CENTRIC RELATION- Episode 4: Mounting on a SA articulator

Поділитися
Вставка
  • Опубліковано 8 січ 2025

КОМЕНТАРІ •

  • @dr.g.samuelsimpsy2336
    @dr.g.samuelsimpsy2336 3 роки тому

    Sir this is Dr Samuel Endodontist. I have become a great fan of you. Loved your oration. I have searched so many videos before nothing was very crisp and clear like this sir. Thank you so much.

  • @gaynorchen3962
    @gaynorchen3962 3 роки тому +1

    You are a very good communicator. Using simple principles to explain complex theories and your use of analogies, makes it better for me to not only learn but to remember your techniques. Thank you for sharing!

  • @Xbox12469
    @Xbox12469 4 роки тому +1

    Your way of speaking gives great clarity. Thank you for your videos!

  • @mikefredo9046
    @mikefredo9046 3 роки тому +1

    You are a great teacher and professional doctor. More videos on occlusion please doctor. THANKS!

  • @operman828
    @operman828 3 роки тому +1

    Best video I've ever seen.Verry informative,simple and clear.Thank you for sharing✊

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  3 роки тому

      My pleasure...
      Could u plz write me a review...
      You could mention about me as a person, a clinician, a speaker, about how I may have helped you grow...
      Would truly appreciate that..
      Sharing the link here
      g.page/r/CahKWVuQHnHlEAg/review

  • @kaushnish
    @kaushnish 3 роки тому +1

    Dr Moez, I have been following your videos for a while and have learnt so much more than attaending a live class. Your animations and images make the understanding of this difficult topic much easier. You definitely deserve all the accolades. Hope to see you sometime soon

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  3 роки тому

      That's so sweet of you...
      Could u plz write me a review...
      You could mention about me as a person, a clinician, a speaker, about how I may have helped you grow...
      Would truly appreciate that..
      Sharing the link here
      g.page/r/CahKWVuQHnHlEAg/review

  • @СилвияТонева
    @СилвияТонева 2 роки тому +1

    Big thank you for those webinars. Made it all clear. Amazing work doctor. :)

  • @luisfelipeguilardi6041
    @luisfelipeguilardi6041 4 роки тому +1

    Congratulations on the beautiful presentation throughout the sequence of 4 videos. You were very clear and easy to understand. Thank you very much.

  • @vabshrivastava
    @vabshrivastava 4 роки тому +1

    Thankyou sir ...your videos made me to understand the concept of prosthodontics..your way of teaching is commendable ..

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  4 роки тому

      That is so west of you to share... I am glad to be of help my friend... Hope you have subscribed to the channel... Soon posting a plethora of videos

    • @vabshrivastava
      @vabshrivastava 4 роки тому

      Thankyou sir for your kind words..looking forward to see your vedio related to vertical jaw relation..how to determine vertical dimension at rest and occlusion in FMR.

  • @soeffincray2751
    @soeffincray2751 4 роки тому +1

    Excellent presentation Dr. Moez
    Keep doing the Good work
    Dr. Girdhar Kurukshetra

  • @evelynestefan2496
    @evelynestefan2496 4 роки тому

    Thank you Dr. Khakiani, excellent and clear review of mounting steps.

  • @anamdeepsingh2807
    @anamdeepsingh2807 4 роки тому +1

    Thanks a lot Sir, for the explicit demonstration

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  3 роки тому

      Glad to hear so...
      Could u plz write me a review...
      You could mention about me as a person, a clinician, a speaker, about how I may have helped you grow...
      Would truly appreciate that..
      Sharing the link here
      g.page/r/CahKWVuQHnHlEAg/review

  • @reenanagrecha9071
    @reenanagrecha9071 4 роки тому +1

    Thank you very much sir.
    Excellent teaching in all 4 series.

  • @TheAxxz
    @TheAxxz 2 роки тому

    Lovely dr, cant wait to join your course, keep it up ❤️❤️

  • @shahabazshabz1027
    @shahabazshabz1027 4 роки тому +1

    Thankyou sir for wonderful explanation 🙌🏻🙌🏻🙌🏻

  • @kokoliliful
    @kokoliliful Рік тому

    when you mount the lower cast with the bite registration material (CR record) do you adjust anything on the incisal pin? Either raise the pin according to thickness of bite registration material or just leave it at 0 (once set, just let the incisor pin to drop and accept the new value as the zero)
    Thank you for your kind answer!

  • @anoush5418
    @anoush5418 Рік тому +1

    Lovely video Sir, what protocol do you follow after the mounting casts in CR? Do you drop the pin and proceed further? could you please explain?

  • @dr.amitsadhwanimdsprosthod2866
    @dr.amitsadhwanimdsprosthod2866 4 роки тому +1

    Superb, Moez bhai, #moezwebinar, a concept which one shouldn't miss on.

  • @rosy2493
    @rosy2493 4 роки тому +1

    Thanks a lot for ur webinar sir. Really helpful for my neet MDS preparation.. please do make more videos sir.!!

  • @dr.ankitjindal7105
    @dr.ankitjindal7105 4 роки тому +2

    Thank you sir for your excellent presentation on CR... Its helps a lot.. Please also tell us the company name of facebow..

