You are a legend. I have been studying using video tutorial for the last 15 years, and your style of teaching is one of the best. Thank you so much for your dedication!
I never thought I would find a free good source to learn AutoCad from Zero to Hero. This was very helpful and everything was so good. Thank you so much for this, and for your efforts in making these tutorials.
i came across your channel by sheer luck, but what I learned ALOT IN 20MINUTES, you are a good communicator who is able to reach my dead stone brain to grasp this subject matter. you made me the subject look more interesting, KEEP THE GOOD WORK, thank you
14:00 You are not locked into that axis, you just have to hit TAB to allow you to switch to the polar angle and you can swap back and forth to specify any changes you want before confirming the second point. So you can, for example, type 100, hit TAB, type 45 for 45 deg, then hit TAB, edit it to 95 if you suddenly realize you want 95, tab back 24 deg, etc. Its not locked in till you actually click the second point down. Give it a try because it makes things way less rigid, this also applies to autodesk inventor and other 3D CAD packages, on almost any tool with multiple input types. Edit: Ah okay you go into this, fantastic! I had thought you might have left it out to not being confusing for beginners which I think would have handicapped them a bit in the speed department.
This is a very great source for those who are a beginner or even those who are in the midst of learning AutoCAD. The way you explain in this video is very interesting, easy to understand, make me watching until finish and give confidence. Thank you very much for sharing your knowledge of AutoCAD.
Thank you so much for this tutorial. As a beginner, I could understand everything explained in this video. Your English is perfectly understandable, coming from someone who's native language is also not English.
I´ve been thinking about giving a try to AutoCad, and this tutorial definitely made up my mind. The way you explain is amazingly clear, as well as pleasant. It will take some time but it´s absolutely a great opportunity. Best wishes.
Thank you very much. it's a very clear, interesting and helpful lesson. I found your lesson much better than my class and it helps me a lot. it is really a recommended lesson to everyone. Thank you
i move to another job where they use autocad thanks a lot i found this, hate to admit this that autocad is a shit compare to solidworks but this tutorial really helps me, this tutorial is so neat 1000 likes for me
Your pronunciation somehow sounds funny to me. But I understand your every word. Your explanation on the subject is the best I have come across. You are such a good teacher. Thanks a lot for your every video.
Good sir. Amazing work ☝️🤘thank you for the knowledge.as a engineering student these tutorials helping me a lot 🙏🙏 thank you for the time and effort 🙏🙏🙏..
muchas gracias por tu ayuda Dios te puso en mi computadora para lograr mas conocimientos Dios te bendiga Thanks God bless you for your wised. You appear on my way and now I improved all my knowledge. Tks Tks
Wow this is a great tutorial video. 😊👍 Even though I don't really have much access to a computer to try this, I could still definitely learn from this tutorials. Continue the great work. Thank you and God bless. 😊👍👍
I cant do the object snap tracking (20:28), it doesnt work when i type the length, is there anyway that i could make it work? And btw thank u so much for this amazing tutorial man
thank you very much ... your videos are of great help ... I have a question outside the box ... what are you using for screen recording? ... it also seems very professional and with a lot of features ... you know with the COVID-19 pandemic we are relying a lot on the online learning and the screen recording... thank you again for your cooperation and for these amazing tutorials
Hello, There! I just began to watch your videos and I loved them. Thanks so much for sharing!!! I would like to know if you know if there is a website to download Schedules; such as foundation schedules or electrical schedules. Please, let me know. Thank you again for your videos, God bless you!!!
Thank you so much for making Autocad looks so easy...i downloaded your exercises but (for the life of me) i can't understand, in exercise 7, the angle we should consider when draw the 30 units line or the offset of this line. thank you .
In the exercises you can just use the units that you want. The intention was just to practice basic drawing skills, regardless the units. Thanks for watching.
@@CADinblack I understand that but the exercises have specific dimensions (for example, 20), and if I do not set the appropriate units and type in 20 when drawing the line, the line ends up being the wrong size....
hi i am a beginner when i draw line with two points by their coordinates such as (10,5) and (20,5) it gives me line with angle why ? what should i turn off many thanks
Open the full Playlist:
ua-cam.com/video/cAgpDFTHxpY/v-deo.html
...to not miss all the parts: Thanks for watching.
So Simple and Extra ordinary. CAD was not so simple before this video...
So much useful
I'm new here. Please how can i get those exercises in odf form ?
I don't know who you are , But I will find you and I will thank you, You are a living legend men
Thank you +Cristian Venjo Reyes. I am happy that I helped you with learning Autocad
Me too my friend
I’m following ur talk ❤❤❤ thanks
You are a legend. I have been studying using video tutorial for the last 15 years, and your style of teaching is one of the best. Thank you so much for your dedication!
Thank you very much for your support +Hoang Dustin. I hope you continue learning!
