Hi, i´ve got a question, do you have water leaks or any related problem? i saw you lifted the weatherstripping on the top of driver door so you can run the cable into the led bar. My regards, it was an excellent video.
Hello @Gustavo Benitez :), thank you very much for your response to this video. Your right, the spot where i came out with the cable into the led bar, would be concluded as - a possible watter leak into the car because the seal is a bit lifted. Well the "cable" is pretty flexible from the wirekit, so the first time mount,the seal was more lifted, and with time and door close, the seal bounds pretty around the cable. I didnt recognized any water income in rain, snow - and the lightbar setup is around 1year + mounted on the top with installation. A better way to overcome this situation is also the "angle" of the outcome under the seal, and the curve of the cable - the smoother it is, the easier the seal will bend back when door closed (because the dacia duster 2 door has a good seal to door contact on the top :) which creates pressure. Also to say, with door close and opening every time (seal is in good condition, and the wire doesnt go worn out) - sorry for so much text :). Best Regards Sasa
Hello :) there is no switch in the old manner with cables. The cable kit has a remote control. Powersupply for the lightbar has a „receiver unit“ and with remote you can turn the light on and off also outside of the car. I will post the amazon link to the wiring kit with remote control :)
Hello Emrah Günaydin - the problem with led bars is, if some of the leds are broken you have to "replace" the whole bar. It is possible for a electrician to "bridge" the broken leds, but it wont last long. and i think its cheaper in a total to replace the whole bar - because "led lightbars" are becoming affordable nowadays. I tried the same on a led spotlight - 2 leds were broken, and i "bridged" them - when i turned the "AC Power ON" - bzzz - the next leds burned down,... so its gone. most of the "leds" in such lights are "serial connected" - so if one breaks, the rest doesnt work correctly. Hope this info helped a bit
Google Translate in Turkish: Merhaba Emrah Günaydin - led çubuklarla ilgili sorun, bazı ledler kırılırsa, tüm çubuğu "değiştirmeniz" gerekir. Bir elektrikçinin kırık ledleri "köprülemesi" mümkündür, ancak uzun sürmez. ve bence onun tüm bar yerine toplam daha ucuz - çünkü "led lightbars" günümüzde uygun hale geliyor. Ben aynı led bir spot ışığı üzerinde denedim - 2 led kırıldı ve ben onları "köprüledi" - "AC Güç AÇIK" - bzzz - bir sonraki led yandı, ... bu yüzden gitti. bu tür ışıklar "led" çoğu "seri bağlı" - yani biri kırılırsa, geri kalanı düzgün çalışmıyor. Umarım bu bilgi biraz yardımcı olmuştur
Hello Mark, my Setup is: 2x Rhino Rack RSB02S Bars (silver) - but beware, you also Need the mount kit 1x Rhino Rack RSK02 for the Bars. And you have to "size/crop" one bar around 1-2 cm, because its "a bit lager" . i made this too, because the smaller sizer is too small, and the other models are tooo Long for our rails. the front will fit with ease, the rear bar has to be cropped (material is Aluminium). Here are the links for Image: 2x www.offroad24.de/index.php?artnr=50-10RSB02S&view=detail&lang=EN 1x www.offroad24.de/index.php?info=Rhino-Rack-Montagekit-RSK02-lang-für-Stealthbar-für-zwei-Querträger&view=detail&artnr=50-11RSK02&pli=1031010050&lang=EN Thanks for your Feedback :), going to make a new Video soon!
Add arround 6-8cm to the Middle of the rail. So if you mount the rhino with the stealthbars from rhino you raise your duster around to 6-8cm higher from the rails original. And then add your roof tent. Im also thinking about a rooftent from frontrunner featherlight because it has the smallest height and weight too
@@SasaBuilds thanks a lot for all your answers !! I'm might be going for the James baroud explorer M. Bit not sure if it will be the right fit... Being in France I need to remain under 2m for tolls and parking reasons !
@@kryptonit973 Hello Thibault, thanks for your Response :). Wow i didnt know about the height issue with stayin below the 2meters OO. Hopefully my Feedback helped you. Going for new Videos soon !
Hallo Michael :), doch wäre auch was gewesen - nur bin ich zuerst auf RhinoRack gestoßen - via Taubenreuther, erst danach hab ich FrontRunner entdeckt nachdem ich schon bestellt hatte :D. Sind beide Top Hersteller, wobei Frontrunner denke ich in unseren Kreisen eher gängiger ist. Aber es wird vielleicht dafür einmal ein FrontRunner Featherlight Dachzelt werden. Lg DaciaDuster AllRoad
hi! there is not too much water infiltration by passing the wire behind the roof seal??
Hi, i´ve got a question, do you have water leaks or any related problem? i saw you lifted the weatherstripping on the top of driver door so you can run the cable into the led bar. My regards, it was an excellent video.
