@@maiba02 yeah, but the problem is that the only Noctua fans I could find are either 3 or 4 pin and the fans from the projector both only lead out with two red and black wires out of each into a preperared socket housing. The Noctua fans each individually come with 3 or 4 so that meands 6 or 8 total which makes no sense as there is no socket accomodate those :((
@@sixtheninth the noctua come with the “noctua omnijoin”. It is an adaptor which you can use to match the 3 cables from the fan to the two pair from the projector.
I'm thinking of swapping the two thick fans with something like Noctua. Any chance of what telling us what type of fans might those be? I didn't want to tear down the project, if i can't find a better replacement for the loudly fans. Much appreciated!
Cara preciso de ajuda o meu tá com a película polarizadora com mancha de queimado aí quando eu ligo aparece uma mancha pequena na tela onde acho essa do modelo do meu pra troca o meu é o wambo t2r Max essa do T2 Max funciona nele me ajuda aí ok ?
I succeeded in disassembling the projector with your video. thank you My projector is (WANBO T2 MAX). The power connection part came off. The female power connector was broken. I'm trying to attach the power supply wires directly to the board. Can you tell me where to put it? I can't upload a picture ㅠㅠ
Can someone tell me the fan size of those two small Noise fans, I can’t find anything about the size and specs of those and I somehow want to find replacements before taking it apart. 😅
Hello, I have the Mi Smart Compact/Youth projector and it’s bricked. It’s stuck on the mi logo on boot and doesn’t start up. I tried resetting through the Ok+Back button method but it doesn’t go into recovery. Can you please tell me if there is a way to reset the projector by unplugging something on the main board or some switch on the board? It’ll save my projector. Thank you :)
Do you know what is the input voltage range of this projector? I would like to use it as portable projector. I think it should work with 18V Dewalt batteries (working voltage 16-21V). I saw some car chargers, they looked like just a cable without any voltage regulation circuit, but the car battery have also a voltage between 10-14.4V. Wanbo customer service don't want to give me an answer about it, they recommend to use original power supply.
I don't think so the power hungry led lamp will eat all your battery, the screen eats 5v some mili APM rest all the voltage is going in the lamp see those heats the lamp gives out electricity in the form of heat waste
@@Nomad_Wanderer I think 2x 5ah battery should be enough for 2h movie. The question is, if the voltage is not to high when battery is full, or not to low when the battery is on the end
@@tomasotreasaigh111 not yet, I checked, that normally, the batteries are charged only to 20v, so there are chances, that it would work just like that, without any converter, but did not try yet
@@loop.hazard I got a brownish spot in the middle of the screen, someone is saying it is the LED screen damaged, you say the filter, can you elaborate?
Having trouble to open my yg500 projector. Cant find the screw. Dont know how to open it. Many dust inside the lens. Cant enjoy movies when seeing a dust
@@Nomad_Wanderer that was my thought also, cause I got a few China LED LCD projectors here at home. Maybe your know something about, but the screens in most of the projectors are 5 or 6 inch is this right? And then - maybe I found the right screen and put it in one correctly - is the internal hardware powerful enough to handle it? Including things like keystoning etc? Eventually do you know a site with a how to or something else? Greetings from Germany
I think that if the space where the LED is, you can mount another one with higher lumens and modify the power supply so that it can turn it on. it's just a matter of trying
I think yes that can be done but upgrading the led lamp will emit more heat plus it will eat more current for that you will need more cooling so if you can think of all these problems then yes you can upgrade, i think 500lumens increase is no issue for these heatsink tray replacing the led lamp with a more brighter one. 👍 Cheers
I have the exact same question, could you please tell me if you found out how to do this? If you reply and you were unsuccessful then I will endeavour to find a solution and make a video with relevant info if you still would like to do this. Peace from Ireland mo chara.
O meu aquece e não arma os fãs, porém liga normalmente o projetor. Depois da um erro de aquecimento e desliga. Alguém sabe me dizer se é só trocar os fãs?
If my t2free Is burn ( it have big blackpoint on screen when open ). I can buy led for t2 max to change led from t2 free to upgrade to 1200pixel ? (t2 free is 800pixel)
@@swegattyswooty9307 I have a pernament brownish spot in the center of the screen, I assume this is not possible to just wipe right? If so would you know where to buy a replacement Led screen compatible with this projector?
My projector has a dark burn spot and it is spreading until it totally covers the display so I cannot see the views showing. Your video blog helps me open my projector but my problem is where I can buy and replace glass with the cable connector on the polerizer film. My projector brand is yookie S10. Only 4 months old only and it is damaged. Does anyone know where I can buy parts?
🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
If someone is happily obeying Jesus' command and living in submission to the will of God then what is the need of bringing Islam into the equation? Islam and all religions are man's creations. All of these religions cause division and war. Let each man aspire to know God in his own way and may nobody stand in his way and claim their word is the final word.
