Yay!!! It worked. It took me a few more tries on my machine, that has been in storage for about 20 yrs. I almost gave up hope….then it finally loosened and it is great. Thanks so much!!!!
Thank you for this fabulous video. I recently bought my second Elna 62C -- super clean inside and beautiful stitching, but the needle position wheel was stuck fast. I have been heating with a hairdryer and oiling for about 30 minutes a day for 8 days now. Happy to report that very slowly, but very surely, it is loosening up. I now have it rotating the full amount in both directions. Still a wee bit too stiff to move without a cloth when cold. Nice and free when hot. I ended up using a small piece of fabric, soaked in penetrating oil, and packed up under the plastic wheel, and into the cavity where the shaft ends. I think it's helping to get the oil into the right places. All this to say: be patient and persistent. It might take a sustained effort, but it will come right eventually.
Many, many thanks. I love my Elna SU - it was my mother's and was the machine I learned on. I don't want any other machine. I went to put buttonholes on the corners of a duvet today, and the disc was completely seized up. Can't believe I found a tutorial to fix my exact problem! Thanks again- will be looking for more Elna wisdom in your catalog!
Unbelievable! Thank you so so much for this video. I recently inherited my mothers old Elna supermatic which I learnt to sew on. It had not been used for twenty five years and I always loved it. I had it serviced ($250) and they told me the needle position wheel could not be repaired. I thought I'd give it a go myself after watching your video (oh how I wish you were in Australia) and low and behold I have it moving again. I used a little WD40 and a hair dryer very carefully. You are a very good teacher and the video is excellent!
fantastic video, I had my machine serviced by a professional and they said it was locked up and there was nothing to do about it. I did it with a hair dryer and it worked perfectly! Thank you for making this video for those of us who love our old sewing machines!
Thanks for the video. I've wondered for years how to get the wheel to move more freely.
3 роки тому+2
Had the exact same problem two years ago with my second hand Elna Zig-Zag, hair dryer from the outside and some wiggle did fix it! Has been running like a champ since then. After acquiring it and realizing how good it is, I bough another one for my mum!
Excellent video! I wish the repair shop had seen a video like this before I dropped off my machine with a stuck wheel last January. The shop ended up melting the wheel and locking up a bunch of other parts inside. But, thanks to your amazing videos and a new wheel from White Sewing Center in Missouri, I was able to fix it myself and get everything working beautifully again.
So helpful! This solved the firmly stuck dial on my new (old) 64C. Every time it cooled it was stuck fast again. It took a lot of repetition, 30 seconds of hairdryer each time. Very satisfying once it starts turning smoothly! I didn’t even know until then that there’s a light “click” stop to mark centre. I used triflow and recommend that for those like me who couldn’t find the kind you mentioned. Thanks again, I love your videos.
I have a S/H Elna SP (New Aspect) and the needle position control is stuck. I didn't realise that this was a common problem. I used the later Elna Carina (=Air Electronic SU), a wonderful machine, for decades without realising that it also had adjustable needle position!
Thank you for the great video. I was able to unfreeze my positioning wheel on a 62C. I was using a hair dryer. I had to get it pretty hot to get results, but I was cautious about not melting anything.
Mine is working now thanks to you. Is there a way to re calibrate how far the needle goes when the wheel is set to the far left position?(or centered come to think of it) it's a smidge off now.
Quisiera saber dónde se puede comprar las piezas de respuesto,incluyendo las poleas de la máquina ELNA SU en toda América,especialmente México y Florida,Maiami.Muchas Gracias.
Thank so much for your thorough videos on the Elna SU! I found one at an estate sale about 3 years ago. It was in pretty good order and after having a service it runs like a champ. I’m new to sewing and having your videos on the SU to refer back to (many times) has helped me immensely! I also just watched your button video which has given me some confidence to give it a try. I recently purchased a Pfaff 78 from an estate sale. Do you have any plans on making a video for a Pfaff models? Thank you again for your lovely videos!
I found this link while searching for a replacement wheel. If I had found this 15 minutes before I broke would have been great! So, I'm in search of a replacement wheel. Got any ideas? Thanks
I have 2 Questions please if you will? Can I use kerosene (The grasshopper uses it in the bobbin race)Would that thin up gunked oil? Or put the machine in a black trash bag & leave it in the sun for a while to loosen the gunk? Love pussers & woofers. Thank You
Hello I bought an Elna 64 flat bed. I cleaned, oiled and greased it. When I push the pedal the motor sound but the belt it not engaged. Do you know what is wrong.TIA.
As your machine has no motor belt. Your motor pulley is damage or slipping. This part can be expensive or not available.Check out my Elna motor pulley repair at ua-cam.com/video/mpNmeSZ6_HE/v-deo.html
@@stevebachnick Thanks. I have the pulley parts in stock generally and they are relatively inexpensive. Contact me via email, my web address is in the description.
Yay!!! It worked. It took me a few more tries on my machine, that has been in storage for about 20 yrs. I almost gave up hope….then it finally loosened and it is great. Thanks so much!!!!
Thank you for this fabulous video. I recently bought my second Elna 62C -- super clean inside and beautiful stitching, but the needle position wheel was stuck fast. I have been heating with a hairdryer and oiling for about 30 minutes a day for 8 days now. Happy to report that very slowly, but very surely, it is loosening up. I now have it rotating the full amount in both directions. Still a wee bit too stiff to move without a cloth when cold. Nice and free when hot. I ended up using a small piece of fabric, soaked in penetrating oil, and packed up under the plastic wheel, and into the cavity where the shaft ends. I think it's helping to get the oil into the right places. All this to say: be patient and persistent. It might take a sustained effort, but it will come right eventually.