The best Teacher that I have seen ever, big thanks for you
The way he express himself is so clear, he saved me. I took his classes. Highly recommended!
best teacher for autoCAD in the WORRRRLLLD
I never thought I would find a free good source to learn AutoCad from Zero to Hero. This was very helpful and everything was so good. Thank you so much for this, and for your efforts in making these tutorials.
Absolutely fantastic tutorial. I am an absolute beginner, never used CAD. So clean, precise, easy to understand. Can't thank you enough.
Thanks a lot for your comment MM LG. I wish you keep practicing.
i came across your channel by sheer luck, but what I learned ALOT IN 20MINUTES, you are a good communicator who is able to reach my dead stone brain to grasp this subject matter.
you made me the subject look more interesting, KEEP THE GOOD WORK, thank you
Thanks a lot. :)
14:00 You are not locked into that axis, you just have to hit TAB to allow you to switch to the polar angle and you can swap back and forth to specify any changes you want before confirming the second point.
So you can, for example, type 100, hit TAB, type 45 for 45 deg, then hit TAB, edit it to 95 if you suddenly realize you want 95, tab back 24 deg, etc. Its not locked in till you actually click the second point down. Give it a try because it makes things way less rigid, this also applies to autodesk inventor and other 3D CAD packages, on almost any tool with multiple input types.
Edit: Ah okay you go into this, fantastic! I had thought you might have left it out to not being confusing for beginners which I think would have handicapped them a bit in the speed department.
Really u r explain peter than who in class ,Is very simple , I will watch all
Thanks Omar. Hope you keep learning
You are a very needed man in this universe.
Thank you very much +mbulelo gumede
I am glad that you liked this video.
This is a very great source for those who are a beginner or even those who are in the midst of learning AutoCAD. The way you explain in this video is very interesting, easy to understand, make me watching until finish and give confidence. Thank you very much for sharing your knowledge of AutoCAD.
Thank you very much Binsar. It is a pleasure to hear these kind of references. All the best.
You're such a legend 🙌. Thank God I found this channel after long searching for the best Autocad tutorial
The best videos for learning CAD
This is so very helpful! His explanations are so detailed and easy. Hr definitely deserves more likes and subscribers!
You are a life saver. Completely understand every step of the way. A subscriber here
Thank you very much for your appreciation +Luziya Williams
I have certificate for autocad pls refers the job
Thank you so much for this tutorial. As a beginner, I could understand everything explained in this video. Your English is perfectly understandable, coming from someone who's native language is also not English.
Hello Jelena. I am happy this video helped you!
I´ve been thinking about giving a try to AutoCad, and this tutorial definitely made up my mind. The way you explain is amazingly clear, as well as pleasant. It will take some time but it´s absolutely a great opportunity. Best wishes.
Hello Renard. Thanks a lot for watching, and I am happy this is what you were looking for! All the best.
Thank you very much. it's a very clear, interesting and helpful lesson. I found your lesson much better than my class and it helps me a lot. it is really a recommended lesson to everyone. Thank you
i move to another job where they use autocad thanks a lot i found this, hate to admit this that autocad is a shit compare to solidworks but this tutorial really helps me, this tutorial is so neat
1000 likes for me
Thank you very much Vergel. I wish you keep learning
Sir, thank you. Respect from India 🔥🌍
You are welcome Ammu
this is one of the best tutorial videos i have watched so far. i understood everything written well and good . tnx you so much
Thank you so much Davis. I am happy it helped you!
Your pronunciation are so clear and your explanation are so easy to comprehend. Thank you it's a great help!
BTW, I think you have a knack for teach.
Your pronunciation somehow sounds funny to me. But I understand your every word. Your explanation on the subject is the best I have come across. You are such a good teacher. Thanks a lot for your every video.
Thank you very much. I hope you keep learning. All the best!
I LOVE the way you teach. Thank you so much for this.
you killed it,,,,,,,well expained
Simple and great explanations. Thanks making this amazing course free.
Thanks Rafael. I wish you keep learning. :)
Good sir. Amazing work ☝️🤘thank you for the knowledge.as a engineering student these tutorials helping me a lot 🙏🙏 thank you for the time and effort 🙏🙏🙏..
Thank you so much for this tutorial. Its a great help to us. More power and God bless you.
Thanks dear, it was very useful to me.
Love your AutoCAD videos!
Thanks a lot +Bar Designers
Thank you sir, Thanks alot this channel is really helpful for me.
Great tutorials. Very detailed, thorough, and easy to follow. I will definitely continue with this series and recommend.
Thank you Kait. I appreciate it a lot.
muchas gracias por tu ayuda Dios te puso en mi computadora para lograr mas conocimientos Dios te bendiga
Thanks God bless you for your wised. You appear on my way and now I improved all my knowledge. Tks Tks
Wow this is a great tutorial video. 😊👍
Even though I don't really have much access to a computer to try this, I could still definitely learn from this tutorials. Continue the great work. Thank you and God bless. 😊👍👍
Studying architecture, missed my Autocad introduction, started this list, I am currently ahead of my class xD
Thanks a lot for watching. I am glad you have succeed with these videos.
clear and concise. amazing work
The best tutorial ever.
