Zcon Twin FPV Wing - High Speed Low Flying 🧨 Inc. DJI Goggle 2 DVR 🤓
Вставка
- Опубліковано 22 лип 2023
- 🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
This was my first time using my new DJI Goggles 2 and one if the first opportunities ive had to really let rip with the Zcon Twin on some low and fast flying… weather has been shocking here for a while now, even this flight narrowly avoided the rain which you might spot in the distance on this video. The image in the Goggle 2 with the O3 really is stunning! If only there was less complication and confusion around the DJI gear as it really has by far the best image quality.
Being critical of my own flying, I definitely could have gotten lower in places but its been a while since I’ve flown and this was the first time with the new goggles (with lower gain antennas than i'm used to). Hopefully still an enjoyable watch.
☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► tiny.cc/BuyAdamGaCoffee
🔵 Follow me on my Facebook page for updates, build logs, random pictures & vid clips that don't make it to UA-cam: / adamgdoesfpv
📷 Follow me on Instagram @adamgdoesfpv ► tiny.cc/AdamGonInstagram
Sites I get my awesome FPV goodies from:
✅ Banggood ► tiny.cc/BanggoodFPV
✅ RMRC ► tiny.cc/RMRC
✅ AtomRC ► tiny.cc/Atom-RC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► tiny.cc/Amazon-FPV
✅ HobbyKing ► tiny.cc/HobbyKing
========ZCon Setup========
In the Air:
-56" Ritewing ZCon Twin ► Only available if you email Chris at Ritewing directly: ritewing@hotmail.com
-DJI O3 Digital transmitter and Camera ► tiny.cc/DJI-O3
-Sandisk 256gb V30 Micro SD for onboard 4k60f recording ► tiny.cc/Sandisk-256gb-V30
-2 x TrueRC Singularity antennas on the O3 ► tiny.cc/Singularity-72mm
-Matek H734 WLITE Flight controller (Running iNav6) ► tiny.cc/MatekH743wlite
-2 x Badass 2310 1680kv motor ► tiny.cc/Badass-2310-1680
-APC 6x4e and 6x4ep ► tiny.cc/APC-6x4
-Hitec HS225MG Servos ► tiny.cc/iiww8y
-2 x Little Bee 50a BLHeli32 ESC ► tiny.cc/LittleBee50a
-Tiny GPS Rx ► tiny.cc/220GPS
-TBS Crossfire Nano Rx ► tiny.cc/TBS-Nano-Rx
-Prodrone 868 tuned Dipole antenna ► tiny.cc/Tuned-dipole-868
-2 x 4,000mAh 5S in parallel ► tiny.cc/5S-lipo
-Red COB LED's ► tiny.cc/COB-LEDs
On me:
-DJI Goggles 2 ► tiny.cc/DJI-Goggles-2
-TrueRC X-AIR 5.8 MK II Pair for Goggles 2 ► tiny.cc/X-Air-Mk-II
-Sandisk 64gb V30 Micro SD for goggle DVR ► UK Link: tiny.cc/SanDiskV30UK - USA Link: tiny.cc/SanDiskV30USA
-TX16s Transmitter ► tiny.cc/Radiomaster-TX16s
-Crossfire Micro Tx V2 ► tiny.cc/TBS-Crossfire-TX16s
========3D Printed Parts========
Electronics bay tray ► www.thingiverse.com/thing:600...
Nose to hold DJO O3 ► www.thingiverse.com/thing:600...
Skid ► tiny.cc/Skid
Wall mounting hooks designed specifically for this wing (My design) ► tiny.cc/ZConWallHook
========3D Printing Equipment========
-3D Printer ► tiny.cc/FlSun-Q5
-PLA filament ► tiny.cc/EryonePLA
-TPU filament ► tiny.cc/SainsmartTPU
-PETG filament ► tiny.cc/SainsmartPETG
-Digital Calliper ► tiny.cc/DigitalCalliper
========Build equipment========
-E6000 glue ► tiny.cc/E6000Glue
-Soldering Iron ► tiny.cc/Soldering-Iron
-Laminating Iron ► tiny.cc/LaminatingIron
-Laminate ► tiny.cc/laminate
-Hot glue gun ► tiny.cc/HotGlueGun
-Foam Cutting Tool ► tiny.cc/vxgv0y
-Heat Gun ► tiny.cc/AdjustableHeatGun2000w
-Watt Meter ► tiny.cc/WattMeter
-3M90 spray adhesive ► tiny.cc/3M90adhesivel - Розваги
First time flying with the DJI Goggle 2 (tiny.cc/DJI-Goggles-2) and the image quality is so nice! A full kit list with links can be found in the video description, along with a bit more info about this flight. Thanks for watching 👍🏻👍🏻
That nose print is amazing!
