As far as the meter goes I didn’t have access to one 😢. I did meet a guy about a month ago that has one. Was gonna let them break in and ask him how much he wants to meter. I made 1/4 mile passes with the box. Plan on doing it without the box this winter. Box spec Net Vol Per Sub: 2.24 ft3 Total Net Volume: 4.48 ft3 Gross Volume: 7.85 ft3 Box Tuning: 33.10 hz Port Area: 65.00 In2 Port Volume: 1.41 ft3 Port Area Per Foot/Liter: 14.50 In2 Est Bandwidth: 24.83 hz - 66.20 hz Subsonic Filter: 24.83 hz LPF: 66.20 hz
Love those VXFs. I have two twelves like yours at 1 ohm, on a Orion HCCA splx 3000.1D, and I’ve beat those things to death for 4 years and they have never missed a beat. No idea what power im putting to them, but, they have destroyed my Carolla😂
@RCSAutoworld- What Db did the Skar VXFs do, & @ what freq.? How was it metered, like placement of the SPL meter, & what windows or doors were opened or closed? What is the Net cu. Ft., port area, & tune of that enclosure? Looks nice, you did a really good job. That amp, & both sets of subwoofer's are Beast's! What actual impedance are those D4 coils on the Skar VXF 12s? Great video. Oh, & you probably are going to drop it in another future video, but did you happen to run the 1/4 mile without the subwoofers, enclosure, & amplifier= 215 Lbs. Lighter?
Nice! I have a 95 and been looking into doing something exactly like this but don’t see that many obs backseat builds. What are your measurements for the platform?
Face the subs and the port to fire against the back wall of the cab you will get louder. Building systems for a living and I've done lots of trucks trust me just try it you'll see.
@@Issastock350 about 4500-5000 ish. I have some shifting issues that I didn’t have before my 0411 LS PCM swap or before my floor shifter swap. Sometimes the trans ignores that I put it in first gear manual and shifts from the 1-2 on its own. Which kills my times. Gonna make sure my shifter adjustment isn’t off. This is the videos of me making bone stock passes then making passes after performance mods. ua-cam.com/play/PLKt5SMYa9Fup3u657KZf4g_w8TkaaI7JV.html&si=Ds4cHWWZ8YXTTu7_
I know this has nothing to do with this video specifically but on one of your other videos where you install your electric fan I commented on what part number your lower rad hose was, any chance you got that info?
If you’re ever looking for some information on a coil to plug conversion with a marine intake or ramjet intake on these trucks, I just got one finished,
my boi gettin busy in the kitchen wit it , respect!!!!!!!!!!!!!!!!!!!!
Gettin busy in the kitchen 😂😂
As far as the meter goes I didn’t have access to one 😢. I did meet a guy about a month ago that has one. Was gonna let them break in and ask him how much he wants to meter. I made 1/4 mile passes with the box. Plan on doing it without the box this winter.
Box spec
Net Vol Per Sub:
2.24 ft3
Total Net Volume:
4.48 ft3
Gross Volume:
7.85 ft3
Box Tuning:
33.10 hz
Port Area:
65.00 In2
Port Volume:
1.41 ft3
Port Area Per Foot/Liter:
14.50 In2
Est Bandwidth:
24.83 hz - 66.20 hz
Subsonic Filter:
24.83 hz
LPF:
66.20 hz
Thank you for the specs. Nice setup.
Love those VXFs. I have two twelves like yours at 1 ohm, on a Orion HCCA splx 3000.1D, and I’ve beat those things to death for 4 years and they have never missed a beat. No idea what power im putting to them, but, they have destroyed my Carolla😂
Manheim pa in the house , much respect for you brother
Thank you for the positive energy man. Just trying to put my struggles, trials, and errors out there to help others.
@RCSAutoworld- What Db did the Skar VXFs do, & @ what freq.? How was it metered, like placement of the SPL meter, & what windows or doors were opened or closed? What is the Net cu. Ft., port area, & tune of that enclosure? Looks nice, you did a really good job. That amp, & both sets of subwoofer's are Beast's! What actual impedance are those D4 coils on the Skar VXF 12s? Great video. Oh, & you probably are going to drop it in another future video, but did you happen to run the 1/4 mile without the subwoofers, enclosure, & amplifier= 215 Lbs. Lighter?
I have 98 Chevy Tahoe currently working on a wipple supercharger
That’s is a big dream of mine!! I hope it all works out and you get to enjoy it. 🙏🏾
I’m gonna get a set of these you should do a video on them playing 🔥🔥
Nice! I have a 95 and been looking into doing something exactly like this but don’t see that many obs backseat builds. What are your measurements for the platform?
Face the subs and the port to fire against the back wall of the cab you will get louder. Building systems for a living and I've done lots of trucks trust me just try it you'll see.
What do you rev your truck out to when making passes?
@@Issastock350 about 4500-5000 ish. I have some shifting issues that I didn’t have before my 0411 LS PCM swap or before my floor shifter swap. Sometimes the trans ignores that I put it in first gear manual and shifts from the 1-2 on its own. Which kills my times. Gonna make sure my shifter adjustment isn’t off.
This is the videos of me making bone stock passes then making passes after performance mods.
ua-cam.com/play/PLKt5SMYa9Fup3u657KZf4g_w8TkaaI7JV.html&si=Ds4cHWWZ8YXTTu7_
I know this has nothing to do with this video specifically but on one of your other videos where you install your electric fan I commented on what part number your lower rad hose was, any chance you got that info?
My bad it took so long. I just commented on the other video the part numbers and info
Thanks a bunch
@@peterfriesen5927no problem. That’s what the channel is for.
If you’re ever looking for some information on a coil to plug conversion with a marine intake or ramjet intake on these trucks, I just got one finished,
@@peterfriesen5927 thanks man!! Definitely will. 😂