Just learned that the latest firmware upgrade to 2.1 on newer Gen 2 receivers is the one that actually has the "TextGen" feature for programming, not the 1st release ones, I got a few Gen 2.1 on the way 👍
Thankyou for your time Jim i am still not sure what the on/off feature does and do you leave it off or on,rest of the clip is good still need a another viewing but so much simpler than trying to figure out the Futaba TF8G which is in first class gibberish. Thankyou Chris Bailey (semi Luddiite ! )
Glad that it has been helpful. Which "on/off" are you wondering about? There is one for keeping the stabilization on all the time, one for the throttle low/lock and one for fail safe.
Jim, excellent video for the DX6e and the RadiomasterTx. Have you tried this setup of the LemonRX Gen2 on a DX9? I tried this on my up to date DX9 and in the telemetry empty slot there is no TEXTGEN to select. Have you tried this with a DX9 and did it work?
God bless you jim. when i press system and on the tool screen i dont have all the dsm or spektrum things you have.. it has dsm foward programming and spektrum (int). the rest is frsky crossfire expresslrs ect. i bought my tx16s secondhand with all this on there already. i setup my lemon manually and crashed on take off cause i did it a little wrong..i got it setup now but it would be so much easier and more reasuring doing it your way..i just bought my second plane after my first one being the arrows marlin edf 3 weeks ago i got the bug and bought a futura 80mm.. it hasnt arrived yet but will be putting another lemon in and really want to avoid setting it up wrong again. would really appreciate all your help. kind regards. Brett
Hi Brett, you need to update the firmware in your transmitter. Have a look at ua-cam.com/video/PkQQPBWEr48/v-deo.html. It's a bit on the complicated side. One day I'll produce my own video on how to do that as simple as possible, but for now you can do your best to follow the instructions from others. The Edge TX site has basic instructions, and UA-cam videos give some further help.
Hi Jim. I’ve followed all the steps mentioned in your video with my tx16s and my lemon 10ch RX. But I can’t enter the Textgen. It remains empty. Any idea?
A common issue with many of us. That's why I have been searching for products such as the Lemon RX receivers to bring the costs down without sacrificing quality and capability.
Double check to make sure you have done everything that I've told you to do in the instructions. With your update to 4.0 did you use the version of firmware that goes with the serial number on your radio?
Nick - do you know if this is something that only recent Gen 2 receivers will do? I have a GEN 2 7 channel Stabilised receiver, but I am unsure how old it is (I bought it "new" secondhand, so don't know it's age. How long have you had your LemonRx receiver? Cheers, Mike
Hi jim i was following your video but on my dx6e when i go to telem and scroll, there is no option for text gen, i have “auto config” hovering above my first empty slot. Thing is i just recently updated my 6e so i dont see why i dont see this option. Any thoughts? Great video otherwise
When you go to telemetry, you need to click on a numbered item labelled "Empty." In there you then scroll through a whole bunch of items until you get "Text Gen" and you then click on it.
@@highslideaway That is really strange. All I can say is that I have the same radio, and when you click on the empty slot on it and scroll a long ways, it does have Text Gen.
This a good information, but video kinda lacks on the Spektrum TX how to, no mention of binding 1st to "Auto-Config" ?? Really need a good/detail/slow video on setting up with Spektrum transmitters, hint, hint !! The guys a Grayson Hobby ua-cam.com/video/aOL_Iddin1k/v-deo.htmlsi=Marx-9qiYqalRkoC do a fairly good job with a DX9, they just move a little fast thru the screens for me!! I just ordered 2 new Lemon gen 2, 7+10 channel receivers, upgrading some older DSM2 receivers on good airplanes with my Horizon refreshed DX18 gen2.
Thanks for the helpful feedback. Given that the menu items are the same on the Spektrum, I figured that it didn't need to go through them all again. I'll have a look at the "Auto-Config" matter. And yes, the Grayson Hobby guys do a good job.
Wow this is cool!! I didn’t know that! Thanks Jim!
It's brand new - wasn't available until very recently.
It's brand new - wasn't available until very recently.
@@RCJimdo I need to upgrade something to get it?
I don't know if a simple firmware update will give the Gen 2 features, but I'll ask the guys at the factory.
@@RCJim thanks!
Just learned that the latest firmware upgrade to 2.1 on newer Gen 2 receivers is the one that actually has the "TextGen" feature for programming, not the 1st release ones, I got a few Gen 2.1 on the way 👍
Good to know. It's a great enhancement!
Thankyou for your time Jim i am still not sure what the on/off feature does and do you leave it off or on,rest of the clip is good still need a another viewing but so much simpler than trying to figure out the Futaba TF8G which is in first class gibberish. Thankyou Chris Bailey (semi Luddiite ! )
Glad that it has been helpful. Which "on/off" are you wondering about? There is one for keeping the stabilization on all the time, one for the throttle low/lock and one for fail safe.
