The first two questions any human must ask when they see something that exists are "Can it run Doom?" and "Can it play Bad Apple?". Nothing else matters.
After seeing the thumbnail, I am so glad these were all first layer prints. Dude probably would have started this project when the meme first started if he had to wait for every frame to become a foot-tall statuette
The printer sounds like it’s in agony but despite it, it wishes to continue to sing. Wonderful work, and let’s see on what else we can port this song and video
I used my fingernails It's not actually from the tool, but it's actually the plastic peeling the coating as it prints layer by layer. Remember- there are about 1000 frames in this video. That's several hundred more than the printbed is designed for.
If there’s one thing that makes me happy it’s the knowledge that if a machine makes a noise then we will play a song on it We did this with the mars rover, which played “happy birthday” by scanning different parts of its environment I believe?
I was NOT expecting the printer to be making the audio too, this is just too creative! God this meme makes me so happy, as someone that was OBSESSED with bad apple when I was like 12 when it came around the first time this is amazing to see people go nuts with.
i love seeing things like this in my recommended, even after all these years bad apple finds its way to me, amazing job. Especially with what im assuming is the motors as the music, so cool
Stepper motor music is pretty common x3 I think there's a few channels dedicated to that. Just search up some popular song, and add stepper motor to the search.
Damn, you have more dedication than me. I almost did the same thing, but I just couldn't stomach the thought of sitting in front of my printer for that long. Props to you!
there's a video that's I think bad apple but it's a moving crosssection of a 3d volume, and if you printed each layer without clearing the prior ones that's what you'd end up with, which would be pretty dope lol
The voltages are actually constant, but what changes is the rate of steps sent to the motor. Stepper motors work by moving 1 step at a time, so if you send steps at the same frequency as a note, then it will play that note. I don't need any custom firmware, all I need to know is how many steps the printer moves per millimeter, then using duration and pitch of the note I can tell the printer where to go and how quickly to go there. Lots of people have done this before, so I used a slightly modified version of someone else's code.
Are you kidding me? Those stars are TINY. Printers cannot go THAT in-depth, and even if they could, the stars don't even matter! Worry about something else in a video that actually deserves hate.
wow just wow. the onlything that could make this better is the frames being fully printed each time instead of outlined but that could up the cost substantially. Edit: 5 Months Later... wow this is the most likes I have ever had on a comment. look at me mom I am famous I would like to thank Bad Apple.
It wasn't really a cost problem, but more of a time problem. With just the outline, each frame took 1-2 minutes to print, and with 1000 frames that's a minimum of 15 hours of me sitting there and scraping off each frame. If it filled it in, then it would instead take 3-6 minutes each frame, increasing the time exponentially. I suppose I could have made them smaller to compensate, but then I'd lose out on the finer details.
@@JackLuckSack Use a IDEX printer and have each frame as a layer? would be interesting how tall the final print would be. could probably play the bassline and melody seprately with that
Other people have done that, someone played it on their X1 carbon with black and white filament. The bassline and melody are played separately on the x and y motors, you don't need 2 heads to play them. Having more motors would be nice, but it's not necessary for a song like bad apple. Something I might do in the future is to get a resin printer and play it on that, but then i have to buy a resin printer and my dorm is very small lol
I am grateful and impressed that a 3D printer has been able to reproduce a video that was popular in Japan more than 10 years ago by a person from overseas. 日本訳 10年以上前に日本で流行っていた、動画を海外の方が3Dプリンタで再現してきたたことに感謝と感動
oh WOW this is a lot first off, the 3d printer sounds are amazing. they're really really cool and i'd love to recreate it somehow even though i don't have a 3d printer lol. it sounds like it's struggling, and gives sounds so robotically alive, it's gorgeous. secondly, at 1:50 and 3:30 the harmony is different than the original! the bass note is on the third so the chord is no longer the same, and it turned out pretty cool. i don't know how you turned the music into something the 3d printer understands, but either if you did the notes by hand or it was converted from the audio file, it's maybe because the lowest notes couldn't be played? or it picked up a harmonic of the bass or something? either way, it sounds cool reharmonized. and the second time even happens on the key change, so it blew me away even more also, that's a lot of dedication for a youtube video lol. huge props
Yeah, the gcode file is generated using a midi to gcode converter. I usually go into the midi and clear out the lower notes because volume is correlated to pitch on the printer (and I can only play 2 notes at a time), so that's probably what you noticed.
