Díky za inspiraci, právě se chystám něco podobného vyrobit a toto video mi hodně pomohlo protože jsem to měl vymyšlené zbytečně složitě. Přeji hodně dalších úspěchů nejen v dílně !💯💯💯
Interesting build nicely executed as usual. It's worth noting that the reason you wash oil containers before cutting and welding is to eliminate any flammable liquids and (more importantly) vapours (as the latter can form an explosive mixture.) Also, cement needs to react with carbon dioxide in the air to harden fully so I wonder what condition you would find it in if you cut into one of those barrels after 3 weeks.
If you leave the barrels empty but sealed you can fill them with water each time they are used for the weight and also have something lighter to work with when building, maintaining or storing. Also make a flat shelf on top if you sometimes need to add extra weight.
I was thinking the same thing, water is a lot easier to work with, you can adjust the ballast within the roller, or like you said put a weight frame on for extra ballast
Water is not easier to work with. You have to have a pump to fill or hose, and can't leave it that way in the winter. It rusts the barrels. It weighs 1/3 that of concrete. It needs to be sealed. You can use antifreeze, but it can't leak. Once filled with concrete, it is done. Just hook up and roll.
I had that idea already but I don't have a barrel. I like the way you did it but is a bit to wide and it can become difficult to negotiate around tight bends. If I would make it with two barrels I would make one barrel behind the other or with only one barrel and add extra wait on top. But never the less well done. Kind regards from London UK.
как написано в комментариях водой заполнять можно вес регулировать. от себя с водой проще слил налил перевози проще дешевле на данный каток по мотор вибратору по бокам воткнуть и генератор преспособить можно на трактор эффекта будет больше а так молодец автор за идею.
Я как то об этом не подумал, при этом в воду можно добавить к примеру удобрения но для этого надо иметь достаточное количества отверстий и конструкция должна быть усилена. Впрочем этот приём годен только на газонах и местах выпаса скота.
11:11 Stacks of bricks back there? New buildings in the works? Be sure to document that, just like you already did the roller. I like watching buildings being built just as much as the stuff you already do.
I ja sam napravio sličan, prvo sam mislio da će biti burad, ali nisam mogao da nađem bez ivica, pa sam napravio jedan od kanalizacionog šahta napunjenog betonom, a površina je glatka i ne ostavlja tragove kao kod rebrasta burad
My question in turn is, what do you know about cement? The number 1 rule to concrete is you need a form to shape it the way you want it. Whether it's steps, sidewalk, driveway. And you always want to have said form prepared before you mix your concrete, otherwise you will be disappointed.
Molim te ako češ ikad praviti korpu za travu na ovoj kosačici snimi kako češ raditi jer problem je kad kosiš mokru travo onda se ljepi na cijev za izbacivanje i sve se zatrpa a za suho nije problem.
A solid, unbroken cubic yard of concrete weighs about 4,050 pounds, A yard of water weighs approximately 1,700 pounds. THAT's why. In cold climate, a barrel full of water will freeze, expand and deform the barrel. " You could also have used Styrofoam" , but like water, it's too light.
KAO I UVIJEK ODLIČAN POSAO ,ALI ZAR NISI TREBAO UZETI RAVNE BAČVE BEZ REBARA JER TA REBRA NA BAČVAMA NAJAČE GAZE IZMEĐU NJIH JE PRITISAK NA PODLOGU MANJI ,TO MOŽEŠ UPOTRIJEBIT SAMO ZA GAZIT TRAVU I NIŠTA VIŠE ...
@@fabioantonioli6300 1) it must be sealed for water leakage, 2) the barrel is too weak, it might get crushed, 3) concrete is heavier than water, it has a higher effect
Volin ti videe, svaka čast ❤️❤️🔥🔥👍👍💪💪
Ja prvi OBOŽAVAM TE I PODRŽAVAM TE HRPU TOGA SAM NAUČIO OD TEBE !! HVALA
Díky za inspiraci, právě se chystám něco podobného vyrobit a toto video mi hodně pomohlo protože jsem to měl vymyšlené zbytečně složitě. Přeji hodně dalších úspěchů nejen v dílně !💯💯💯
Interesting build nicely executed as usual. It's worth noting that the reason you wash oil containers before cutting and welding is to eliminate any flammable liquids and (more importantly) vapours (as the latter can form an explosive mixture.)