Hello NDA HACK. I request permission to upload your video as a short video on my channel. Please give me permission. I will tag you in each of those videos and add your channel to the channels tab of my channel. Please give me permission.
Super useful video. Thanks so much. Helped me a lot in opening up my unit and cleaning a stray dust particle that got inside 👍⚒️
How to replace lens and where to buy lens?
you didn't show the bottom view. is the threaded tripod mount attached to a metal chassis or a plastic body?
the build quality is simply on another level compared to other cheap projectors
You are right ! It’s looks so good . Did you buy it ? . I think I’m gonna get one for movies and PlayStation 4 . What you think ?
Thank you for this video. It inspired me to upgrade the fans using Noctua and is so much quiet now!
Hello, what's the size of fans?
@@wk8465 40x10 mm
Thank You!
@@maiba02 yeah, but the problem is that the only Noctua fans I could find are either 3 or 4 pin and the fans from the projector both only lead out with two red and black wires out of each into a preperared socket housing. The Noctua fans each individually come with 3 or 4 so that meands 6 or 8 total which makes no sense as there is no socket accomodate those :((
@@sixtheninth the noctua come with the “noctua omnijoin”. It is an adaptor which you can use to match the 3 cables from the fan to the two pair from the projector.
I'm thinking of swapping the two thick fans with something like Noctua. Any chance of what telling us what type of fans might those be? I didn't want to tear down the project, if i can't find a better replacement for the loudly fans. Much appreciated!
those seem to be 40mm fans
Yeah!
This projector dust proofs or not?
Which is the aled recognised model ? I'm not able to find it by the code on it...
can you upgrade the RAM?
Which of those internal projector screens is the polarized filter?
I think the one in the center of those 2 separate glasses.
Mine is damaged and I need it replaced but I do not know where to buy it.
❤. This where the polarizer film. Bro ?
máy mình bị rơi thấy có vết nứt trên màn hình mà ko biết là nứt tấm gương hay là LCD nhỉ, liệu LCD có nứt được không
Wooww you are aousem sir thanks
Cara preciso de ajuda o meu tá com a película polarizadora com mancha de queimado aí quando eu ligo aparece uma mancha pequena na tela onde acho essa do modelo do meu pra troca o meu é o wambo t2r Max essa do T2 Max funciona nele me ajuda aí ok ?
Oi, vc co seguiu arrumar o seu?!! O meu por aqui também está aparecendo uma mancha preta quando eu ligo.
У меня такая же проблема( как ты с ней справился?
@@amandabarros1279 получилось исправить?
Hello po. Paano po yung zeemr d1 pro e dismantle?
I succeeded in disassembling the projector with your video.
thank you
My projector is (WANBO T2 MAX).
The power connection part came off.
The female power connector was broken.
I'm trying to attach the power supply wires directly to the board.
Can you tell me where to put it?
I can't upload a picture ㅠㅠ
Does anyone have info on the led used? Can't find any information and am considering replacing mine for something higher power
Hello, is the HDMI port soldered?
Does anyone know what the dimensions of the led?
Wanbo T2 Projector bagus gk boss. gambar nya jernih kah.?
Can someone tell me the fan size of those two small Noise fans, I can’t find anything about the size and specs of those and I somehow want to find replacements before taking it apart. 😅
What are those stuff?
Привет! Почему Т2r Max невозможно открыть?
Olá, meu LCD está com defeito, onde posso conseguir um novo?
Hello, I have the Mi Smart Compact/Youth projector and it’s bricked. It’s stuck on the mi logo on boot and doesn’t start up. I tried resetting through the Ok+Back button method but it doesn’t go into recovery. Can you please tell me if there is a way to reset the projector by unplugging something on the main board or some switch on the board? It’ll save my projector.
Thank you :)
Try re factory reset if that doesn't work then you need to re flash the boot img Android iso.
Where did you bouught this tool philips eletric ?
you can buy it on amazon
Thank you. My projector had fallen and the remote stopped working. Turns out it was the receiver had been disconnected.
Do you know what is the input voltage range of this projector? I would like to use it as portable projector. I think it should work with 18V Dewalt batteries (working voltage 16-21V). I saw some car chargers, they looked like just a cable without any voltage regulation circuit, but the car battery have also a voltage between 10-14.4V. Wanbo customer service don't want to give me an answer about it, they recommend to use original power supply.
I don't think so the power hungry led lamp will eat all your battery, the screen eats 5v some mili APM rest all the voltage is going in the lamp see those heats the lamp gives out electricity in the form of heat waste
@@Nomad_Wanderer I think 2x 5ah battery should be enough for 2h movie. The question is, if the voltage is not to high when battery is full, or not to low when the battery is on the end
Just take a USB Power Delivery 19V Adapter Cable and power it with >65W powerbank
Great idea, did you ever find a solution?
@@tomasotreasaigh111 not yet, I checked, that normally, the batteries are charged only to 20v, so there are chances, that it would work just like that, without any converter, but did not try yet
how many inches does the lcd screen have?