@@JackLuckSack yeahh that's what happened then. for it to have the same harmonic context of the original, it should have been a Bb C and D on the bass (like the rest of the song, but held down), but this way turned out cooler in my opinion lol
The printing was probably pretty quick for each frame (depends on the printer, those things are *fast* these days) I wonder what it was like printing all those individual frames
im glad you used minimal amount of filament, i know people say it would look better but it's good for the environment to not print things youre going to throw away
do NOT scan the QR code on the printer!!!
this is a lie
dammit
You convinced me to do this. DO NOT DO THIS UNDER ANY CASE
This is the worst thing I did in my life, DO NOT SCAN IT!!!!
I tried scanning.... it wouldn't let me. Guess I'll never know.
"Hey bro, what instrument do you play?"
"3D Printer."
"What?"
Did I stutter?
"Just look"
The first two questions any human must ask when they see something that exists are "Can it run Doom?" and "Can it play Bad Apple?". Nothing else matters.
Hardware version: Doom
Video version: Bad Apple
Audio version: Megalovania
"Can I open ao3 on it?"
Scientific calculator:
- Can run DOOM
- Can play Bad Apple
- Is therefore optimal hardware
May I present the ideas of Bad Apple in Doom and Doom in Bad Apple?
Then there's also the alternative "But can it run Crysis?"
After seeing the thumbnail, I am so glad these were all first layer prints. Dude probably would have started this project when the meme first started if he had to wait for every frame to become a foot-tall statuette
Would be pretty funny to have over 1000 bad apple 2d planes sitting around the house though lol
@@JackLuckSack Could be a giveaway opportunity, or a for-charity auction
@@webbugt but who would need these-
@@kiwi9065 me
@@kiwi9065who wouldn’t
The printer sounds like it’s in agony but despite it, it wishes to continue to sing. Wonderful work, and let’s see on what else we can port this song and video
on brand with the song as its about someone contemplating suicide
Sounds like the song kokoro
@@artsyscrub3226moreso depression, also the nes game came first
NAW DA PRINTER IS ON FIREE 🔥 🔥 🔥 🗣🗣🗣
The disappearance of hatsune miku vibes haha
This is the first time I see someone making Bad Apple by recreating not only the video, but also the audio as well!
Real
There's a tesla coil/laser show one that does that! Both are super impressive
@@limesandlemons1367Also, Bad apple on MK-90 (chiptune sound)
second time for me
A Bad Apple video in my recommendations that isn't 12 years old.
The community is still thriving
That is some insane first layer calibration.
Properly configured bed mesh leveling, I really recommend adding it to your printer if it doesn't have it!
ngl, I am widely jealous
@@chyrt who needs mesh leveling when you're simply built different (i'm not built different, the printer is stock and doesn't have mesh leveling)
@@JackLuckSack the bed leveling defeated me and now my printer hasn't woke up in a few months and is just collecting dust as a hobby
@@chinnudanturi9730what printer do you have?
Something about 3D printer motors making sounds like these are fascinating to my ears
If you want more look up stepper motor music
Look up "device orchestra" or "floppytron"
I think the best part is the combination of the visuals AND the fact that you PRINTED THE MUSIC.
Watching that bed surface deteriorate was a bit painful but amazing work nonetheless
fr , comparing first 10 sec to last 10 sec is painfull
yeah, probably time to get a plastic scraper instead
@@roowut Or softer, bronze scraper with steel backbone.
I used my fingernails
It's not actually from the tool, but it's actually the plastic peeling the coating as it prints layer by layer. Remember- there are about 1000 frames in this video. That's several hundred more than the printbed is designed for.
@@JackLuckSackYOU USED YOUR FINGERNAILS.!?!?!
God damn that must have HURT good lord
Sounds like some very old 8-bit remix
Honestly my favorite version of the song I’ve ever heard
@@batlover1977same
If there’s one thing that makes me happy it’s the knowledge that if a machine makes a noise then we will play a song on it
We did this with the mars rover, which played “happy birthday” by scanning different parts of its environment I believe?
It sings happy birthday to itself.
0:13 Probably because I have a crappy laptop but that is the fastest copy and paste of files I’ve ever seen.
You combine each frame into the same structure and get a cool-looking tower that changes with each frame
Search up bad apple but a slice of volume
@@CJBox9tskr
@@CJBox9of course this exists already lmao
I thought you were about to print a 3-D version of it, and I was about to cry over how much filament that would be 😂
Me too
Same lol
I love it how you can see the print board slowly getting slightly more scratched and minorly damaged over the video
playing bad apple on anything immaginable may be one of the best parts of internet culture ever
It's so cool to see the build plate get messier and messier as it goes on
I was NOT expecting the printer to be making the audio too, this is just too creative!
God this meme makes me so happy, as someone that was OBSESSED with bad apple when I was like 12 when it came around the first time this is amazing to see people go nuts with.