Many, many thanks. I love my Elna SU - it was my mother's and was the machine I learned on. I don't want any other machine. I went to put buttonholes on the corners of a duvet today, and the disc was completely seized up. Can't believe I found a tutorial to fix my exact problem! Thanks again- will be looking for more Elna wisdom in your catalog!
Unbelievable! Thank you so so much for this video. I recently inherited my mothers old Elna supermatic which I learnt to sew on. It had not been used for twenty five years and I always loved it. I had it serviced ($250) and they told me the needle position wheel could not be repaired. I thought I'd give it a go myself after watching your video (oh how I wish you were in Australia) and low and behold I have it moving again. I used a little WD40 and a hair dryer very carefully. You are a very good teacher and the video is excellent!
fantastic video, I had my machine serviced by a professional and they said it was locked up and there was nothing to do about it. I did it with a hair dryer and it worked perfectly! Thank you for making this video for those of us who love our old sewing machines!
Thank you so much . I have fixed my new Elna . It took me 2 hours and I did get the blisters, but the needle is free.
Thanks for the video. I've wondered for years how to get the wheel to move more freely.
Had the exact same problem two years ago with my second hand Elna Zig-Zag, hair dryer from the outside and some wiggle did fix it! Has been running like a champ since then. After acquiring it and realizing how good it is, I bough another one for my mum!
It's good you didn't have one that was too bad. They certainly are great machines.
Excellent video! I wish the repair shop had seen a video like this before I dropped off my machine with a stuck wheel last January. The shop ended up melting the wheel and locking up a bunch of other parts inside. But, thanks to your amazing videos and a new wheel from White Sewing Center in Missouri, I was able to fix it myself and get everything working beautifully again.
Great to hear you got it sorted. thanks.
So helpful! This solved the firmly stuck dial on my new (old) 64C. Every time it cooled it was stuck fast again. It took a lot of repetition, 30 seconds of hairdryer each time. Very satisfying once it starts turning smoothly! I didn’t even know until then that there’s a light “click” stop to mark centre. I used triflow and recommend that for those like me who couldn’t find the kind you mentioned. Thanks again, I love your videos.
Great to hear you managed to free it up. Thanks.
Excellent demonstration. I have an SU. It’s brilliant. Perfect stitches and quiet.
Pats for your fur baby too.
Thank you so much! One of the smoothest sewing machines ever made. I use one when I make shirts. Amazing buttonholes too.
I have a S/H Elna SP (New Aspect) and the needle position control is stuck. I didn't realise that this was a common problem. I used the later Elna Carina (=Air Electronic SU), a wonderful machine, for decades without realising that it also had adjustable needle position!
Thanks for sharing!
Thank you for the great video. I was able to unfreeze my positioning wheel on a 62C. I was using a hair dryer. I had to get it pretty hot to get results, but I was cautious about not melting anything.
Nice one. Thanks.
So thankful for this video! You solved my problem with my SU all the way over in Canada!
Thanks and glad I could help, from a fellow Commonwealther.
Mine is working now thanks to you. Is there a way to re calibrate how far the needle goes when the wheel is set to the far left position?(or centered come to think of it) it's a smidge off now.
Hi, yes it's in the service manual which you should be able to find online. Thanks.
Thank you. I managed to free my Star SU.
Quisiera saber dónde se puede comprar las piezas de respuesto,incluyendo las poleas de la máquina ELNA SU en toda América,especialmente México y Florida,Maiami.Muchas Gracias.
Thank so much for your thorough videos on the Elna SU! I found one at an estate sale about 3 years ago. It was in pretty good order and after having a service it runs like a champ. I’m new to sewing and having your videos on the SU to refer back to (many times) has helped me immensely! I also just watched your button video which has given me some confidence to give it a try. I recently purchased a Pfaff 78 from an estate sale. Do you have any plans on making a video for a Pfaff models? Thank you again for your lovely videos!
I do have some Pfaff machines so maybe one day I'll do some videos based on them. Thanks.
I found this link while searching for a replacement wheel. If I had found this 15 minutes before I broke would have been great! So, I'm in search of a replacement wheel. Got any ideas? Thanks
Thank you so much. This was exactly what I needed.
Great to hear it was helpful. Thanks.
My Elna 62SU has a different needle positioning problem. Turning the wheel no longer has any effect on the needle position. Can that be fixed somehow?
If your dial wheel is not stuck yet, take a spray can of penetrating oil, direct the red straw under the wheel and give it a shot of spray..
Thank you! 🎉
I have 2 Questions please if you will?
Can I use kerosene (The grasshopper uses it in the bobbin race)Would that thin up gunked oil?
Or put the machine in a black trash bag & leave it in the sun for a while to loosen the gunk?
Love pussers & woofers. Thank You
Maybe kerosene would work but not sure. You'd want to be sure it does not affect plastics in any way. Warming the machine up certainly helps. Thanks.
Hello
I bought an Elna 64 flat bed. I cleaned, oiled and greased it. When I push the pedal the motor sound but the belt it not engaged. Do you know what is wrong.TIA.
There's an idler pulley that needs replacing.
As your machine has no motor belt. Your motor pulley is damage or slipping. This part can be expensive or not available.Check out my Elna motor pulley repair at ua-cam.com/video/mpNmeSZ6_HE/v-deo.html
@@stevebachnick Thanks. I have the pulley parts in stock generally and they are relatively inexpensive. Contact me via email, my web address is in the description.
Thank you *very* much, kisses to Molly 😘
Molly accepts kisses, but only on her terms :) - Thanks.
Спасибо большое за видео За субтитры на русском языке 👍👍👍