I have been watching your channel since the early days of the Skywalker. I am still amazed that with each video you always surpass the quality of the previous one. Pure quality. All the best from Australia.
Ah nice! You've been along for the whole ride then 😁 My planes and flying style have changed a lot since the days of the Skywalker, but it's all been fun. Thanks for the support and great feedback, I appreciate it 🙌🏻 🙌🏻
Nicely done on the flying and an awesome edit. Love the terrain you fly.
Thank you so much 😊 It's a good location for it but I do need to find some new spots
Great video, I especially enjoy the view with the telemetry! Thanks for sharing!
Thanks for watching! I always find the OSD interesting too 😁
Beautiful scenery!!
It really is! Love flying here. Cheers
The surprise rainbow capture about a third of the way through was very cool. Great lines as always. Your osd setup is the bomb!
Thanks 😎 Yeah I saw a rainbow just before taking off so was hoping it would pop back out some time during the flight. Just shows how close I was to getting rained on again 😅
I'm loving flying with the O3 gear too. That picture!!! And the 4K capture with the gyro data means no GoPro needed either! Terrific flying - thanks for sharing.
Totally agree! Really like having no action cam on board. Image quality is great and the stabilisation is really good too
I always look forward to your presentations. Stunning! Long time fan from TN.
Thank you so much! I appreciate the support and great feedback 🤘🏻
Summer is just about over here, and I still haven't flown once. When life gets going it gets going fast
It's so bad isn't it :( I keep an eye out all the time and only got out once in July
Very very nice Adam. I admire your steady stick at such a low level flight. The visual is fantastic..
Thanks 😎 more to come
Thats one fast wing right there! Love it
It's my favourite 😎
Another belter Adam, cheers mate.
Thank you 😁🙌🏻
Breathtaking and impressive! Your speed at low level is just beyond any normal human being :)
Thanks Stuwe, I'm sure you've had lower and faster flights before 😁 I really think I can do better than this though... hoping for some good weather so I can give it a try 😎
Absolut perfect and really great flight💯.....big thumbs up👍👍
Thanks for watching and for the comment, appreciate it 😊👍🏻
I’m a UAV fanatic…and you my friend knocked it out of the park with this. Epic job 🔺
Thanks 😁👌🏻 plenty more to come when the weather allows 😵💫
My good god! Absolutely bloody incredible 🔥🔥🔥🤝
Thanks for the great feedback 🤘🏻😎
Man you're only getting better! Your speeds are awesome, that is like a friggin low level rocket. That FPV view looks even faster and lower than the HD! Must be FOV or overall image size or something tricking my brain. Nice flying bruv.
Thank you 🙌🏻 Yeah the FPV footage always looks a bit more realistic to the speed in my opinion, it's because the 'HD' footage is stabilised and cropped making it feel slower. Cheers
Very cool!!! And Fast!
Thanks 😎🤘🏻
Good Feeling watching this vídeo, FPV wing is awesome
Thanks! Glad you enjoyed it
That’s one hell of a walk if that goes down. Great flying and I really love the low and fast flying down mountains. The good thing about flying downwards is the model is always technically in line of sight all the time. Flying low altitude on the flat is the planet eventually gets in the way of the signal. 😊
Yeah I hope not have to make that walk. It will be a hike through bushes and a difficult recovery! Cheers
Love those canyon/river runs! Looks like such a fun place to fly!
They are a lot of fun to fly! It's a like a wing playground haha. Stay tuned for a formation run down these rivers coming soon :)
awesome video and flight
Thank you 🤘🏻
Really nice, feels like your flight cam is giving better quality than your main!
I noticed that too in the video. The 4k is definitely better quality than the 1080 live feed but sometimes in the smaller window it can look sharper, and YT can sometimes mess with the video quality unfortunately. Either way I'm happy with both live feed and recording, apart from in low light/dark as it gets quite bad then. Cheers
awesome duude! next level for sure
Thanks! 🙌🏻 😃 I still think I can do better...