I wanna see bad apple but it's in the file transfer graph of windows like at 0:20
good idea
But how
i love seeing things like this in my recommended, even after all these years bad apple finds its way to me, amazing job. Especially with what im assuming is the motors as the music, so cool
Stepper motor music is pretty common x3
I think there's a few channels dedicated to that. Just search up some popular song, and add stepper motor to the search.
My man can print the cleanest first layers in history and chooses to do this...
Based
“Honey, the printer’s singing bad apple again”
the way the square was scraped off so many times it started to become permanent
This "trend" is still alive!! such a creative addition!!
it'll most likely never die
"Playing bad apple on my time machine" @@EngiNetion
I feel like a lot of the versions of bad apple I see either change the audio or visuals and I am glad to see you recreated both
especially when its on some obscure thing that doesn't seem like it could do it like a graphing calculator or something
the ball of filament after was so good.
Damn, you have more dedication than me. I almost did the same thing, but I just couldn't stomach the thought of sitting in front of my printer for that long. Props to you!
Completely worth the 1 year wait!
there's a video that's I think bad apple but it's a moving crosssection of a 3d volume, and if you printed each layer without clearing the prior ones that's what you'd end up with, which would be pretty dope lol
someone did that! you can search for bad apple played but its a 500 hour 3d print. their printer is much more expensive than mine
This is not what i was expecting,
However i am left more in love with what ive discovered than what was anticipated
I freaking LOVE this!!!!
Woah pretty impressive! I bet you used variable voltages for the motor to make the music! As since it’s a stepper motor every movement makes sounds
The voltages are actually constant, but what changes is the rate of steps sent to the motor. Stepper motors work by moving 1 step at a time, so if you send steps at the same frequency as a note, then it will play that note. I don't need any custom firmware, all I need to know is how many steps the printer moves per millimeter, then using duration and pitch of the note I can tell the printer where to go and how quickly to go there. Lots of people have done this before, so I used a slightly modified version of someone else's code.
Ahh I see @@JackLuckSack
imagine 3d printing in the middle of the night and hearing this
of all bad apple renditions, this one has no excuse not to include the stars at 0:41
It's actually a bit harder than one might believe to print something like that
Are you kidding me? Those stars are TINY. Printers cannot go THAT in-depth, and even if they could, the stars don't even matter! Worry about something else in a video that actually deserves hate.
i unnironically really like this version of the song
wow just wow. the onlything that could make this better is the frames being fully printed each time instead of outlined but that could up the cost substantially.
Edit: 5 Months Later... wow this is the most likes I have ever had on a comment. look at me mom I am famous I would like to thank Bad Apple.
It wasn't really a cost problem, but more of a time problem. With just the outline, each frame took 1-2 minutes to print, and with 1000 frames that's a minimum of 15 hours of me sitting there and scraping off each frame. If it filled it in, then it would instead take 3-6 minutes each frame, increasing the time exponentially. I suppose I could have made them smaller to compensate, but then I'd lose out on the finer details.
@@JackLuckSack Use a IDEX printer and have each frame as a layer? would be interesting how tall the final print would be. could probably play the bassline and melody seprately with that
Other people have done that, someone played it on their X1 carbon with black and white filament. The bassline and melody are played separately on the x and y motors, you don't need 2 heads to play them. Having more motors would be nice, but it's not necessary for a song like bad apple. Something I might do in the future is to get a resin printer and play it on that, but then i have to buy a resin printer and my dorm is very small lol
I prefer it this way. It makes it more varied and the sharp lines make the viewer fill in the frame anyway, which is imo more satisfying
I like it more without it being filled in personally. It reminds me of vector art from the early 80s
genuinely, a 3d pronter may be one of, if not my favorite music instrument/hj
it sounds so cool and i loved listening to it so much
I am grateful and impressed that a 3D printer has been able to reproduce a video that was popular in Japan more than 10 years ago by a person from overseas.
日本訳
10年以上前に日本で流行っていた、動画を海外の方が3Dプリンタで再現してきたたことに感謝と感動
this just in: printer beds have absolutely horrendous screen burn-in
This is going to blow up, and I'l all here for it.
Basically two dozen hours of work (or a bit more), well worth it! Well done.
Two dozen hours? Last I checked that was a solar day.
@@SupersuMC No way! I assumed y'all lived on Mars, but I guess you're on Earth
My bad!
