The washer pushes onto the end of the quarter turn stud once the stud is in place through the hole in whatever you are installing it in - that's what you use the two sockets for - one to push on the outside end of the stud, and one that slips over the stud and pushes the washer into place.
this is how all tutorials should be. all info needed condensed into 51 seconds.
Thank you!
I have a camloc that I’m trying to replace. It comes with the quarter turn stud and one washer. I couldn’t see from video how to install?
The washer pushes onto the end of the quarter turn stud once the stud is in place through the hole in whatever you are installing it in - that's what you use the two sockets for - one to push on the outside end of the stud, and one that slips over the stud and pushes the washer into place.
You may find this helpful: ua-cam.com/video/AZ9vLFp4HcQ/v-deo.htmlsi=19F0GuhXPEDBeqVC
Have you ever removed a camloc? Any hints?
I have removed them, but have no real hints about how to do it easily.
Pry the retaining ring off with a little screwdriver.