😁 Hi James. I think the only difference is the 590 can deliver slightly more paint per hour and I think it also has a bit more motor speed control. But the 575 is more than enough for me (I'll probably only use it a couple of times a year). But I am really impressed with it so far 😁. Thanks for watching James 😁👍
I usually paint my fence by hand. This year I will be using my hvlp paint sprayer that tilswall sent me to review. I did try it on one panel & can say I will never use a brush again. So much quicker
😁 It is so so much quicker (apart from the extra time it takes to make the video 🤣😂). I will be using it again soon to paint my shed... all I need to do is build it first 🤣. I guess a brush is better for hard to reach places but I'm now a big fan of spraying 😁. Thanks for watching Dave 😁👍
😁 Wagner do a few different types of sprayer. I think they are all based on the same design so I imagine that even the cheaper options are still great. After the initial time taken to mask up, the actual spray time is just so so quick. And cleanup is really easy. I should have got one ages ago. Thanks for watching Ben 😁👍
brilliant video - the manufacturers should be paying the likes of you to do this stuff because they are not very good at it themselves, there should be a QR code on the side of the box straight to this video
@SeosamhMacUaid 😃 Thanks for your kind words 😊. But I'm afraid I don't get a single penny from them. But it's a nice bit of free advertising for them. It's a great product so I don't mind doing it. But it means I also had to buy the sprayer in the first place and take the chance it was OK.. lucky for me, I love it 😆. Thanks for watching 😁 👍
😁 Hi Danielle, I personally haven't used primer in it yet. But I can see no reason why you couldn't use it. As long as you get the viscosity of the primer right I imagine it would spray quite well. I will try it, but probably not until the summer. I have some water based MDF primer I will use. Thanks for watching Danielle 😁👍
@@daniellebishop5673 Hi Danielle. I have only ever used water based paints, so cleaning with soapy water works well. I would be very cautious using any solvent based paints that would need thinners etc for cleaning. I think Wagner only reccomend using cleaning materials with a relatively high flash point (above 38 degrees C i think). So personally I would use my other spray guns and compressor for that type of spraying. Probably worth a visit to the Wagner website to get some more detailed info rather than risking braking the sprayer. I hope that helps 😁👍
😁 Thanks Rob. I think you should invest. Looks like Wagner do a range, so there should be one that suits your needs. Its better than I expected 😁. Thanks for watching mate 😁👍
Thanks Frank, nice video, covers all the bits you need to know with no fuss. Just bought the W690 Flexio which has a corded motor and a long pipe for the air.
How great you covered everything so well I was completely depressed to see so much reading and checking a few you tube videos never got into real detail. Yours is miles better thank you so much
😃 Thank you very much Phil for your appreciation. I hope you found the video helpful. I'm still loving this sprayer, it makes light work of some of those pain in the butt jobs. Thanks for taking the time to comment and thanks for watching 😁 👍
What a very honest video. I am going to buy one, as we have some furniture to spray. This is the sort of video that really helps me to see what a tool can do. Thank you. It will be perfect for my projects. 😊 😊
😁 Thank you KS. You won't be dissapounted. Its a great tool. With only a little bit of practice you can get some great results, and its a massive time saver for bigger projects. Thanks for watching 😁 👍
😁 Hi Tony, Thanks. And i think i only had it on low power. it states that it is "German engineering" and looks like it is made in a place called "Markdorf" in Germany...... its quite German so it should last forever 😁. Thanks for watching 😁👍
I don’t know how you did this. I bought this brand new today and it hardly sprayed any paint at all. We have a water based paint and diluted by 10% and still no luck.
