Youve GOT to be kidding. Im an ironworker for 37yrs, i love building models AND Godsmack is my favorite band. Thank you for all that work......and for leaving women and drums out of it. I dont think i woulda survived if they were included. 🤯
oh really, awesome! thanks, i messed up at the beginning, was suppose to raise the A-frame when it got unloaded off the trailer, but raising it on the model is a pain, so i waited as long as i could before messing with it.
Nice video...Here in Sacramento, Calif, a few weeks ago, I saw one of these cranes take down a 220 foot Tower crane...and the MAXIM has a crane depot here too.
@bfurnace this one as it sits in the video, fully together, was 740 i think, just depends on the model, the string is connected to a drum that can be turned with a special key, and it lets you raise it up or down
Liked the video but two important steps, when you assemble/disassemble is when you first receive the crane on the truck the gantry or A frame must be rolled forward or the upper works will flip over backwards on the truck. Another thing is you can not swing the crane around during assembly/disassembly due to the crane having too much counter balance on the rear of the crane. I know its just a video !!!!!
Nice vid! How long did it take to shoot all this? Little advice, use a remote on the camera to avoid the wobbling during the video. Nice crane, those things are really huge, even as models.
You'd be in heaven at my job. I am a PM at Vogtle Nuclear plant where we are building 2 new nuclear reactors and we have the Biggie designed and built worlds highest capacity derrick crane. Capable of lifting 7,500 tons! 👍
cranedude07 Yup the counter weight for the gin pole is an enormous concrete block poured beneath the finished grade! I really like your videos keep up the good work. Your stop motion is very cool. 👍👍👍
@cranecollector101 haha yeah, sorry it took so long, i just really havent had time or didnt feel like making it but now its done, onto the next one, thanks
Weissbrothers.us, dhsdiecast.com, 3000toys.com, fmb-shop.de, are a few places I get them. They are not RC, they are manually operated by hand and a winch key.
Roughly how much are those models? I would imagine they are pretty pricey. How do you control the line? Do the models have wheels that let you spin out the lines?
Hi cranedude07, really wicked video! And this is a relative 'baby' compared to the Manitowoc 31000. You will have to assemble it on the floor I think? mrbluenun
Dude you should go to the next step, lengthen the video and input text and make it into an assembly safety video. Sell it for $500-$900 each and make some money on all your efforts. It should go over big time! Contact a manufacturer and sell it to them!
Cranedude07, Do you also have the Conrad LR1280? if so could you send me a pic of it side by side your NZG Liebherr 855 crawler? I'm trying to see the difference in size Just recently purchased the LR1280 but I haven't gotten it yet. If it's not so too much trouble man. Cheers Gene
@@briancaldwell1798 no I didnt build it, someone else built it and sent it to me for me to do the video of it, to help get him more views of it. I havent talked to that guy in years, I doubt he even still builds them.
Do you think you could contact him if possible I'll buy the crane and pay him to in stall everything. I've always built rc nitro helicopters and planes but not shore how it works in the rc cranes to some what.
Youve GOT to be kidding. Im an ironworker for 37yrs, i love building models AND Godsmack is my favorite band. Thank you for all that work......and for leaving women and drums out of it. I dont think i woulda survived if they were included. 🤯
Bro that was awesome. Loved the stop motion, loved the intricate build process.
I remember when I love watching this at the age of 3 “true”. Good times😭😭😭
AWESOME!!!! I am a crane operator and I love your videos. Cheers.
@psibster thanks, the song is called "awake and alive" by skillet
Thank you so much for assembling my chillhood with this video
I thought I was the only one in the whole world that loved cranes!
Thank you for your video!
oh really, awesome! thanks, i messed up at the beginning, was suppose to raise the A-frame when it got unloaded off the trailer, but raising it on the model is a pain, so i waited as long as i could before messing with it.
Nice video...Here in Sacramento, Calif, a few weeks ago, I saw one of these cranes take down a 220 foot Tower crane...and the MAXIM has a crane depot here too.
@Macones3 no they wont, the 1750 boom is bigger and is made by a different model maker other than the the 1300
I am not a crane fan but that video was amazing.
@bfurnace this one as it sits in the video, fully together, was 740 i think, just depends on the model, the string is connected to a drum that can be turned with a special key, and it lets you raise it up or down
Damn dude! I haul cranes and help set them up and your videos are spot on
liebherr lr 1300 1 : 50 uma das mais belas miniaturas de minha coleção
Great choice in music. Godsmack 👍
great video looks really cool 😀👍 Perfect
So awesome! Great job!
@EscavationNation thanks! glad you like it, its called awake by godsmack
Breathless! That is absolutely amazing! I really liked it, think it`s my new favorite vid from you :D
I´m also glad to see, it finally made to here.
BaIasan
Right on! You are a #17 Kenseth fan! And also great video, one of my favourites!
@Clarker85 im glad you enjoy them, thanks!
Liked the video but two important steps, when you assemble/disassemble is when you first receive the crane on the truck the gantry or A frame must be rolled forward or the upper works will flip over backwards on the truck. Another thing is you can not swing the crane around during assembly/disassembly due to the crane having too much counter balance on the rear of the crane. I know its just a video !!!!!
@225spinace thanks, glad you enjoy them
Fantastic work.
Thats was awesome!!
Beautiful.
Awesome job!! That is a very nice crane, your videos are great.
