Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Simple and lucid explanation sirThank you for your time and effort✨️✨️
A 6 volt battery should be used intead of power supply unit. Power supply will not give pure DC which in turn may effect to get steady null point.
Very helpful sir
Very nice class👍❤️
Can we connect any part if rehostat?
😚😚
നല്ല potentiometer ഇന്ത്യ യിൽ കിട്ടാനുണ്ടോ? 3months ൽ കൂടുതൽ വർക്ക് ചെയ്യില്ല. ഇപ്പോൾ ലഭ്യ മായത് (elcon &china)
In our lab it is working properly. I shall provide the exact details of potentiometer within a few days.
Here, potentiometer distributed from Educational and Scientific Appliances Thrissur.
@@sreejithkrishnankr hhnnnnvjjuukuuuzuuuuuuuuuzzjjjhhhzggfsz,
First time cheyumbol rheostat adjust cheyyande
Superb.....
Very useful sir, thank you so much👍
Very well explained
10:51
റിയോസ്റ്റാറ്റ് standards എന്തൊക്കെയാണ്...
We dont have 6way key for boards...
Well explained Sir... Thank you so much Sir 👏🏻👏🏻👏🏻
Thank you sir
Calibration of ammeter cheyyyooo
HR?
High Resistance...
@@sreejithkrishnankr well explained Sir, Thank you🤗
Ath pakshe connect cheythilalo@@sreejithkrishnankr
Oh ....we used voltmeter instead .....
Nice class sir ❤️
High resistance vende
In this video high resistance not used. Usually high resistance is used to protect the galvanometer. For far away balancing point position, the HR decrease the current passing through the galvanometer.
ഓരോ റെസിസ്റ്റൻസ് ലും ഉള്ള balancing length alle kaanande?
Vyshak... ഇവിടെ R = 2 ohms ആണ് ഉപയോഗിച്ചിരിക്കുന്നത്.
Rheostat adjust ചെയ്താണ് experiment repeat ചെയ്യുന്നത്.
@@sreejithkrishnankr but nammal resistance change cheythanu exprmnt cheythath.. Keeping rheostat constant.. Atha doubt vanne
Ok... anganeyum cheyaam. Evide refer cheyunna lab manual, rheostat aanu adjust cheyunnath... Secondary circuit rheostat.
Wo l2 kese liya koi batayega plz
from 7.09 of the video...replace the keys in the secondary to include the standard resistance and measure the balancing length... which is l2
Simple and lucid explanation sir
Thank you for your time and effort✨️✨️
A 6 volt battery should be used intead of power supply unit. Power supply will not give pure DC which in turn may effect to get steady null point.
Very helpful sir
Very nice class👍❤️
Can we connect any part if rehostat?
😚😚
നല്ല potentiometer ഇന്ത്യ യിൽ കിട്ടാനുണ്ടോ? 3months ൽ കൂടുതൽ വർക്ക് ചെയ്യില്ല. ഇപ്പോൾ ലഭ്യ മായത് (elcon &china)
In our lab it is working properly. I shall provide the exact details of potentiometer within a few days.
Here, potentiometer distributed from Educational and Scientific Appliances Thrissur.
@@sreejithkrishnankr hhnnnnvjjuukuuuzuuuuuuuuuzzjjjhhhzggfsz,
First time cheyumbol rheostat adjust cheyyande
Superb.....
Very useful sir, thank you so much👍
Very well explained
10:51
റിയോസ്റ്റാറ്റ് standards എന്തൊക്കെയാണ്...
We dont have 6way key for boards...
Well explained Sir... Thank you so much Sir 👏🏻👏🏻👏🏻
Thank you sir
Calibration of ammeter cheyyyooo
HR?
High Resistance...
@@sreejithkrishnankr well explained Sir, Thank you🤗
Ath pakshe connect cheythilalo@@sreejithkrishnankr
Oh ....we used voltmeter instead .....
Nice class sir ❤️
High resistance vende
In this video high resistance not used. Usually high resistance is used to protect the galvanometer. For far away balancing point position, the HR decrease the current passing through the galvanometer.
ഓരോ റെസിസ്റ്റൻസ് ലും ഉള്ള balancing length alle kaanande?
Vyshak... ഇവിടെ R = 2 ohms ആണ് ഉപയോഗിച്ചിരിക്കുന്നത്.
Rheostat adjust ചെയ്താണ് experiment repeat ചെയ്യുന്നത്.
@@sreejithkrishnankr but nammal resistance change cheythanu exprmnt cheythath.. Keeping rheostat constant.. Atha doubt vanne
Ok... anganeyum cheyaam. Evide refer cheyunna lab manual, rheostat aanu adjust cheyunnath... Secondary circuit rheostat.
Wo l2 kese liya koi batayega plz
from 7.09 of the video...replace the keys in the secondary to include the standard resistance and measure the balancing length... which is l2