Це відео не доступне.
Перепрошуємо.
Farming Simulator 22 Forestry Tutorial - Base game equipment!
Вставка
- Опубліковано 15 сер 2024
- #FarmingSimulator22 #ForestryGuide #ForestryTutorial #FS22BaseGame
🌲 Hello and welcome to this short guide! 🌲
This video will showcase how to set up a base game forestry operation from start to finish, using the Cut-to-length tree harvester, forwarder, and the forestry MAN truck. The only mod in use is the map called 'Karhuvaara,' which is available for both console and PC players. Other than that, no other mods were used for this video.
0:00 - Intro
0:25 - Cut-to-length Tree Harvester
3:37 - Forwarding
7:09 - Forestry MAN Truck
If you enjoyed the video Like and Subscribe for more videos! It would be much appreciated! 👍
/ @bambis_gamerhut
----------------------------------------------------------------------------------------------------------------
📱 Socials:
Discord • / discord
----------------------------------------------------------------------------------------------------------------
📰Verified Giants Partner.
Use the partner code ''BAMBIS'' if you want to support the channel! 😁
🖥️ Farming Simulator 22 website • www.farming-si...
✅ Buy Farming Simulator 22 on PC • www.farming-si...
✅ Buy Farming Simulator 22 Platinum Expansion • www.farming-si...
🎵 Music from Epidemic Sound • www.epidemicso...
⬇️ Song and Artist ⬇️
- Inner Circle by Tape Machines
- About to Explode by Daxten, Wai
- Ease With the Breeze by Tape Machines
#FS22Timelapse #FS22 #FS22ForestryOperation #FS22Tutorial #FS22Guide
Would love to see a platinum dlc tutorial!
Noted! 😁
This is an amazing tutorial for me. Thanks for the guide video!! I will definitely be using it for my new playthrough. Previously i couldnt figure out what was good to use and had no idea that harvester cannot cut oaks/american elm down..and i gave up after spending too much money on equipment. 😂 This time i feel more confident after watch urs. Thanks again!
Thank you so much! I'm glad to hear that the video helped you out. Best of luck with your new playthrough! 😁
We definitely need more of your forestry tutorials. The way you stack the wood ist truely unbelievable ❤
Thank you, it's really appreciated! 😁
Forestry operations are not my favorite game style, but it catched my attention since Holmakra have started. Thanks for your videos.
Thank you! It really means a lot! 😁
Thanks so much for this video! It was and will be very necessary for me!😍❤
I'm glad you found the video helpful!! 😁♥️
I love the forestry element in the game as I am not a farmer so this is a lot easier for me to grasp and be profitable. Thank you for the information and would also love to see a Platinum DLC version as well. Thank you 🤘
Yea, that's relatable. I always start out with forestry to earn enough money to build the farm. 😅
You make picking logs up so easy I gave it a go for a good 10 min then just slapped that crazy Prinoth M650 on the back of a tracked 1167 and back down the tree line in about 30 seconds haha
Haha yea, that's one way to do it! 😂
I really like this video and it was very helpful. And I really like that map because it's Finland map 🎉 🇫🇮🇫🇮👍. Very good video and also thanks to use rotne😊
Thank you so much! I am Glad you liked it! 😄
Yea, i remembered you asked for it a few videos back, so i wanted to deliver, hehe. 😁
Tufvfceguf😅😅😅😅😅
Dankeschön🤗. Du machst das großartig 🫠💪👍
Thank you so much! 😄
would like to see more tutorial, or tips and tricks to control wood for dangle processor head. its hard to keep neat and tidy piles. or sharing your setting for wood harvester control mod
If you haven't, you can check out my Platinum Edition tutorial where I use the dangle processor and explain the steps I take. For these videos, I didn't use the mod 'Wood Harvester Controls,' but when I do use it, the only settings I use are Rotator mode - Physical and Saw mode - Manual Cut. Other than that, the rest is as the base game intended. 😁
What length were you cutting them? Appreciate the walk thru on this. I get tired of farming then I go to try forestry and than quit cause I get frustrated but now I’m more eager to give it another shot with the tutorial you put together.