🤔 Thats not good... I guess you have checked the nozzle for any restrictions 🤔. So I would probably return it immediately and get a replacment. Even straight out of the box it should spray really well. Please keep us posted if you have any luck. Thanks for watching Anastasia 😁👍
Thanks for the review. I’ve got 19 6x6 fence Panels, two sheds a gate and various planters to paint. I need to get on with it, but just can’t face it. I’m really tempted to invest in one of these. 👍🏼
😁 You need to get one. By the time you have done all of that lot you would have spent more on brushes than the price of a sprayer 🤣😂. It is so so much quicker. Thanks for watching Steve 😁👍
😁 Thanks Nigel. To be honest, I haven't done any decorating in the house for quite a while now. So I haven't had the opertunity. I'm sure I will at some point soon so I'll make sure I do a follow up video 😁. Thanks for watching Nigel 😁👍
😁 Hi chicken, its surprising how little overspray there is when applying the fence paint. So I didn't end up with too much mess. When I used it to spray the shed in one of my other videos you can see how controllable it is. So no mess no fuss 😁. Thanks for watching 😁 👍
that is wonderful to hear - I am going to buy the 575 tomorrow morning when it comes on sale at my local store and am terrified of the thought of fogging out my entire property with black fence stain! @@frankslittleworkshop
@@chickenflockers4796 😁 You will be fine. Slow and steady to start and have a quick practice first, then you will soon realise there was nothing to worry about 😁. Good luck mate. Let us know how you get on 😁👍
😁Hi Phil. I haven't used it for masonry paint so can't say from experience. What I would recommend would be to pop over to Leo's UA-cam channel "hand-i-craft" he goes in to more detail on what can be used with this type of sprayer. Hope that helps. Thanks Phil 😁👍
😁 Your welcome Olabisi. It is easy to setup and use and such a great tool. Just remember to spend the time to clean it out as soon as you have finished. That way it will be ready to go the next time you use it 😁. Thanks for watching 😁👍
😁 Hi Paul. It is very unlikely that the retail shop you got it from will carry spares. So I assume you will need to contact Wagner directly. There should be at least an address in the manual that came with the spraygun. Give that a try. Thanks for watching Paul 😁👍
I like this video very much. Thanks Frank!
😁 Thanks Nandor. And thanks for watching 😁 👍
I've got the 590 and am struggling to see many differences between them. Very handy for these rough surface projects.
😁 Hi James. I think the only difference is the 590 can deliver slightly more paint per hour and I think it also has a bit more motor speed control. But the 575 is more than enough for me (I'll probably only use it a couple of times a year). But I am really impressed with it so far 😁. Thanks for watching James 😁👍
Enjoyed the vid Frank very informative
😁 Thanks Phil. Hope it was of some use 😁👍
I usually paint my fence by hand. This year I will be using my hvlp paint sprayer that tilswall sent me to review. I did try it on one panel & can say I will never use a brush again. So much quicker
😁 It is so so much quicker (apart from the extra time it takes to make the video 🤣😂). I will be using it again soon to paint my shed... all I need to do is build it first 🤣. I guess a brush is better for hard to reach places but I'm now a big fan of spraying 😁. Thanks for watching Dave 😁👍
Great video Frank. I have a long fence to spray and have a hand pumped bottle sprayer but this has made me think twice. Cheers!
😁 Wagner do a few different types of sprayer. I think they are all based on the same design so I imagine that even the cheaper options are still great. After the initial time taken to mask up, the actual spray time is just so so quick. And cleanup is really easy. I should have got one ages ago. Thanks for watching Ben 😁👍
Thank you
❤️❤️🙏🙏👍
😀👍
What is a fence paint? A water based paint?
😁hi Ziyad, yes, the fence paint i have used is a water based paint. So if needed it can be thinned with water. Hope that helps. Thanks for watching 😁👍
brilliant video - the manufacturers should be paying the likes of you to do this stuff because they are not very good at it themselves, there should be a QR code on the side of the box straight to this video
@SeosamhMacUaid 😃 Thanks for your kind words 😊. But I'm afraid I don't get a single penny from them. But it's a nice bit of free advertising for them. It's a great product so I don't mind doing it. But it means I also had to buy the sprayer in the first place and take the chance it was OK.. lucky for me, I love it 😆. Thanks for watching 😁 👍
I was wondering if a primer can be used in it
😁 Hi Danielle, I personally haven't used primer in it yet. But I can see no reason why you couldn't use it. As long as you get the viscosity of the primer right I imagine it would spray quite well. I will try it, but probably not until the summer. I have some water based MDF primer I will use. Thanks for watching Danielle 😁👍
Thank you so very much for messaging back.fi you know if it's safe to use thinners to clean out the gun as you use water in your video
@@daniellebishop5673 Hi Danielle. I have only ever used water based paints, so cleaning with soapy water works well. I would be very cautious using any solvent based paints that would need thinners etc for cleaning. I think Wagner only reccomend using cleaning materials with a relatively high flash point (above 38 degrees C i think). So personally I would use my other spray guns and compressor for that type of spraying. Probably worth a visit to the Wagner website to get some more detailed info rather than risking braking the sprayer. I hope that helps 😁👍
Thank you for your information we will look in to it and will message back thank you so much.
Great review and demo Frank, I’ve seen these advertised.. I may now take the plunge😁👍 , cheers Rob
😁 Thanks Rob. I think you should invest. Looks like Wagner do a range, so there should be one that suits your needs. Its better than I expected 😁. Thanks for watching mate 😁👍
@@frankslittleworkshop 👌👌👍
Thanks Frank, nice video, covers all the bits you need to know with no fuss. Just bought the W690 Flexio which has a corded motor and a long pipe for the air.