You're a hero my man
😀 thanks dear, it was very useful.
Love the way you use chapters...
Thanks a lot for your support cadsquared
Thanks for this tutorial.... God bless you sir...
Thank you very much Jonathan
It's very clear! I like it. Thank you!
Thanks for your video, it is very detailed and easy understanding
Thank you very much +Sun Apollo
Great video. thank you
so happy i found your videos!!!
If someone is scared of learning this, its sooo simple and strait forward, dont worry jsut take your time and learn day by day progressivly
Thanks for your comment +KUKU I am happy this was useful for you.
thanks so much, please i tried adding length of 100 and the line over extended .pls how can I keep mine short like yours yet with 100 length
it is very awesome 👍👍😎😎
Important For The real design !
best auto cad videos, thanks sir🤝
Excellent way of teaching, really, helpfull.
Thank you very much +Asad Nadeem
Hey... CAD in BLACK i like youre excercises keep up sharing the knowledge
Thanks for your appreciation. Take care.
14:10 Orthomode
14:40 Draw a line with an angle
thank you it's very helpful for me ..
what units and precision values u have used to draw?
Thank you ❤
you are so good😀
Thank you very much Harleen!
I cant do the object snap tracking (20:28), it doesnt work when i type the length, is there anyway that i could make it work? And btw thank u so much for this amazing tutorial man
thank you so much
it’s really helpful
Just what i needed
Thank You!!!!!
Thank you very much
Excellent videos, helpfull videos
انا استفت من حضرتك كتير جدا شكرا ليك
i have liked the teaching.. thanks
wow, Gem tutorials, thank you
A milion of Thanks❤❤
Thank you.
You are welcome +Building Sliven
Thanks.
This video is really helpful! Thank you
where can I find the pdf of the exercises for the lessons?
GOAT in AutoCAD
:). Thanks a lot for your review!
This is very helpful. Thank you for this
Thank you very much for your comment Myra
Thankyou!
You are welcome Tamashinoyume!
hay can we have certification for this??
do you have videos for the exercise ? thanks
thank you very much ... your videos are of great help ... I have a question outside the box ... what are you using for screen recording? ... it also seems very professional and with a lot of features ... you know with the COVID-19 pandemic we are relying a lot on the online learning and the screen recording... thank you again for your cooperation and for these amazing tutorials
Hello and thanks for your question. The software is Camtasia 2019. I find it quite good and intuitive, specially for creating video tutorials.
hi is there a free version download of this autocad version for students ? thanks
New subscriber. Thanks
thank you so much ❤️
Hello, There! I just began to watch your videos and I loved them. Thanks so much for sharing!!! I would like to know if you know if there is a website to download Schedules; such as foundation schedules or electrical schedules. Please, let me know. Thank you again for your videos, God bless you!!!
Thank you so much for making Autocad looks so easy...i downloaded your exercises but (for the life of me) i can't understand, in exercise 7, the angle we should consider when draw the 30 units line or the offset of this line. thank you .
What units should the file be set up in in order to complete the exercises you have provided?
In the exercises you can just use the units that you want. The intention was just to practice basic drawing skills, regardless the units. Thanks for watching.
@@CADinblack I understand that but the exercises have specific dimensions (for example, 20), and if I do not set the appropriate units and type in 20 when drawing the line, the line ends up being the wrong size....
Hi can you help me understand t reading in AutoCAD thank you
hi i am a beginner when i draw line with two points by their coordinates such as (10,5) and (20,5) it gives me line with angle why ? what should i turn off
many thanks
Hello Hamzeh! That shouldn't happen if you insert that coordinates. Are you pressing TAB to switch from Xcoordinate to Ycoordinate?
Thank you, outstanding 👍
Thanks a lot Hemen! I am glad this tutorial was useful for you! Keep learning
Thanks u sir
I think units is important it should be in part 1 or 2
thanks teacher
Is there any video where you go over how to do the practice problems? the last ones stumped me
Do you mean exercises? ua-cam.com/video/MUgZDUdv60A/v-deo.html
Is this still applicable for 2024 version
very good bro.. you are a awsom teacher.
how about doing it in a laptop
The tab to lock distance at 70 and for angle is not working for me. Am I doing something wrong? Am using autocad 2024.
Thank You!
Thank you dear sir your tut are helpful
Thank you :) very much
my ribbon is on the side for the autocad is there a way to fix it?
sir,can we use these in autocad 2013?
Hi Rishman. Most of what I explain in this tutorial is the same back in that version. If something does not work, please post a comment.
😍😍😍