Intake Manifold Cleaning and Reinstallation Part 2 - Hyundai Accent

Поділитися
Вставка
  • Опубліковано 10 гру 2021
  • This is the second part of the video.
    The removal of the intake manifold of this Hyundai Accent is a difficult job. It requires a specific tool to get the job done. Take note that 3/8's socket sets are useful in this job.
    - hyundai
    - diy
    - intake manifold
    Video Links:
    Intake manifold removal, cleaning, and reinstallation:
    Part 1:
    • Intake Manifold Remova...
    EGR assembly removal, cleaning, and reinstallation:
    Part 1:
    • EGR Assembly Removal P...
    Part 2:
    • EGR Assembly Cleaning ...
    "PLAYLIST" Hyundai Accent EGR and Intake System Comprehensive Maintenance:
    • Hyundai Accent EGR and...
    Car used for demonstration: 2017 Hyundai Accent Hatchback CRDi
    Applicable for the following models:
    Hyundai:
    - Verna
    - Solaris (Russia)
    - i25 Accent (Colombia, Israel)
    - Grand Avega (Hatchback, Indonesia)
    - Excel III (Sedan, Indonesia)
    - Grand Pony (Sedan, Colombia)
    Dodge Attitude (Mexico)
    BGM:
    UA-cam Audio Library
    Nite Foul - Noir Et Blanc Vie
    Thank you very much and God Bless.
    #andredraftproject #hyundai #accent #crdi #intake #manifold #cleaning #reinstallation
  • Авто та транспорт

КОМЕНТАРІ • 28

  • @a.s.m.r3418
    @a.s.m.r3418 Рік тому

    Nice work

  • @julianolivaresnegri9565
    @julianolivaresnegri9565 2 роки тому +2

    Muchas gracias amigo desde chile
    Logre hacer este manteniendo siguiendo tus videos esta muy bien explicado paso a paso muchas gracias!

    • @DraftProject
      @DraftProject  2 роки тому

      Me alegro de escuchar amigo! Muchas gracias y cuídense.

    • @nathanosman5606
      @nathanosman5606 3 місяці тому +1

      Hola amigo! Como te va? Quería saber que tal te corre el carro después del servicio. Si viste diferencia?

    • @julianolivaresnegri9565
      @julianolivaresnegri9565 3 місяці тому +1

      @@nathanosman5606 cambia bastante en potencia y economia . Lo estoy haciendo cada 6 meses aprox.
      Te recomiendo hacerlo notaras los cambios y alargar la vida de tu maquinon !

  • @toperdmechanic6715
    @toperdmechanic6715 Рік тому

    Master thank you

  • @jakobdjas2209
    @jakobdjas2209 2 роки тому

    Super Video danke

    • @DraftProject
      @DraftProject  2 роки тому

      Thank you very much too!
      Bitte. Vielen Dank auch!

  • @naldstvosaile4454
    @naldstvosaile4454 7 місяців тому

    Nice one

  • @trushartrushar6232
    @trushartrushar6232 5 місяців тому

    ❤👍

  • @SierraForeTweny
    @SierraForeTweny 2 роки тому

    Is it safe to use carb cleaner on the intake manifold

    • @DraftProject
      @DraftProject  2 роки тому +2

      Yes. I use it on tough carbon stains.

  • @stevencaindec4623
    @stevencaindec4623 2 роки тому

    After watching all of those videos, I can say that disassembling the intake manifold and egr is quite difficult.
    Question:
    Can you remove the manifold without using a size 12 deep/narrow socket? I only have the regular sockets with extensions.

    • @DraftProject
      @DraftProject  2 роки тому +1

      Thank you very much for watching my videos! Yeah, it is a difficult job.
      I've already tried two different brands of sockets. Both are short and 12mm and none of them worked. By the way, I am using a 1/2 drive.
      Since I was using a 1/2 drive, I used a long/deep 12mm socket to solve that problem. The part of the body of the socket where the extension attaches is too large for it to pass through.
      I haven't tried this but I guess if I was using a 3/8 drives, it might have worked since it has a smaller extensions and socket dimensions which pass through in between the intake manifold and bolt.

    • @robl5833
      @robl5833 11 місяців тому +1

      It was a nightmare. Hyundai i30 very similar so used this video. Nothing on this car is easy everything is in the way. Had to take so many parts off even including the thermostat flange.
      I used ¼ inch drive extension and sockets for the manifold and a few other bits, just no room. At least with the i30 I didn't have to remove the bumper.🙄

  • @user-yt7go3ki9h
    @user-yt7go3ki9h 10 місяців тому

    intake manifold to cylinder head torques for bolts and nuts should be between 19.6 - 23.5N.m

  • @MsDonGoofy
    @MsDonGoofy 10 місяців тому

    Can you please answer me , where is PCV valve on this engine?

    • @Damian-ik1jt
      @Damian-ik1jt 9 місяців тому

      There is not pcv valve the valve cover have build in oil retainer which stops oil going through to the intake which is a bad design and oil still passes through

    • @MsDonGoofy
      @MsDonGoofy 9 місяців тому

      @@Damian-ik1jt thank you

  • @eduardodaquiljr9637
    @eduardodaquiljr9637 5 місяців тому

    Me install oil catch can so no oil entering intake manifold.Manifold always clean,no cleaning.

  • @mamakath2183
    @mamakath2183 Рік тому

    Bat d mo tanggalin yang mga flap e natatangal yan..para d ka mahirapan maglinis

  • @SpunckyJew6969
    @SpunckyJew6969 3 місяці тому

    can i pay you to do this to my car