I have a 2023 RTV X1100C. On a steep hill, I have seen 31. Mine has almost 400 miles on it and about 62 hours. Probably need to adjust the cables some.
Yes, foot screw all the way turned to the floor, all linkage tightend up and the throttle pin backed out for full range of the stock machine. I haven't adjusted the hydraulic pressure or the engine fuel in this one yet.
And I subscribed!! I bought one at auction. With no engine or HST. So have a good body with no guts. If you want to rebuild mine to make a video. Will pay for parts and labor too!!
It's a little bit of both. Some extra rpm on the engine and adjusting all of the linkage. I have more videos of the whole process! Thanks for watching 👀
You don't need to turn up the fuel to accomplish it. If you go through each step your machine will get going. I will be making some more videos with more specific things.
I've been watching the series, some videos repeatedly. I've unlocked 5-7mph with only the pedal stop! Thanks. Looking forward to more!
Glad you like them! Thanks for watching and commenting.
I know this video is long and boring, hey it's the first one.
More to come!
I’m subscribing
Thank you
I have a 2023 RTV X1100C. On a steep hill, I have seen 31. Mine has almost 400 miles on it and about 62 hours. Probably need to adjust the cables some.
That's pretty good speed! Yes, there are probably some cables that will need adjustments.
I have an x1140, and after adjustment, can’t get more than 25mph. Any more ideas?
Did you watch the engine bay video? Try backing out your governor screw to give you more throttle.
While you were going around 30 mph or more did you have pedal floored?
Yes, foot screw all the way turned to the floor, all linkage tightend up and the throttle pin backed out for full range of the stock machine. I haven't adjusted the hydraulic pressure or the engine fuel in this one yet.
@@SearlesStation Did your hand throttle give you the fastest top end? Or was the foot pedal only used on the road with this video?
The hand throttle ads 2-3 mph the way I have it set. The foot pedal only allows a max rpm and hst output. The hand throttle pushes it more.
And I subscribed!!
I bought one at auction. With no engine or HST. So have a good body with no guts.
If you want to rebuild mine to make a video. Will pay for parts and labor too!!
I would love to!
How did you get 32 mph on the road did you adjust the tranmission or did you turn up the fuel?
It's a little bit of both. Some extra rpm on the engine and adjusting all of the linkage. I have more videos of the whole process!
Thanks for watching 👀
Is sound like rtv x900
A lot of the parts are the same. I wonder how much of the stuff is actually different
Never seen how you got the 36 mph. Watched all 4 videos but you never showed how to turn up the fuel!
You don't need to turn up the fuel to accomplish it. If you go through each step your machine will get going.
I will be making some more videos with more specific things.
Downhill!
Yep! It's 36-37 max going down the steepest hill! I can do more but I'm not ready to push the package. Looking for a used one to really open up.
Down hill
Yep!