4:08 GIANT BOLL
ball*
Sounds incredibly and somewhat nostalgic
I didn’t know other people still cared about this song or game. This made my day ❤😊
oh WOW this is a lot
first off, the 3d printer sounds are amazing. they're really really cool and i'd love to recreate it somehow even though i don't have a 3d printer lol. it sounds like it's struggling, and gives sounds so robotically alive, it's gorgeous.
secondly, at 1:50 and 3:30 the harmony is different than the original! the bass note is on the third so the chord is no longer the same, and it turned out pretty cool. i don't know how you turned the music into something the 3d printer understands, but either if you did the notes by hand or it was converted from the audio file, it's maybe because the lowest notes couldn't be played? or it picked up a harmonic of the bass or something? either way, it sounds cool reharmonized. and the second time even happens on the key change, so it blew me away even more
also, that's a lot of dedication for a youtube video lol. huge props
Yeah, the gcode file is generated using a midi to gcode converter. I usually go into the midi and clear out the lower notes because volume is correlated to pitch on the printer (and I can only play 2 notes at a time), so that's probably what you noticed.
@@JackLuckSack yeahh that's what happened then. for it to have the same harmonic context of the original, it should have been a Bb C and D on the bass (like the rest of the song, but held down), but this way turned out cooler in my opinion lol
that is MAD impressive. I didn't expect the printer to also sing
ok but how can a 3d printer play music better than me
I have no idea who started this trend, but I am very heppy that it's still going after all these years. Bad apple is such a good song
def one of my fav renditions, and the big ball of filament at the end too, mad respect!
so glad to see people are still maming bad apple...stuff. I hope it'll continue for as long as technology advances
so cool to see the video and hear the music - all from the printer!
This is SUCH a cool idea and what an amazing project to pull off!!!! WOAH!!!!
The amount of time putting in this video is amazing. Well done.
While everything about this is amazing, the mechanical key change was so good!
always wanted to see bad apple at 5 fps
I cant stop myself from seeing these videos. Its just a matter of not when but how.
Can’t wait to see this done on the bambu lab a1, since they advertise using the steppers to play music
2:18 Why does this actually sound like an electric guitar? And why does it sound good?
"What instrument do you play?"
"3D printer."
Cant believe 3d printer sounds so good
impressive patience, hats off to you
All of these leftover printed marks plus the noise makes me feel like I'm watching an old timey film.
Keeping the bad apple tradition, love it. ✌🏼
Imagine going to a party and this banger starts playing
I thought before watching that you had LOTS of bad apple statues in your house 😭😭
I always wanted to know what robot hell sounded like. I will never be able to hear again
すごすぎる!曲の再現もしてるけどめっちゃかっこいい
This is the kind of Machine-Made Art I can get behind.
The QR code is a rickroll
thank you
This is unironically almost more catchy than the original.
are your ears functioning?
That is so cool ❤❤❤ it’s crazy how the bass notes come out so well from a printer motor 😂 great video ❤❤❤❤❤❤
Ok, I know that this was done frame by frame, I get it.
But the FPS that the printer video is my brain every day.
Even the song damn 😮
The poor printer bro 😭😭🙏
Phenomenal job btw!!
Debatably more impressive than the animation is the song cover. Whaaaat the fuck!! It's so good
The orb containing every frame of bad apple at the end made it so much better
The 3D printer: BRO IM TIRED
Nice to see a bad apple video that is more than just camera trickery. Nice work.
Nobody do this on a resin printer please.
Challenge accepted lol.
That sounds fun 〜(꒪꒳꒪)〜
I scanned the qr code but 2 ads saved my life from bwing rickrolled for the 6875 time
1:04 this 8 bit like sound is still better than the popular one.
Bad Apple and Doom get ported to everything they can be.
the way that the music is made from motor noises is unbelievable
It’s so good even the creeper comes to have a look
This video is secretly a rickroll
I LOVE THIS! the cute 3d printer sounds. The animation.. ITS ALL AMAZING❤
You are one of those people i have no clue how you have the determination and time to do things like this. But I can't lie this is awesome
this looks incredibly painful. thank you for your sacrifice
The printing was probably pretty quick for each frame (depends on the printer, those things are *fast* these days) I wonder what it was like printing all those individual frames
Loved seeing your Printmatte degrade over time.
Great video!
This is has officially gotten out of hand.
Damn this is actually banger
Wow! This is amazing! Its even in 4k :)
Ok, you overplayed me with that QR.
Cool video though.
Thank you, YT recommendation!!!!
This is absolutely incredible, wow
This is one of my favorite applications of this meme I have seen, the fact that the music was also generated with the printer just adds so much
at the beginning it sounded like the printer was crying for help-
im glad you used minimal amount of filament, i know people say it would look better but it's good for the environment to not print things youre going to throw away
Kinda fun to see the wear and scratches build up over the give amount of time this project must have taken