Hello @Gustavo Benitez :), thank you very much for your response to this video. Your right, the spot where i came out with the cable into the led bar, would be concluded as - a possible watter leak into the car because the seal is a bit lifted. Well the "cable" is pretty flexible from the wirekit, so the first time mount,the seal was more lifted, and with time and door close, the seal bounds pretty around the cable. I didnt recognized any water income in rain, snow - and the lightbar setup is around 1year + mounted on the top with installation. A better way to overcome this situation is also the "angle" of the outcome under the seal, and the curve of the cable - the smoother it is, the easier the seal will bend back when door closed (because the dacia duster 2 door has a good seal to door contact on the top :) which creates pressure. Also to say, with door close and opening every time (seal is in good condition, and the wire doesnt go worn out) - sorry for so much text :). Best Regards Sasa
Hello, installation has become very cool. How did you position the switch in the passenger compartment? From the engine compartment? Greetings
Hello :) there is no switch in the old manner with cables. The cable kit has a remote control. Powersupply for the lightbar has a „receiver unit“ and with remote you can turn the light on and off also outside of the car. I will post the amazon link to the wiring kit with remote control :)
Merhaba diyelim LED’lerin bir kısmı yandı komple değişim mi olacak yoksa parça parça içerisindekiler değişim oluyor mu
Hello Emrah Günaydin - the problem with led bars is, if some of the leds are broken you have to "replace" the whole bar. It is possible for a electrician to "bridge" the broken leds, but it wont last long. and i think its cheaper in a total to replace the whole bar - because "led lightbars" are becoming affordable nowadays. I tried the same on a led spotlight - 2 leds were broken, and i "bridged" them - when i turned the "AC Power ON" - bzzz - the next leds burned down,... so its gone. most of the "leds" in such lights are "serial connected" - so if one breaks, the rest doesnt work correctly. Hope this info helped a bit
Google Translate in Turkish: Merhaba Emrah Günaydin - led çubuklarla ilgili sorun, bazı ledler kırılırsa, tüm çubuğu "değiştirmeniz" gerekir. Bir elektrikçinin kırık ledleri "köprülemesi" mümkündür, ancak uzun sürmez. ve bence onun tüm bar yerine toplam daha ucuz - çünkü "led lightbars" günümüzde uygun hale geliyor. Ben aynı led bir spot ışığı üzerinde denedim - 2 led kırıldı ve ben onları "köprüledi" - "AC Güç AÇIK" - bzzz - bir sonraki led yandı, ... bu yüzden gitti. bu tür ışıklar "led" çoğu "seri bağlı" - yani biri kırılırsa, geri kalanı düzgün çalışmıyor. Umarım bu bilgi biraz yardımcı olmuştur
Hi what roof bars did you use?
Hello Mark, my Setup is: 2x Rhino Rack RSB02S Bars (silver) - but beware, you also Need the mount kit 1x Rhino Rack RSK02 for the Bars. And you have to "size/crop" one bar around 1-2 cm, because its "a bit lager" . i made this too, because the smaller sizer is too small, and the other models are tooo Long for our rails. the front will fit with ease, the rear bar has to be cropped (material is Aluminium).
Here are the links for Image:
2x www.offroad24.de/index.php?artnr=50-10RSB02S&view=detail&lang=EN
1x www.offroad24.de/index.php?info=Rhino-Rack-Montagekit-RSK02-lang-für-Stealthbar-für-zwei-Querträger&view=detail&artnr=50-11RSK02&pli=1031010050&lang=EN
Thanks for your Feedback :), going to make a new Video soon!
Love the rhino rack hat are the dimension?
Hello :), the rhino rack pioneer platform dimensions are : 1478X1184MM
@@SasaBuilds thanks a lot !! I have the 2019 Dacia. And I want to put a roof top tent on it. Do you know the height of you Dacia with the rhino rack ?
Add arround 6-8cm to the Middle of the rail. So if you mount the rhino with the stealthbars from rhino you raise your duster around to 6-8cm higher from the rails original. And then add your roof tent. Im also thinking about a rooftent from frontrunner featherlight because it has the smallest height and weight too
@@SasaBuilds thanks a lot for all your answers !! I'm might be going for the James baroud explorer M. Bit not sure if it will be the right fit... Being in France I need to remain under 2m for tolls and parking reasons !
@@kryptonit973 Hello Thibault, thanks for your Response :). Wow i didnt know about the height issue with stayin below the 2meters OO. Hopefully my Feedback helped you. Going for new Videos soon !
Endlich mal eine gute Umsetzung des Themas..... Frontrunner war keine Alternative?
Hallo Michael :), doch wäre auch was gewesen - nur bin ich zuerst auf RhinoRack gestoßen - via Taubenreuther, erst danach hab ich FrontRunner entdeckt nachdem ich schon bestellt hatte :D. Sind beide Top Hersteller, wobei Frontrunner denke ich in unseren Kreisen eher gängiger ist. Aber es wird vielleicht dafür einmal ein FrontRunner Featherlight Dachzelt werden. Lg DaciaDuster AllRoad