.
Good morning, I have a query, I have a problem with the connection, the controller of the krc4 compact does not recognize me and I made the configuration in the portal as is and in the workvisual. Could you support me what I need to do more to verify the connection between PLC and Krc4 compact. Thank you
Thanks a lot ❤
Làm sao biết được địa chỉ 1 số bit đặc biệt của Kuka được ạ, Ví dụ như Chế độ (Auto, EXT, T1, T2), trạng thái robot, vị trí các trục,.... Em xin cảm ơn ạ
Please make a video where show which are the variable to work with kuka (example auto_ext, driver on-off bits .... and other to make kuka on and ready to works) . Thanks a lot !
I found this guys tutorial useful ua-cam.com/video/eg6vnXBNJWo/v-deo.html
excellent video
congratulations!
It is true, it would be very interesting to see if you can make a video with the integration of start-stop signals and commands to the robot
Regards
@@joseantoniomadrigalgarcia2268 we are waiting....since 1 year
Merhaba video için teşekkür ederiz kuka GSDML Dosyasını paylaşırmısınız
A ơi có thể giúp e thêm ngõ in/out của kuka . Mong đc a hướng dẫn thêm. E cảm ơn
Amazing details... I don't why I can't get kuka to assign device.. What could go wrong??
you must set the PROFINET device name of KUKA robots in Workvisual (default is kuka-noname) identical to the one in TIA(default is krc4), otherwise name assignment should be performed in TIA diagnostic tab.
Ништяк!
Спасибо, помог!
Làm sao để đc input và output của kuka trùng với ngõ input và output của plc ạ
Good morning, I have a query, I have a problem with the connection, the controller of the krc4 compact does not recognize me and I made the configuration in the portal as is and in the workvisual. Could you support me what I need to do more to verify the connection between PLC and Krc4 compact. Thank you
"krc4 compact does not recognize me" May be KRC4 do not have facial recognition.
I basically did everything like in the video . But in the minute 7.51 in the video it showed the device name , but at mine it showed nothing .
make sure you installed the required option package on KUKA side to enable the Profinet interface... It is not included in the video. Sorry