Cool cinematic shot~ it's always so fun to fly over ridges! -dji FPV from Korea
Thank you. Yeah it's a lot of fun!
🔥🔥🔥🔥🔥
😃🤘🏻
Great video Mate !!!
Thank you 😊 👍🏻
Beautiful
Thank you 🤘🏻😊
Rated mate!
Thanks 😃🙌🏻
Wonderful video, congratulations.
Thanks 🙌
Beautiful flight :)
Thanks a lot!
That was cool 😎
Thank you 🙌🏻
superb
Thanks 🤗 thais is what we were doing when you met us that day. Except we were trying to do it while following each other. Was a bit turbulent to get as low as we wanted to but I have much lower runs down there since this video. Cheers
Waouh ! c'est vraiment beau ! Bravo !
Thanks :)
@@AdamGdoesFPV I had an FX61, it was pure joy! your wing looks much thinner! I really like !
Awesome!!!
Cheers buddy! Hope your printed planes are still going well!
@@AdamGdoesFPV ahhaa no, right now im enjoying Swordfish, but there is upcoming Falcon v2 which im planning to build :)
Nice video Adam! Low ans fast. Just how I like to fly FPV.
You and me both! Now to try it again... but lower 😅
That's crazy.I wish oneday I can fly like you.
It’s a lot of fun and anyone can do it with a little practice 😃
Awesome
Thanks 🤩
Great flying bro, new sub for tou 👌
Thank you and welcome to my channel 😎👋🏻
Aweeeesooommmeeee 👍👍👍👍👍👍👍
Cheers Matt 🤗😎
The image qality 3k out is so amazingly good!! I still fly analogue but this stuff is so much better!
Yeah it really is excellent! Nothing out there is better than the Goggle2 and O3 combo at the moment 🤘🏻
Wow. Great video!!! Very inspiring… I don’t think my AR Wing Pro would do that. Too unstable…
Nice work!
Thanks 🤩 the AR Pro is a great wing but not as stable as a Zcon 👍🏻
I assume you are using BF43COMPAT? Might have a look at BFHDCOMPAT if you want to push the OSD out to the edge. I think you need iNav 6.1.1. Very nice flying. Are you using gyroflow for the HD onboard recording or just letting the native DJI stabilization processing?
Yeah I'm already using betaflight compatibility mode but on 6.0. I will push the OSD out a little once I've updated. On previous flights I used Rocksteady but in this one I tried Gyroflow.
awesome my friend
Thank you 🙏🏻 😎
Incredible! Looks wery well tuned, even the roll looks straight 😍
Does dual motors make it more stable on the yaw axis?
Thanks 😊 it’s a great wing!
I don’t think having 2 motors really helps in yaw stability really. Especially as they’re so close together
Gorgeous !!! I love !!! I’ll have to try one day :)
What did you use to stabilised your video ?? Directly out of the cam ? When we compare with the flying view its much more smooth.
The O3 has 2 options for stabilisation. You can use built in RockSteady or you can use Gyro data and stabilise in Gyroflow. I used Gyroflow on this video
@@AdamGdoesFPV > Thanks for the information !
That was some very impressing flying in straight lines. Never have I seen such straight linery in my whole life. Bravo.
Haha thanks 😁🤘🏻
Wow
Thanks 😃🤘🏻
love the speed- that must have been a rush
Thanks! It's a lot of fun, looking forward to doing this again. Might even sent my 267kmph Drak up there this year
@@AdamGdoesFPV WOW, yes please do ! Would love to see that
digital fpv clarity is insane
It allows me to fly this low and spot the trees I used to hit on analogue 😅
Great stuff, are you happy with the range you get on Goggle 2/O3?
Thanks 😃 I haven't really tested the range on the O3 with the G2 properly yet but in this flight and out to 6km it's all good. Meant to be good for 23km but that's far beyond what I ever fly.
Great flight. The DVR is amazingly good with zero breakup. Flying through those valleys would kill my analog fpv feed. What kind of range were you able to get?
