How to Make This Wooden Christmas Tree! DIY Wooden American Flag
Вставка
- Опубліковано 1 гру 2022
- Thank you for watching!
If you enjoyed the video please Like and Subscribe!
Please leave any video recommendations down below!
Follow me on Instagram: maxf_yt
Order the wooden Star cutouts here: a.co/d/iDczW3L
Music Credits
Track: Ikson - Alive [Official]
Music provided by Ikson®
Listen: ikson.lnk.to/aliveyt - Навчання та стиль
Great idea you could use a piece of thin plywood cut to shape as a back
Thank you and thats a really good idea!
If you place the brad nailer or pin gun closer to the front edge of board and angle slightly to the back side; as long as the nail isn't too long; it should go in without busting out. In other words; a brad nail or pin going in at an angle tends to go at that angle. But if you try shooting it straight down from the center of the board; it can go in either direction and have better chance of busting out.
Красиво і патріотично водночас! Неймовірна ідея!
I don’t have to tell you Max, but you are so talented! Love both trees, just beautiful!
Thank you so much Faith!! 😁
Great, quick little seasonal project. Specially since it's another idea on how to use up scrap. Thank you for talking about "errors" that come up, even for those with experience. Always a good reminder that it almost never goes perfect, but it can still be corrected, or left as part of the character of the piece. Also liked the quick talk about different ideas on how to put it together. As always Max, great job.
Thanks a lot for the feedback Shane I really appreciate it!!
Very Nice Bud! I Like That! 🤝
I was looking at the top and saying that you can also make small one's with the top three and cut the stime slimmer and you have a ornament for Christmas 🎄
Hey I missed this one! 😄
Really neat tree. I made one following your method except I made a backer out of thin plywood, maybe 1/8" thick. After I cut the tree out and put it together, I traced it out on the plywood, then redrew it about 1/4" inside the line I traced. I cut this out on the scroll saw and it fit just inside the outline of the tree. I glued and pin nailed it together from the back. Worked great! Thanks for the idea!
Thank you! Thats a great idea!
I need the measurements for the tree please
They look great! You always make the projects look easy! Thank you
... which they aren't for non-normal people like ME 😁
Thanks a lot Richard!! 😁
@@markmiller-summer473 i do have the benefit of speeding up the videos so they look easier when people are watching 😁 you got this Mark! 💪🏼
Awesome work! I highly recommend get some CA Glue and activator for holding stuff together while wood glue dries as well as putting those stars on. Stuff is magic. Keep making videos man. You have awesome ideas.
Thanks a lot man!
Love it! They look great Max
Thank you Mark!!
They are great. I really like both styes you made. Another very good project, Max. Merry Christmas !!
Max, you did a good job on these trees. I really like them. Thanks!
Looks great. Luv em
Love it! I can see making a few for Christmas gifts!
What are the dimensions cuts?
These are great ideas! I definitely want to try making these!
Great job looking good thx for sharing enjoyed it
Thank you Larry!
I think they turned out great! Have you ever considered making a larger version out of pallets?
Thank you!! I have not but thats a great idea!!
Yes. I will take a bigger one for outside my front door next Christmas! 😊
nice
What if you drilled and added dowels to help hold them together?
Thats a great idea! Would definitely be a lot stronger than my version! Thank you for the feedback!
Turned out great brazillian flag please
Oh and to make it qui ker use your circle slal
Or put a hinge on the side of the block so they’d be easier to pack up after Christmas. 🤷
Good idea!
I need the size for each pieces
I make the standard flag size that I sell at gun shows so what do you feel I could sell these for? How long did it take to build each flag? Thanks and Merry Christmas
I LIKE HOW YOU THINK 🌲🌲🌲🌲🌲
I write ✍️ as the video 📹 goes or I will forget but /and if Noone has said/though of it you can do a retht rieth
Et on dit que les français parlent beaucoup pour ne rien dire 🤣
First
Thank you 😁
I know this music is trendy right now but I think it's over used, IMO your videos are better WITHOUT it. Just my opinion
Ongggghh