I laughed when you mentioned the engine noise from the skid plate. I recently purchased a tw with the same skid plate and the first thing I noticed was how much engine noise there was.
That Was Pretty Good, Man! Yeah, At 5:50 You Talk About Dropping It Off A Cliff & That Made Me Think Of Timerider! I'm Saving This Video, In Case I Ever Get One.
Thank you!! It works. I'm going to redo with mat all the way to the edges then seal the edges. Only issue is getting mud and small rocks trapped. But that's fixable too. Let me know how it goes for you..
Thanks... Pain in the ass getting the rear on, but 200% worth it. Front is currently an IRC JX8 Gekkota Hard Enduro Tire, rear is a very solid Tyre Guider Atlas.
The first mod should ALWAYS be replacing the front tire (the DethWing) with Shinko 241. It will save you from dumping your bike on a rain slick road in a sharp turn.
Skip the 241.. if you offroad. It's not a tire that would touch this bike again for dirt. It's a great road tire, loved it there. Offroad fronts - M5B EVO and JX8 Gekkota proved out for beyond my skill. Thanks for the comment.
It has a deflection issue, lots of bar wag. I didn't know it did that until I replaced it with the M5B EVO and the wagging ended. Also I haven't dumped it since it's been off, 1yr now. It's designed for 3 to 5psi, at 8 plus it's operating outside of design. Much better is out there. If you're mostly offroad spend a few bucks try something else. M5B is kinda heavy, but it's really good. JX8 Gekkota on a wash instantly grabs again, to get it to wash you really have to be doing something. I read the forums on the 241 like everyone else, but they should attach a riding video with the review. Are they going to Walgreens or hammering offroad? I'm not a fan, much, much better is out there. Thanks
Was there much to do with cable routing, wiring to fit the protaper woods bend high bars and the risers. Thanks for the video it was informative and I enjoyed watching.
I just rerouted the clutch cable, no issues. It's long enough with Woods High and Rox 2" Risers. I'd buy again. I think I put a link for the bars in the video description. Thanks for the comment and watching DSA!
I've got one video up about this and I filmed a follow-up that will be up soon. Front IRC M5b EVO 130 80 18, Rear Tyre Guider Atlas 26x8x14. It's a trail setup, limited road. Thanks for watching!
Try out some Progrip 714's, they're thick gel handlebar grips and are really nice. I put them on my first dual sport and liked them so much I bought them again when I got my 2nd dual sport
Question for you, Did you have to lengthen your cables for the riser or handle bars. I'm only looking to get about 2 in of rise. Maybe just getting the new handle bars would be enough?
Hey sir, did you have to purchase extended throttle cable, clutch cable and a longer brake line due to the handlebar rise?!?! I’m looking to put the same bars on my tw. Thanks !
OEM cables work, reroute the clutch cable. I may have done the same with the front break, but don't remember doing it. Your stock cables are long enough for sure. Thanks for watching..
I'm going to make another mod video to update. If I can I'll give better details. I've been waiting for negative Temps that keep me off the bike. Thanks for watching DSA!
Pro Taper Woods High bars are aluminum alloy. I said steel in the video, stock bars are steel. So reverse that...
I think you'll find that you get way more views on mod videos, these are great. Thanks!
Thanks..
@@dualsportapocalypse Yeah, a self-cancelling turn-signal mod would be perfect for you! ; )
I just tested out my HippoHands Backcountry wind-stoppers while in some cold temps and rain in Idaho. Totally worth the price.
Good to know... Thanks.
Been looking forward to this series from you, thanks.
I made 4 mod videos, here's 1# for ya.
I laughed when you mentioned the engine noise from the skid plate. I recently purchased a tw with the same skid plate and the first thing I noticed was how much engine noise there was.
That Was Pretty Good, Man! Yeah, At 5:50 You Talk About Dropping It Off A Cliff & That Made Me Think Of Timerider! I'm Saving This Video, In Case I Ever Get One.
It's pretty tough, it'll take a pretty hard hit to bend or break.
@@dualsportapocalypse I Believe It But Did You Watch Timerider: The Adventure Of Lyle Swann? 8-)
I'll check it out! Thank you...
I'm watching it.. Thanks for the recommendation!!
@@dualsportapocalypse Well If You Like That, You're Gonna Love This! ua-cam.com/video/XcTt5W9aVpI/v-deo.html
Nice Mods! Great heads up and remedy for the skid plate noise.
Thank you!! It works. I'm going to redo with mat all the way to the edges then seal the edges. Only issue is getting mud and small rocks trapped. But that's fixable too. Let me know how it goes for you..
Spray on Truck bed liner would fix the skid plate.
I wish Yamaha would make a TW 300. Keep the bike as is, just drop a 300cc motor in it
I'd take it! Would be plenty of power.
Wouldn't be that difficult to bore the 200 out a bit.
That ending was epic.
I had to check, not sure if it was the one where I was grabbing my chest crying for momma. Thanks
Great looking T-Dub! Thanks for the inspiration!
Thanks.. I need to update with a new mod video, a few more added..
Nice work on the bike can’t wait to get mine ,thanks for the great video.
Thank you!
Crazy offroad tires bro. lol
Thanks... Pain in the ass getting the rear on, but 200% worth it. Front is currently an IRC JX8 Gekkota Hard Enduro Tire, rear is a very solid Tyre Guider Atlas.
