How to make Motion Sensor Light 💡💡 using IR Proximity Sensor | CD4017 IC Projects
Вставка
- Опубліковано 23 лис 2022
- In this CD4017 project, I have shown how to make simple motion sensor light using 4017 ic and E18-D80NK IR proximity sensor for the washroom. I made this motion sensor circuit on a homemade PCB and used this circuit as the automatic washroom light switch.
To try out the FREE trial version of Altium, click here - www.altium.com/yt/techstudycell
Download the PCB Layout and Gerber for the CD4017 projects from the following article
easyelectronicsproject.com/mi...
When anyone enters the washroom the IR proximity sensor senses the motion and turns on the light, and when he or she exits from the washroom the IR sensor again senses the motion and turns off the light automatically.
The range of the E18-D80NK IR sensor is very good, so it can easily detect motion to control the toilet light automatically.
During the CD4017 tutorial video, I shared the complete circuit for the 4017 ic project, so after watching the video, you can easily make this simple motion sensor switch project using 4017 IC and use it as motion activated light or motion-activated alarm.
During the mini project video, I covered the following topics:
00:15 Quick demo on this motion sensor light project.
00:54 Required components for this electronics project.
01:00 Circuit diagram of the motion sensor.
02:10 How to make the circuit on homemade PCB.
03:23 How to connect motion sensor with AC appliances.
Required components for the Motion Sensor project
1) CD4017 IC
2) BC557 PNP Transistor
3) BC547 NPN Transistor
4) 100uF 25V Capacitor
5) 1000uF 25V Capacitor
6) 220-ohm 0.25watt Resistors - 3 no
7) 1k 0.25watt Resistor
8) 10k 0.25watt Resistor
9) LEDs 5mm - 2no
10) E18-D80NK IR proximity sensor: amzn.to/3ueeKA2
11) 1N4007 Diode
12) 5V SPDT Relay
13) HLK-PM01 5V AC to DC converter
14) Connectors & IC Base
Please refer to the circuit diagram to connect the motion sensor with the AC appliance and switch. Please take proper safety precautions while working on 110V or 230V AC.
After watching the video, you can easily design this motion-sensitive light switch circuit for your home.
If you face any issues please let me know in the comment section.
#motionsensor #4017ic #electronicsprojects
-----------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Website: easyelectronicsproject.com/
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudycell/
-----------
-----------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
-----------
Simple electronics projects playlist:
• Mini Projects
Arduino Home Automation Projects playlist:
• Arduino Projects - Наука та технологія
Exactly what people need right now in home for maximum power saving
Thank you.
This project is working very well
very nice👏👏👏
Awesome
Keep up the good work
Thanks for sharing
Welcome
Very useful
Thanks
can I use this same circuit for 3 bulbs & 1 Fan or do I need to change any component from this circuit
Nice work
Thanks
Superb bro
Thanks
Where can we bought all these components?
Can we use pir sensor with this circut?
Very useful I a
Thanks
Kindly tell what is the min/max range of sensor.
Can we control AC and TV using ESP
I don't have pc.can you please make a video to programme esp8266 by using phone.please help me bro.
Sir please make a vedio explaining the circuit diagram
Sir ic 4017 ko kisi software se download karna hoga
It would be very nice if you could make a video on Using the Esp32 to turn on a light via a motion sensor in a specific time of day with control via Sinric.
Boa tarde. Eu montei esse progeto, mas nada funcionou. O que pode ser? Obg.
Please make home automation project for full home for every room bathroom each and every thing full automation system
Please sir circuit diagram description mein nahin hai sar dikhaiye
Can you share the Circuit diagram of breadboard also
Hello Sir beautiful your project however one thing is missing the LDR light sensor please bring a video with this sensor on arduino
Why should the LDR light sensor be included?
Can we make this on arduino or not?
What is the purpose of 100uf and 1000uf capacitors and how did you calculate its values
Boa tarde. Eu montei esse projeto mas só funciona o led vermelho e o sensor e 18. Mas o relé não quer funcionar pra acender a lâmpada. O que pode ter acontecido? Brasil.
Please make a home automation video using ESP32/ESP8266 + TTP223 TOUCH SWITCH + RELAY MODULE + TASMOTA.
Woooow... Superb..
Very useful project.. ❤️❤️
Thanks
Please sar circuit diagram dikhaiye
Boa tarde. Eu montei esse projeto com placa de fenolite. Mas só o led vermelho acende. O verde não acende e nem o relé tá funcionando. Onde tá o defeito? Obg.
Please sir circuit diagram dijiye sar please
If enter one more person in bathroom, in this situation?
Yes
HLK-PM01 5V AC to DC converter isko bad dekar hum phone charge use korenge to kuch problem hoga kya?
No problem
bc557 ke jagah koi bhi PNP transistor laga ne se kam karega iye circuit ?
Yes. It should work
Please how can pay for 10 pcb boards lam in Uganda east africa
Yah kitne der tak on aur off hoga
Sir ye chahiye apn ko
Bro boards available with you?
not yet
Yah sensor kaise kam Karta hai NPN hai ki PNP hai
Tidak menggunakan rangkain atau circuit electronic, sensor infra red ini bisa berfungsi, hanya dengan power suplly dan relay saja
PCB বোর্ড টা অনলাইন এ অডার করা যাবে ?
Yah sensor yah sensor kaun sa hai NPN PNP please please sir boliya
Circuit diagram dikhaiye yah sir sensor NPN hai ki PNP hai please please boliya sir 🙏🙏🙏
check description
Yah kab tak on rahega aur kab tak off hoga time boliye sir
Hello sir
I will make this but its not working properly
Sensor not working
Compre todos los componentes y no funciona, este proyecto es una estafa
Gr8 project as usual. I'm trying to implement similar concept for wardrobe, when you open the wardrobe door LED's glow, and when close it it will turn off. I will be using 12v 5050/4040 LED strips. Any guidance bro.
Will check
@@TechStudyCell Thanks Bro
@@TechStudyCell please, we are waiting as well.
easiest and most simple is to use a magnetic REED switch, a magnet, 12V power supply and of course the LED strips
a reed switch will clos[NC]e/open[NO] when a magnet is close -
mount the magnet on the door
reed swicth is....say under a shelf near the door such that magnet activates the reed switch when the door is closed
How to make Onion haye counting mission please do this video
With 1hp moter
Circuit diagram please dikhaiye
Please watch the complete video
@@TechStudyCell usme thikse puta nahi chalraha hai please sir circuit diagram dijiye or sansur konsa hai NPN ya PNP hai or raha pe lagega please boliya sir
Sir, ye Jo Ghar me Jane sath light jal Raha hai.
Iske badle me agar ma ek voice add karna chahu to kya karna parega?
Example:- "Ghar me Jane sath ye bolega welcome "
What if 2nd person enter
Use manual switch
If another person enter means what happen...?
Then use manual switch
Instead of hi
E18D80nk Proximity ir Sensor Pnp Hmm Na Npn
Great pls share u r number
I want completed set
Bhai Hindi bol le , taki samjh me aaye sabhi ko
Please bro reply me Gmail....