Your nail is quite the tool haha
wanbo screen burn .... spare parts?
The problem, is polarized filter
@@loop.hazard I got a brownish spot in the middle of the screen, someone is saying it is the LED screen damaged, you say the filter, can you elaborate?
@@sixtheninth Search on google parts of a proyector, prolly is just the filter, it usually burns faster than the lamp
Having trouble to open my yg500 projector. Cant find the screw. Dont know how to open it. Many dust inside the lens. Cant enjoy movies when seeing a dust
I wish that the chinese manufacturers put a 4k LCD screen the projectors in future. I would buy one immediately!!!
Just replace the internal 1080p screen with a Quad mobile screen i am sure it can do the job.
@@Nomad_Wanderer that was my thought also, cause I got a few China LED LCD projectors here at home. Maybe your know something about, but the screens in most of the projectors are 5 or 6 inch is this right?
And then - maybe I found the right screen and put it in one correctly - is the internal hardware powerful enough to handle it? Including things like keystoning etc?
Eventually do you know a site with a how to or something else?
Greetings from Germany
Please post how to open zeemr m1 pro
100th like ❤️
Hi, is it possible to upgrade the LED in this projector to a brighter one?
bhai projector hai Pokemon nahi jo viksit karonge
@The Royal Gamer why not? The cooling system seems quite capable.
I think that if the space where the LED is, you can mount another one with higher lumens and modify the power supply so that it can turn it on. it's just a matter of trying
I think yes that can be done but upgrading the led lamp will emit more heat plus it will eat more current for that you will need more cooling so if you can think of all these problems then yes you can upgrade, i think 500lumens increase is no issue for these heatsink tray replacing the led lamp with a more brighter one. 👍 Cheers
I have the exact same question, could you please tell me if you found out how to do this? If you reply and you were unsuccessful then I will endeavour to find a solution and make a video with relevant info if you still would like to do this. Peace from Ireland mo chara.
Hi, please kindly send me this projector led chip 500lumens
Goob 👍🏻
O meu aquece e não arma os fãs, porém liga normalmente o projetor. Depois da um erro de aquecimento e desliga.
Alguém sabe me dizer se é só trocar os fãs?
O meu está desse mesmo jeito! Liga normal mas os coolers não funcionam e desliga logo a seguir pois esquenta muito
My LCD is broken, does anyone knows exactly how to get a new part?
Também estou com essa dificuldade, meu LCD está com um risco vertical. Queria o código do LCD
@@marcusrodrigues001 Hi. Were you able to solve it?
If my t2free Is burn ( it have big blackpoint on screen when open ). I can buy led for t2 max to change led from t2 free to upgrade to 1200pixel ? (t2 free is 800pixel)
Burn point is due to led screen not led light ...
Youll have to get the led panel ....
If not DIY with a old mobile ..
@@swegattyswooty9307 I have a pernament brownish spot in the center of the screen, I assume this is not possible to just wipe right? If so would you know where to buy a replacement Led screen compatible with this projector?
@@sixtheninth nha you can't wipe it just get another screen from a Chinese website
Helpp my Wanbo is just projecting black screen nothing comes outtt
What happened to it ? Water maybe or something ?
Nice
is the RAM expandable?
Itena to kr do na sir
Nice 🙂
Sir ap merko ye samsang galaxy watch 4 giveaway kr do na plz
It's not like it used to be
My projector has a dark burn spot and it is spreading until it totally covers the display so I cannot see the views showing.
Your video blog helps me open my projector but my problem is where I can buy and replace glass with the cable connector on the polerizer film.
My projector brand is yookie S10. Only 4 months old only and it is damaged.
Does anyone know where I can buy parts?
Hi
⚠️ God has said in the Quran:
🔴 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )}
📖Quran
🔴 What Is Islam? ⚠️
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
If someone is happily obeying Jesus' command and living in submission to the will of God then what is the need of bringing Islam into the equation? Islam and all religions are man's creations. All of these religions cause division and war. Let each man aspire to know God in his own way and may nobody stand in his way and claim their word is the final word.
👍🏿👍🏿🤩🤩🤩😍😍😍🥰🥰🥰🥰😘😘😘
Sir jewab jerur Dena ap to you tuber ho to kr do na sir merko giveaway mere ps itene pese nhi hai me LA seku
toh bhai Ferrari maang le
Even the T2 have a heatsink on the CPU and the T6 don't, causing random crashes and losing BT/WIFI connection. Very embarrassing for the brand
Where is CCP spyware?
Piece of crap. 2 fans were okay, but blower fan was done. Stopped working after less than 1 year, do not recommend this !
menuda basur.. mejor un proyector de tecnologia DLP
Hello NDA HACK. I request permission to upload your video as a short video on my channel. Please give me permission. I will tag you in each of those videos and add your channel to the channels tab of my channel. Please give me permission.