Also, cement needs to react with carbon dioxide in the air to harden fully so I wonder what condition you would find it in if you cut into one of those barrels after 3 weeks.
👍🙏🇮🇹
That is a great thing to have to flatten the new grass sod on the new lawn 👍😎
Turned out real nice. Good Job !!! 👍
Sve pohvale🏅👍👍👍
Imaš odlične ideje svaka čast!
Doktore obožavam te gledati svakim videom me sve više iznenađuješ
Great Job on the Roller Barrels Build. looks great..
Bad ass man. Well put together.
Love all the work involved. Great Job
Super projekat svaka čast majstore
If you leave the barrels empty but sealed you can fill them with water each time they are used for the weight and also have something lighter to work with when building, maintaining or storing. Also make a flat shelf on top if you sometimes need to add extra weight.
I was thinking the same thing, water is a lot easier to work with, you can adjust the ballast within the roller, or like you said put a weight frame on for extra ballast
Water is not easier to work with. You have to have a pump to fill or hose, and can't leave it that way in the winter. It rusts the barrels. It weighs 1/3 that of concrete. It needs to be sealed. You can use antifreeze, but it can't leak. Once filled with concrete, it is done. Just hook up and roll.
Great job today hole made roller good job today 😁👍💯💯
Nicely done ! 👍
9:57
Great shot!
❤
K@@DShomemade
Step 1. Dump oil on the ground.Step 2. Wreck garage floor.
Who does that???
Just a question what do people use yard rollers for hat do they benefit?
i love ur videos i wachted all of em fantastic job keep up with the hard work
I built nearly the exact same thing but used a 100lb propane cylinder, filled it with sand, works great. Nice job on yours.
Brilliant!
Great idea... Creative... 👍
Hope the transaxle will hold up. That is a lot of weight to pull.
I like your ideas, that is very wonderful
👏👏👏
Excellent build.
I had that idea already but I don't have a barrel.
I like the way you did it but is a bit to wide and it can become difficult to negotiate around tight bends.
If I would make it with two barrels I would make one barrel behind the other or with only one barrel and add extra wait on top.
But never the less well done.
Kind regards from London UK.
You are laying down some nice looking welds bro!
why not sand instead of concrete?
it would be easier
to recycle or change
and would be cheaper
Leuk gemaakte 😊
как написано в комментариях водой заполнять можно вес регулировать. от себя с водой проще слил налил перевози проще дешевле на данный каток по мотор вибратору по бокам воткнуть и генератор преспособить можно на трактор эффекта будет больше а так молодец автор за идею.
Id use sand,
Mogao si samo nasipati rijecni pjesak BRAVO
See on
😊😊😊😊😊gtt😊
Now you can do one with holes in it to spread menuar or compost. Or peat moss.
odlican posao lave zivio
Ovdje voda ide i bolji je ucinak i vladanje poslije upotrebe praznim valjkom!
Wow 😲 nice 👍
Super 👍
Great job !
Good ii boss 💪💪👍👍
Big stripes, cool. 😊
And it litterally did NOTHING to the ground.. didn't compress anything. what's the point of it then
Самый оптимальный заполнитель данного катка, это вода! + вес утяжеления можно регулировать.
Я как то об этом не подумал, при этом в воду можно добавить к примеру удобрения но для этого надо иметь достаточное количества отверстий и конструкция должна быть усилена. Впрочем этот приём годен только на газонах и местах выпаса скота.
Or water can be transported if the barrels were PROPERLY cleaned out.
La densité du béton est double de l'eau.
11:11 Stacks of bricks back there? New buildings in the works? Be sure to document that, just like you already did the roller. I like watching buildings being built just as much as the stuff you already do.
well done
magnifique travail
Well done son👍👍
0.40 its not necessary to fill them with water cause oil will not start fire
When you doing the bmw van?
I ja sam napravio sličan, prvo sam mislio da će biti burad, ali nisam mogao da nađem bez ivica, pa sam napravio jedan od kanalizacionog šahta napunjenog betonom, a površina je glatka i ne ostavlja tragove kao kod rebrasta burad
Sweet.