I went with a IMS shifter 13114. Didn’t care for the stock one. Much more positive shifting and looks great with the IMS super stock foot pegs.
Is that shifter any longer than the stock?
I probably won't be changing the shifter. I need it as tight to the bike as I can get it for bushwacking and if I bend it it's easy to bend back.
@@hazcat640 it is a little bit longer. I like that too.
I doubt that plate is made out of 5/16 alum. Prob more like 1/4 or 3/16. Sure doesn’t look like 5/16
Them tires 👍🏻👍🏻
They ride better than I have the skill to push them. Thanks
I've been looking for a video regarding the performance difference in the Big Bore and stock.
I'm stock engine with external mods. That would be a question for Yamaha TW200 forum. Thanks
The first mod should ALWAYS be replacing the front tire (the DethWing) with Shinko 241. It will save you from dumping your bike on a rain slick road in a sharp turn.
Skip the 241.. if you offroad. It's not a tire that would touch this bike again for dirt. It's a great road tire, loved it there. Offroad fronts - M5B EVO and JX8 Gekkota proved out for beyond my skill. Thanks for the comment.
@@dualsportapocalypse I use it on dirt with no issues. What was your experience?
It has a deflection issue, lots of bar wag. I didn't know it did that until I replaced it with the M5B EVO and the wagging ended. Also I haven't dumped it since it's been off, 1yr now. It's designed for 3 to 5psi, at 8 plus it's operating outside of design. Much better is out there. If you're mostly offroad spend a few bucks try something else. M5B is kinda heavy, but it's really good. JX8 Gekkota on a wash instantly grabs again, to get it to wash you really have to be doing something. I read the forums on the 241 like everyone else, but they should attach a riding video with the review. Are they going to Walgreens or hammering offroad? I'm not a fan, much, much better is out there. Thanks
@@dualsportapocalypse Heavy tires don't bother. I'll take a look at the M5B EVO.
It's a great tire, I've taken very hard 90* turns with it. It's not on my bike currently, but I'd put it back on.
Try rubberized under coating on the skid plate
My thought, too
That's a good idea, anything to cut that reflected noise do it! Thanks
I wanna hear about that exhaust and what kind of jetting you had to do
It's in an Upcoming video.
That is nice. Did the bigger tires hurt the mph
You'll need to run a 55t rear sprocket to balance it out. Very similar speeds.
So what is the Brand of the hand guards and where you can buy them? The metal looks solid! Thanks for your help👍
www.highwaydirtbikes.com/ Give them a call, to verify model.. Thanks for watching!
Was there much to do with cable routing, wiring to fit the protaper woods bend high bars and the risers. Thanks for the video it was informative and I enjoyed watching.
I just rerouted the clutch cable, no issues. It's long enough with Woods High and Rox 2" Risers. I'd buy again. I think I put a link for the bars in the video description. Thanks for the comment and watching DSA!
I'm curious about your tire upgrade, sir
I've got one video up about this and I filmed a follow-up that will be up soon. Front IRC M5b EVO 130 80 18, Rear Tyre Guider Atlas 26x8x14. It's a trail setup, limited road. Thanks for watching!
Yes, and no dumb questions. I started at zero...
I'm currently running an IRC JX8 Gekkota front, 110 -100 -18. Just made a video.
I just bought 2020 i realy like all your upgrades and would like to know where to buy I live in northern ontario
Thanks. Check the show notes on some of the older videos. I put many links there
That apocalypse will last a tank of gas and then what?
sounds like a damn tractor
Try out some Progrip 714's, they're thick gel handlebar grips and are really nice. I put them on my first dual sport and liked them so much I bought them again when I got my 2nd dual sport
I'll look into those.. Thanks.
Question for you, Did you have to lengthen your cables for the riser or handle bars. I'm only looking to get about 2 in of rise. Maybe just getting the new handle bars would be enough?
I just rerouted the cables that felt tight. 2in Risers and woods high bar. Thanks
How do you like the factory seat ?.. I’m shot after a hour or so
Same..it's not ass friendly at all. I haven't researched seat mods yet, but it'll be upgraded too.
@@dualsportapocalypse Mad Dog seat pad $18. It's fugly, but for the low price, why not?
Seat concepts for the win.
What tires are those? I need to put some on mine
ua-cam.com/video/W9AvZofPHY4/v-deo.html
What tires do you have on this
amzn.to/3LT2v4g
amzn.to/3MdfCyo
Hey sir, did you have to purchase extended throttle cable, clutch cable and a longer brake line due to the handlebar rise?!?! I’m looking to put the same bars on my tw. Thanks !
OEM cables work, reroute the clutch cable. I may have done the same with the front break, but don't remember doing it. Your stock cables are long enough for sure. Thanks for watching..
Do you have links for your mods?
I'm going to make another mod video to update. If I can I'll give better details. I've been waiting for negative Temps that keep me off the bike. Thanks for watching DSA!
Never had any issue with the size of foot pegs. They are small so you don't kock your ankles when you dog walk it.
Thanks for the info..
What tires?
ua-cam.com/video/W9AvZofPHY4/v-deo.html
None of that necessary
Thanks Earl the challenged?