Thanks 😊 i used to fly 1.3g mostly, because like you say 5.8 analogue would be really bad in those valleys. Digital is so much more reliable than 5.8 analogue. I haven’t tested the range beyond 6/7km yet
I can see the xair on goggles so what antenna on the 03 cheers cool vid
Using 72mm TrueRC Singularity on the wing (tiny.cc/Singularity-72mm). Video description has a full list of every part I used :)
Did you have to do anything special to get the osd layout like that? I have the v2 goggles with the o3 , through iNav, when it’s connected the osd info is scrambled 🤯🤯
You have to have betaflight compatibility mode enabled on the OSD tab.
That beginning was on another level! Soooo good! Was it luck or did you wait?
And the flight too of course 👌
Haha if you mean the bee it was just luck and not planned. Last second thing 😆 thanks for watching 😎
Do you like flying this one more than the single motor version? Or your drak?
I enjoy flying the twin motor more... but the reason is not down to the airframe... it's because the video feed is just incredible from the O3 air unit and it allows me to fly lower than ever with confidence that I'm less likely to hit a tree (as I can see them coming!). The single and twin fly about the same to be honest. Both have been favourites and I'd struggle to recommend one version over the other. The Drak is great in high wind but I've not had chance to fly it as much because I keep having issues with it. It's currently in bits in my attic and might get a repair job over the winter.
99 throttle all the way ❤
Haha yeah I don't know why 99, I was at full throttle and my channel is configured correctly using the rx_range cli in iNav.
like#197/ simply colossal video, good views, much different than with a drone. Looks like a very good glider.
Thanks for the great feedback 😁👌🏻
Footage will never look as perfectly cinematic as a drone but I just love flying fixed wing, I find it a lot more fun.
Awwwwwwwwweeoommeeee
😎🤘🏻
😃😃😃😍😍😍
😎👍🏻
That wing sure goes!! So is it out with the 1.3ghz and in with digital? Seems even the hardcore 1.3ghz fans are transitioning slowly now.
I do still have analogue 1.3 planes and gear but don't fly them as often. I will still use them for the real hardcore flights... but in situations like this video the digital feed works flawlessly.
i mate me again,, any chance to can get on the inav, forum as we are getting a petition together to dji to get this msp opened for inav witch will benefit us all using o3 ,,
Hi, I’ll take a look 👍🏻
Danggg how far did you get there!
Not too far, just over 6k
Whats track called & were do you get it from please
ua-cam.com/video/FQpRQeLZDC4/v-deo.html
Do you get use to all that shakiness? would be cool to have a stablizated footage directly on your goggles
It would be awful to have a stabilised live feed on a high performance aircraft like this, you need to feel how its behaving or you'll crash
@@AdamGdoesFPVthat make sense. It's just that the stab feed is absolutely epic
@@asotelles for sure to watch back as a cinematic video with music it’s great 😎👌🏻 EIS is so good these days
Так и не пофиксили OSD на goggles 2?
I'm not sure I understand the question. Maybe it's the translation. The OSD is not perfect as it's betaflight compatibility mode. But for the most part it works fine. The Goggles 2 record it on the file though which is nice.
the low FOV and motion blur do this speed injustice. next time try adding some pixel motion blur to your footage
Why the non DVR video look so unsharp?
At times it can look less sharp and it’s probably down to a number of factors. Being cropped in order to stabilise, UA-cam compression and the fact that parts of this flight were in quite low light, which the O3 camera really doesn’t like.
😮😮😮km di distanza
😎
Looks 10times faster in the dvr/goggles... Like it usually does Hahaha
Yeah haha! The stabilised 4k recording has a way of making it look so smooth and a lot slower than it felt at the time 😅
When the Pilot is always higher than the plane....lol....A more suitable video description methinks....You must have a big capacity lipo in there....54 amps level flight!!!....lol...🤔😳😳😏😀🇬🇧
Haha there is a lot of this flight where the wing was higher than me... in fact I'd say most of it. Id does like to eat the amps, I have 8,000 5S on board 😎
@@AdamGdoesFPV Yeah, it's a monster for sure....lol...😏😀🇬🇧
Amazing flight.
But... DJI OSD font is ugly, and lack of proper fonts. They completely forgot that fixed wing, INAV, and Ardupilot community exist. So much Betaflight centric 😭
Thanks 😊 yeah the OSD isn’t great, especially once you compare it to all the nice sneakyFPV fonts we’ve seen recently. However, the OSD doesn’t really bother me and it’s definitely worth putting up with for the incredible image quality that comes with it 😃