😁 Thanks Nalski. I'm still loving this. It makes my life so much easier and still works perfectly 😁. Thanks for watching 😁 👍
Hi I have a question but will you message back on this video????
Fantastic video. I have had a flexio 580 for a while and have not used, fence panels tomorrow. Many thanks.
😁 Thanks Cerca. I hope the video was of some help. Thanks for watching 😁 👍
How great you covered everything so well I was completely depressed to see so much reading and checking a few you tube videos never got into real detail. Yours is miles better thank you so much
😃 Thank you very much Phil for your appreciation. I hope you found the video helpful. I'm still loving this sprayer, it makes light work of some of those pain in the butt jobs. Thanks for taking the time to comment and thanks for watching 😁 👍
What a very honest video. I am going to buy one, as we have some furniture to spray. This is the sort of video that really helps me to see what a tool can do.
Thank you. It will be perfect for my projects. 😊 😊
😁 Thank you KS. You won't be dissapounted. Its a great tool. With only a little bit of practice you can get some great results, and its a massive time saver for bigger projects. Thanks for watching 😁 👍
Sister wants one for furniture restoration, so many types and brands unsure what to get
Good demonstration Frank it sprayed that thick fence preservative well. Is it made in Germany? Tony
😁 Hi Tony, Thanks. And i think i only had it on low power. it states that it is "German engineering" and looks like it is made in a place called "Markdorf" in Germany...... its quite German so it should last forever 😁. Thanks for watching 😁👍
I don’t know how you did this. I bought this brand new today and it hardly sprayed any paint at all. We have a water based paint and diluted by 10% and still no luck.
🤔 Thats not good... I guess you have checked the nozzle for any restrictions 🤔. So I would probably return it immediately and get a replacment. Even straight out of the box it should spray really well. Please keep us posted if you have any luck. Thanks for watching Anastasia 😁👍
Thanks so much was more informative than other videos. I'm going to use it to emulsion today. Fingers crossed 🤞
😁 Thanks Rosemary 😁. Good luck, I'm sure you will get great results 😁. Thanks for watching 😁👍
Thanks for the review. I’ve got 19 6x6 fence Panels, two sheds a gate and various planters to paint. I need to get on with it, but just can’t face it. I’m really tempted to invest in one of these. 👍🏼
😁 You need to get one. By the time you have done all of that lot you would have spent more on brushes than the price of a sprayer 🤣😂. It is so so much quicker. Thanks for watching Steve 😁👍
I like your thinking 🤣👍🏼
One of the best reviews ive seen. Wish you did the wall sprayer as a part 2 to this.
😁 Thanks Nigel. To be honest, I haven't done any decorating in the house for quite a while now. So I haven't had the opertunity. I'm sure I will at some point soon so I'll make sure I do a follow up video 😁. Thanks for watching Nigel 😁👍
did the test spray right at the work bench, on the clamps, the top shelves, the stanley drill etc....
😁 Hi chicken, its surprising how little overspray there is when applying the fence paint. So I didn't end up with too much mess. When I used it to spray the shed in one of my other videos you can see how controllable it is. So no mess no fuss 😁. Thanks for watching 😁 👍
that is wonderful to hear - I am going to buy the 575 tomorrow morning when it comes on sale at my local store and am terrified of the thought of fogging out my entire property with black fence stain! @@frankslittleworkshop
@@chickenflockers4796 😁 You will be fine. Slow and steady to start and have a quick practice first, then you will soon realise there was nothing to worry about 😁. Good luck mate. Let us know how you get on 😁👍
Hi, great video. Can this be used for a brick wall with masonry paint?
😁Hi Phil. I haven't used it for masonry paint so can't say from experience. What I would recommend would be to pop over to Leo's UA-cam channel "hand-i-craft" he goes in to more detail on what can be used with this type of sprayer. Hope that helps. Thanks Phil 😁👍
@@frankslittleworkshop that’s brilliant, thanks for the advice. 👍🏼
Thanks for making it easy for me to understand the setting up.
😁 Your welcome Olabisi. It is easy to setup and use and such a great tool. Just remember to spend the time to clean it out as soon as you have finished. That way it will be ready to go the next time you use it 😁. Thanks for watching 😁👍
ive lost the blue umbrella valve in the air tube where can i get another
😁 Hi Paul. It is very unlikely that the retail shop you got it from will carry spares. So I assume you will need to contact Wagner directly. There should be at least an address in the manual that came with the spraygun. Give that a try. Thanks for watching Paul 😁👍
@@frankslittleworkshop thanks for the reply will have a look at wagners site