Mark (bigcranes)
@tunespt took 4 days, thanks for the advice, ill have to invest into one, never thought of getting one, yeah they are big models, thanks
@tunespt took 4 days, thanks for the advice, ill have to invest into one, never thought of getting one, yeah they are big models, thanks
Nice vid! How long did it take to shoot all this? Little advice, use a remote on the camera to avoid the wobbling during the video. Nice crane, those things are really huge, even as models.
Great job!
WOW some model and some video. Alot of work there. 5 stars from me too. : )
Awesome vid
Impresionante vídeo para poder ver como se monta una LR 1300 un gran vídeo, en que escala son tu colección, asi como donde las compras.
Imagine these model can be taller than your house...
i need to get one of them its been a while sence i have seen one of your vids but well done for a ky man lol
@jrshields2123 thanks alot man, it means alot, it took me 4 days to make
amazing! Very smooth, a great improvement over some of your older videos (no offence but alot of them were quite choppy). Cant wait for another!
Nice video. How long did it take you to make the video?
@wasabi359 glad you enjoy it
I LOVE Your videos Cranedude07
wow thats amazing!!!
@Boatboy6 thanks, yeah, ive learned more since my first videos, i didnt have a tripod back then
The band is skillet. Great band.
You'd be in heaven at my job. I am a PM at Vogtle Nuclear plant where we are building 2 new nuclear reactors and we have the Biggie designed and built worlds highest capacity derrick crane. Capable of lifting 7,500 tons! 👍
Kenneth Chester awesome, I've seen a few videos of that plant and the Crane. that thing is crazy, uses the earth as its counterweight!
cranedude07 Yup the counter weight for the gin pole is an enormous concrete block poured beneath the finished grade! I really like your videos keep up the good work. Your stop motion is very cool. 👍👍👍
From who do you buy most of your models?
Kenneth Chester I get them from
diecastmodels.co
dhsdiecast.com
evot-usa.com
weissbrothers.us
3000toys.com
Kenneth Chester I get them from
diecastmodels.co
dhsdiecast.com
evot-usa.com
weissbrothers.us
3000toys.com
@cranecollector101 haha yeah, sorry it took so long, i just really havent had time or didnt feel like making it but now its done, onto the next one, thanks
@vipyfz it is taller than the 1280 by about 3ft
@biginchhemi thanks mark!
thats awesome man thanx!
@Cat9deere9 thanks!
Where can I buy one of these awesome toys? Are they RC? Love your enthusiasm towards all of your collection!!
Weissbrothers.us, dhsdiecast.com, 3000toys.com, fmb-shop.de, are a few places I get them. They are not RC, they are manually operated by hand and a winch key.
@TheBobcatbeast yeah, it gets up there
@gph1972 thanks alot
@cranedude07 ha you also got alot of time on your hands nice collection to!
@MackTrucksOnly thank you
Wow! Amazing collection! How many cranes do yo have?
@Coolrockndad thanks
@WesternStar4900SA Yup, thanks
@ariels36 thanks! i have 32 crane models
@rabbitsmeller400 thanks man!
@Grimace3076 thanks!
It's like a Minecraft singer singer singer
@328DLCR thanks!
@cat325ccr thanks!
FANTASTIQUE
@bigdan45322 thanks!
awake by skillet
very good videos, where I can get this type of crane??
@zachattak2 thanks!
0:23 lunchbox for Crane 😂
nice video looks taller than the 1280 or is it me
@cat963d thanks
Roughly how much are those models? I would imagine they are pretty pricey. How do you control the line? Do the models have wheels that let you spin out the lines?
@ahorro23 dhs diecast, evot-usa, 3000toys, or diecastmodels.co
Hi cranedude07,
really wicked video!
And this is a relative 'baby' compared to the Manitowoc 31000. You will have to assemble it on the floor I think?
mrbluenun
love the video what a brilliantly made model . onc critisism shame about the music its very irritating . but apart from that awsome video
Amaizimg 👍👍👍😁
@mag1381 thanks
that was great
Dude you should go to the next step, lengthen the video and input text and make it into an assembly safety video. Sell it for $500-$900 each and make some money on all your efforts. It should go over big time! Contact a manufacturer and sell it to them!
@stegro84 thanks
@77cicciomio thanks
Cranedude07, Do you also have the Conrad LR1280? if so could you send me a pic of it side by side your NZG Liebherr 855 crawler? I'm trying to see the difference in size
Just recently purchased the LR1280 but I haven't gotten it yet.
If it's not so too much trouble man.
Cheers
Gene
Maaf bang klo mainan ini beli nyah dimana yah?
Let's see some lifts
good
you have the wrong band in the music thing.
hell ya
7/10
Are these cranes rc ???
No, they are manually operated by drum keys or by hand
You did a great job buddy
Did you build a rc manitowoc 16000 for a guy on here that has a vidio on the build. I would pay you to help me out
@@briancaldwell1798 no I didnt build it, someone else built it and sent it to me for me to do the video of it, to help get him more views of it. I havent talked to that guy in years, I doubt he even still builds them.
Do you think you could contact him if possible I'll buy the crane and pay him to in stall everything. I've always built rc nitro helicopters and planes but not shore how it works in the rc cranes to some what.
Cranes and like jack Allen
H
Yeah just like construction simulator 2015
good
crane city
Komentar. 💯
чеза музыка идиотская