  • @VishalGupta-ip2kx
    @VishalGupta-ip2kx 2 роки тому +1

    Gr8 mentor. Let's of love

  • @poojak3772
    @poojak3772 3 роки тому +2

    Great video Sir.
    I had a little confusion, did you alter the incisal pin when you placed the bite and later upon completion of mounting again did you place it at the
    0 level?Kindly help me through it.

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  3 роки тому +1

      So the CR record was made at an increased VD owing to use of Unwind MD by MIK Dental. Hence lower mounting was done at +5 in compensation... The same was then dropped for final work...

    • @poojak3772
      @poojak3772 3 роки тому

      @@DrMoezKhakianiMDSMumbai Why there are only 5 annular groves (both up and down )from the prominent midline groove on the incisal pin of a hanau articulator?

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  3 роки тому +1

      Don't really recollect the Hanau Pin but typically most SA articulators have 20 lines 1mm apart...

  • @khawlahfaydhi4976
    @khawlahfaydhi4976 4 роки тому +1

    thank you .. very informative

  • @sanaarasheed433
    @sanaarasheed433 4 роки тому +1

    excellent explanation and thank you again, but allow me to ask you about zeroing the articulator. what I know,,, putting the articulator in zero position means the incisal pin and the condylar mechanism , both the sagittal and lateral, should be in zero position; why you put it in 20 degree?? kindly explain this point and I appreciate your cooperation.

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  4 роки тому +1

      So Sanaa that's another aspect of prostho that is baffling... Setting the Articulator to company recommendations is what they call zeroing of the arriculator... It is apparently to do with averages or values that allow the system to work like it's supposed to... It applies to all Articulator designs regardless of make or model

    • @sanaarasheed433
      @sanaarasheed433 4 роки тому

      @@DrMoezKhakianiMDSMumbai so this value is the recommendation of corident cs400 articulator? I have CS600 one, do you recommend to use the same setting when mounting the upper cast?
      Thank you

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  4 роки тому +1

      @@sanaarasheed433 yes... The same value should be used... But remember... This value has no role to play for maxillary mounting... It is important when mounting the mandibular cast... Best wishes...

    • @sanaarasheed433
      @sanaarasheed433 4 роки тому +1

      @@DrMoezKhakianiMDSMumbai Thank you so much
      God bless you

    • @kavita8261
      @kavita8261 7 місяців тому

      Please share the mean values for whipmix articulators

  • @dr.himanshuoberoiconsultan488
    @dr.himanshuoberoiconsultan488 4 роки тому +1

    Thank you very much Sir.
    Can u tell the difference between csa 600 and csa 650???
    Corident people are selling 650 only now.

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  4 роки тому +1

      So the only difference (imho) is an additional nut screw to hold the condylar elements in place which was a concern with the 600 unit when adjusting the Bennett side shift... regardless, I am not a believer in the use of side shift or Bennett angle much so personally prefer the 400... In fact the 350 is a great addition to their range...

  • @justintan5899
    @justintan5899 3 роки тому

    Do you use a facebow record to transfer the maxillary position to the articulator? How else would you capture the occlusal plane/cant and midline?

  • @aryannaghavi
    @aryannaghavi 3 роки тому

    would you mind explaining to me after you send this to the lab what happens? then they add wax to the model and later spruing?

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  3 роки тому

      So the lab sends back a Waxup and we perform a test drive to convince the patient and assess function/phonetics etc...

  • @sergioluna2815
    @sergioluna2815 2 роки тому

    How many millimeters should the incisal pin go up so that when I remove the bite registration it stays at 0? Thank you very much for sharing your knowledge. Kind regards from CD mex.

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  2 роки тому +1

      There is no fixed value to this number... Purely because vertical overbite between anteriors is very subjective and varies from patient to patient... Besides getting to the zero mark has no clinical relevance... So no need to mull over it...

    • @sergioluna2815
      @sergioluna2815 2 роки тому

      @@DrMoezKhakianiMDSMumbai thank U Dr.👍👍

    • @parikshitgupt3055
      @parikshitgupt3055 16 днів тому

      ​Hello sir. You make very informative videos .. thank you sir...
      Just need to clear myself on this point that, is increase in vertical pin equal to the thickness of anterior deprogamer/luica jig in CR. if yes plz suggest how to measure that thickness... coz i think if it varies even by 1mm it will change the anterio-posterior cant of Maxillary occlusal plane​... further will effect the visualisation for any diagnostic waxs up.. plz clear me... thank u sir@@DrMoezKhakianiMDSMumbai

  • @heba_prostho3102
    @heba_prostho3102 3 роки тому +1

    Dr.
    I didn’t get the zeroing part. Could you please elaborate ?

    • @DrMoezKhakianiMDSMumbai
      @DrMoezKhakianiMDSMumbai  3 роки тому +1

      It's a way of preparing the articulator for mounting... Not very important with Arcon types

  • @sachinkundra9860
    @sachinkundra9860 4 роки тому

    Thank you so much Sir👌

  • @victorhugoparedesramirez2122

    Very good.

  • @sandeepsachchade3188
    @sandeepsachchade3188 4 роки тому

    Palatal tooth cap me gap aye to kya treatment kre

  • @zonachristian9746
    @zonachristian9746 Рік тому

    Ok ..but u are dentist..why are you mounting models? Aint it better you to take impressions and leave DTs to do their part of the work