TNRC [Tool Nose Radius Compensation] | G41 G42 | CNC-Learning | Rajeev Sreedharan
Вставка
- Опубліковано 7 жов 2024
- In this video, you will learn Tool Nose Radius Compensation in turning.
The use of G41 and G42 is explained.
Welcome to CNC-Learning a channel run by Rajeev Sreedharan
This channel is for CNC learning
Please hit like the video and subscribe to this channel for more such videos.
To check your programming skill, you can use the programming test templates available on our website:-cnc-learning.com/
Free CNC Learning
Thanks rajieev sir
Very nice information
Very nice information sir
This is the best video out of all the videos i watched on TNRC
Thank you for the compliments
Thanks for sharing simple and basic but very clear approach.
This is a very good video. Please make an additional video showing the different types of radiuses and to enter them into the controller.
Thank you a lot! I get everything ! Greetings from Russia!
Informative video
Very nice video
Thank you Sigma youth Engineers
Hello, tool position number 9 is not for drills and taps?
@@newbasaraconsult Drill and tap do not need TNRC. 9 is only for round tools
Very useful technical information sir ❤️❤️❤️❤️❤️❤️❤️🙏🙏🙏🙏🙏🌺🌼🌻👍 that's good 👍🌻🌺
Really so nice and very clear to watch
Thank you for your kind compliments
Thanks sir ji very helpful me your video
Super sir... God bless you
Really awesome 👍
But the left and right concept slightly confused for ID and OD
Clear concept❤❤❤
Great video. Thank You.
Thank you sir
Great video 👌👌
Nice video sir ji
Excellent sir you can do more videos
thanks sir
Nice sir ji
Cnc programmers wanted..for abroad
Sir macro programing samjaiy lathe machine ki
Nice Ji 👍👍
GOOD SIR JI
Thank you
NYC video sir
Super 👌👌👌👌👌👌nice video 😍😍😍😍😍😍
Thank you Brother
Do more videos sir
I have a radius of 0.5 mm in my job , I am using 0.8 radius insert for rough finish and 0.4 insert for finish cut . I get error of interface G41/ G42. When I remove TNR comp G42 it works but than , lot of material is left for finish cut . Can you please advice.
For a precise reply, I need to see the program used.
Probable reason can be, insufficient positioning distance.
Or wrong insert nose radius in tool offset.
Else wrong tool type
Plz make a video
For selection of TOOL STYLE for sliding head machines citizen ,Tsugami ,hanwa
Big confusion on this which value have to give in
R VALUE in offset .....
Connect with me on my WhatsApp 9881052446
Hi sir, may I know the position of the tool turret in your graphics? is this Rear mounted tool turret?
Yes. Rear mounted turret
tool type number used for outer and inner grooving tools???
It depends upon how you make the program. If you are using a flat grooving tool, it will have two corners. You need to consider every corner as a seperate tool.
For example, OD grooving tool, the corner which is closer to the Chuck will be considered as an OD forward turning tool. So type 3. Other corner will act like a reverse turning tool. So tool type 4.
Tool width compensation you need to consider in the program.
For round insert grooving, it will be tool type 8 for OD
👍and subscribed.
How would you use comp on a profile that requires the tip direction to change? Such as a type 2 profile on a Haas lathe. Program as a tip 9 with no comp?
If it is a round tool with cutting on all sides, then type 9. You can use compensation.
@@CNCLearning Thank you for the reply my friend!
I would be using a V type profile insert. I could set the tool offset to the center of the TNR and comp with tip 9. This sound correct? Thank you again.
@@James-fs4rn for OD, tool type 8, offset set to tip in X direction and center in Z direction
@@James-fs4rn watch 8:21
G42 zvalue position Z0.0
change Z-.234 value
-Z value will make the tool dig into the part
Sir what is the 6th neutral tool called as can you please share the spelling I couldn't get it from net
images.app.goo.gl/KJKmQY7cqPsPrXWU9
I learn cnc programme. How to meet
Now only videos. No classes. You can watch the videos and ask if you have any doubt
Without g42 and g41 radius and angle calculation sollu g sir
I will try to do
@@CNCLearning pls try
So is a cutoff tool a number 9?
Type 9 is used when you are using a button tool (round insert). Type 9 is rarely used in daily life. In that case the offset need to be set to center of round.
How to calculate Taper thread angle R value in program .....
Connect with me on my WhatsApp 9881052446
How to compensate round insert like RNMG
7:15 tool types 5,6,7,8&9 depending on application
Type 9 for any (tool offset in center of insert)
Type 8 for OD (offset in tip)
Type 6 for ID (offset on tip)
Tool nose radius R?
@@jenifersingh.r9647 yes. Actual radius of the insert (=diameter/2)
Face turning g41org42
Face turning bigger dia to smaller dia is G41 and opposite G42
@@CNCLearning thank you sir
Sir hindi ma kab ayagi
Jaspalji....Hindi mein jaroor banaoonga
Avoid the text on the display
I think you are talking about captions. That is auto captions. You can turn it off by long pressing the video and going to settings (vertical triple dot ...)
G42 and G41 kabhi kabhi problem deta hai
Z- jata hai paisa kiv hota hai
With. G41/G42, there should be enough movement in air for activating
Thank you sir
Thank you Sir.
You are most welcome
Thanks sir
Welcome