Fantástico,hola,a mi me hace falta algo así con menos diámetro para asentar la tierra,felicidades por tus vídeos y saludos de Jose desde spain
Jel će biti nastavak za tenk?
Imam ideju za tb, da napravis mini prikolicu od pola bureta i 2 prednje vile od bicikla kao tockove
Good video mate, I subscribe to your channel 😉😊👍. Greetings.
bonne idée bravo !
Обычный каток и столько времени для создания и применения. М..да.
If you make one more you'll have almost everything you need to make a Fred Flintstone car. 🤣
Bakan osea bueno😁😃💯👍💪✍️
Simple question: if you are using cement then why do you need metal barrel and long rod lol
q
My question in turn is, what do you know about cement? The number 1 rule to concrete is you need a form to shape it the way you want it. Whether it's steps, sidewalk, driveway. And you always want to have said form prepared before you mix your concrete, otherwise you will be disappointed.
@@damntnmn we use cement molds rather than using metal...
👍⭐
So perfekt
Šta je sa onim kvadom što si pravio i stavio od auta motor
Molim te ako češ ikad praviti korpu za travu na ovoj kosačici snimi kako češ raditi jer problem je kad kosiš mokru travo onda se ljepi na cijev za izbacivanje i sve se zatrpa a za suho nije problem.
Hello my friend how much the 🚜 please
Nisam zadovoljan bačve nisu glatke a na obrađenoj zemlji bi ostali gazovi trebalo bi ih gurati a ne vući
should have cut the top off the drum and then just welded it back on bro......trying to funnel cement looks way more time consuming than it should be
instead of the cement you could have just used water
A solid, unbroken cubic yard of concrete weighs about 4,050 pounds, A yard of water weighs approximately 1,700 pounds. THAT's why. In cold climate, a barrel full of water will freeze, expand and deform the barrel. " You could also have used Styrofoam" , but like water, it's too light.
Est ce que vous pourriez faire un cultivateurs et j adore le roulo
It's really impressive what you can do with simple barrels🛢, so cool 🤩👍
make yourself a welding table
Well sad great idea and a challenge for Doctor DS.
Здравствуйте.Зачем с бетоном заполнить бочки, можно было бы только с водой заполнить.
I would assume concrete is heavier then water would be.
Или песком🤣🤣🤣
That’s like 1800 slump for concrete
KAO I UVIJEK ODLIČAN POSAO ,ALI ZAR NISI TREBAO UZETI RAVNE BAČVE BEZ REBARA JER TA REBRA NA BAČVAMA NAJAČE GAZE IZMEĐU NJIH JE PRITISAK NA PODLOGU MANJI ,TO MOŽEŠ UPOTRIJEBIT SAMO ZA GAZIT TRAVU I NIŠTA VIŠE ...
Jel bi prodao valjak?
Poklonjen je 😁
Next time can you make plow pls??? I folowing you more than 1 year
Kakav je to u apn u pozadini mozes snimiti neki video sa nim
Nice!
Hočeš li raditi video sa ovim APN-om
legendo izbusi ta burat i napravi za rasturanje djubriva po livadi 🤣🤣🤣
Ay napravi tunning kod kosilice 😂
Why don't you build batman's motorcycle???
Hi OK
BMW Pickup please
Ajdeee novi videooo
👌👌✌️✌️👍👍
It’s nice to have fabricating equipment.
Muito bom di mais
Hello nice
So you don't think about the environment at all??! Now you have oil in your ground water.... wtf=?!
He literally washed the oil out
OMG! Please wake up! Or, are you cruising down dirt roads in your horse drawn carriage? Maybe give yourself more time to think this through; geez! 😅
👍👍👍👍👍👍🇧🇷🇧🇷🇧🇷
Jesi zavrsio BMW pick up
Muito bom
Everything is good but drum surface is not equal...I give u 3/10.
Beleza
Daj uradi mesalicu za beton pozdrav
dobro chuvaj APN-6
mesmo
Boa tarde
Why didn't you just fill it with water
I'm guessing because it may rust
@@fabioantonioli6300 1) it must be sealed for water leakage, 2) the barrel is too weak, it might get crushed, 3) concrete is heavier than water, it has a higher effect
Super.
Kool ideas.
Big like.
Subscribe.
Okokokokokokokokokokokokokokolkko