I'm looking at the 7 channel basic. Can the gyro be turned on and off from the radio on a switch? Thanks.
Yes, channel 7 is used for that.
Can you add iNav Telemetry Lua Script to Radiomaster TX16s?
Jim, excellent video for the DX6e and the RadiomasterTx. Have you tried this setup of the LemonRX Gen2 on a DX9? I tried this on my up to date DX9 and in the telemetry empty slot there is no TEXTGEN to select. Have you tried this with a DX9 and did it work?
Hi Fred, I don't have a DX9, but I cannot imagine that it couldn't do what could be done with a DX6e. Have you updated your firmware?
Faster with lights
So where's the spectrum finishing ?
So basically he didn't do the spectrum
@@charlesrestivo870 correct- I only go through the menu on the Radomaster because it should be the same with a Spektrum.
God bless you jim. when i press system and on the tool screen i dont have all the dsm or spektrum things you have.. it has dsm foward programming and spektrum (int). the rest is frsky crossfire expresslrs ect. i bought my tx16s secondhand with all this on there already. i setup my lemon manually and crashed on take off cause i did it a little wrong..i got it setup now but it would be so much easier and more reasuring doing it your way..i just bought my second plane after my first one being the arrows marlin edf 3 weeks ago i got the bug and bought a futura 80mm.. it hasnt arrived yet but will be putting another lemon in and really want to avoid setting it up wrong again. would really appreciate all your help.
kind regards.
Brett
Hi Brett, you need to update the firmware in your transmitter. Have a look at ua-cam.com/video/PkQQPBWEr48/v-deo.html. It's a bit on the complicated side. One day I'll produce my own video on how to do that as simple as possible, but for now you can do your best to follow the instructions from others. The Edge TX site has basic instructions, and UA-cam videos give some further help.
Hi Jim. I’ve followed all the steps mentioned in your video with my tx16s and my lemon 10ch RX. But I can’t enter the Textgen. It remains empty. Any idea?
How old is your Lemon RX?
I've got one of these laying here unused. My hobby budget got the Axe and don't know if it will ever come back.
A common issue with many of us. That's why I have been searching for products such as the Lemon RX receivers to bring the costs down without sacrificing quality and capability.
Hi , y my spektrum nx8 4.0 update, does not appear texgen, any idea how coyld i doo that on 4.0 update?
Thanks
Double check to make sure you have done everything that I've told you to do in the instructions. With your update to 4.0 did you use the version of firmware that goes with the serial number on your radio?
@RCJim yea i did, and have a friend with algo a NX8 and algo couldn't do it.
My DX6 telemetry menu does not have "Text Gen" or anything similar. Neither does my DX6, for that matter.
Under telemetry, did you click on an empty slot and then scroll way down, looking for Text Gen? I assume you have updated the firmware on your radio.
has it got a sensitive variometer and good range? looking at this for my gliders. Don't really care about the other functions ha ha
It has a good range. I haven’t tested the variometer, but if you are not in a rush, I’ll test it out over the next few weeks.
Nick - do you know if this is something that only recent Gen 2 receivers will do? I have a GEN 2 7 channel Stabilised receiver, but I am unsure how old it is (I bought it "new" secondhand, so don't know it's age. How long have you had your LemonRx receiver? Cheers, Mike
Hi Mike, My understanding is that this is a brand new development - first available a few weeks ago. Jim
@@RCJim OK - thanks JIm
Hi jim i was following your video but on my dx6e when i go to telem and scroll, there is no option for text gen, i have “auto config” hovering above my first empty slot. Thing is i just recently updated my 6e so i dont see why i dont see this option. Any thoughts? Great video otherwise
When you go to telemetry, you need to click on a numbered item labelled "Empty." In there you then scroll through a whole bunch of items until you get "Text Gen" and you then click on it.
@@RCJim hi him, the problem is when i click on an empty slot and scroll. Theres no option for text gen. I have the most recent update for the dx6e
@@highslideaway That is really strange. All I can say is that I have the same radio, and when you click on the empty slot on it and scroll a long ways, it does have Text Gen.
This a good information, but video kinda lacks on the Spektrum TX how to, no mention of binding 1st to "Auto-Config" ??
Really need a good/detail/slow video on setting up with Spektrum transmitters, hint, hint !! The guys a Grayson Hobby ua-cam.com/video/aOL_Iddin1k/v-deo.htmlsi=Marx-9qiYqalRkoC do a fairly good job with a DX9, they just move a little fast thru the screens for me!!
I just ordered 2 new Lemon gen 2, 7+10 channel receivers, upgrading some older DSM2 receivers on good airplanes with my Horizon refreshed DX18 gen2.
Thanks for the helpful feedback. Given that the menu items are the same on the Spektrum, I figured that it didn't need to go through them all again. I'll have a look at the "Auto-Config" matter. And yes, the Grayson Hobby guys do a good job.
Ok min in nothing yet .Seems like nice guy .Much to slow .But tks for ypur time
I appreciate the feedback.