They were cut into 5-meter logs. 😄 I'm glad you are eager to give forestry another shot! 😁🌲
thats Art-Work.... damn i need Ages to do that .... take a Bow ! always liked AND subscribed. Are you a DIGGER-Operator in real Life ?? ;-)
Thanks! It is a time-consuming process. 😄 Unfortunately, no. I have no real-world experience in heavy machinery, but I do know how to drive a truck. 😅
Llevo 2 años en farming, y estoy a años luz de cargar y cortar árboles como tu 😮
Informative video!
what forwarder do you recomend for 6m logs?
also are you gonna make a guide Platinum forestry too?
Thanks! 😁
For 6m logs, you can use either the Ponsse or Rottne forwarder. I personally prefer the Rottne as its grapple feels stronger compared to the Ponsse.
I will if enough people find this video helpful. 😄
man you can tell you do this a lot or you are used to using equipment in real life. you're awesome. I'm still trying to get all the controls down. definitely takes getting used to. Do you prefer the in game equipment or the FDR mod equipment? I really like the buncher with FDR but i feel like the processor head always acts very weird and fidgety to me. I also can seem to find a keybind to put on my joystick to actually cut the logs to length. I have to reach up and hit "x" on the keyboard every time which annoys me while trying to do everything via the joysticks. Any advice on that?
I just do it a lot. 😅 I have to admit that for FS22, I haven't really used FDR's equipment much. My latest video was actually my first time running his Buncher in FS22. I did, however, use a Highcab of his before the Platinum Edition was released. But with the new weight changes to his mods, they feel quite good.
Have you mapped 'Tool Function 2' (I think it is) to the button you want to use for processing? 😄
@@Bambis_GamerHut i finally figured it out haha keep up the vids I enjoy watching them for chill content!
Thanks and i would also like to see a platinum dlc guide :)
I keep that in mind! 😁
Great video keep it up❤
Thank you!! ♥️
Hello man great job
I have a question for you , you play with joysticks or CS ?
Ty! I play with joysticks - Dual Thrustmaster T.16000m 😄
Very nice gameplay
Donno about other ppl, but i am using the same harvester, and many of the trees i cut down fall the wrong way. they flip back over the head.
Hehe, yes, that happens now and then. 😄 Be careful not to force the header into the tree when cutting. Also, use the swing of your boom arm to help guide the fall if needed. 😁
@@Bambis_GamerHut I hope you dont mind me asking a few more questions. I really like Holmkråka, and i want to make it work but the damn trees makes it so difficult at times. I have managed to get a good production going with the old/huge spruce trees. I did find the Rottne forwarder was the only one who could manage the weight of the logs. Now i wanted to practice your harvester technique on the smaller/younger spruce trees, but they driving me insane (I thought it would be much easier to handle them). I am using you setup here, one with a flexbunk forwarder. I have several challenges. First off, if i drive my 24t harvester over a small cut log my mistake, the whole harvester could end of shaking. Second, trying to pick up the smaller logs are a nightmare, the grapple wont cover them very well, so they just split and try to slide out. Third, when i do get them into the bunk, they just slide around everywhere, I know i must use the belts, but come on game. Fourth, unloading, filling my grapple full just makes the whole harvester shake until logs are flying off the grapple. Are these common problems? Thanks.
Ah yes, the young trees. 😅 Yes, they will tease you now and then, that's for sure. I cut down a bunch in the very first Holmåkra episode. Even with the mod Wood Harvester Controls, some of the trees seemed to have a life of their own, hehe. What helped me was using WHC and then slowly activating the rollers to guide the fall of the trees.
You always want to avoid driving over stumps and logs as this will make any machinery jumpy.
I agree that small logs can be a nightmare. More often than not, I actually leave them to be grinded when I go in to remove the stumps anyway. This also helps with stability both when loading forwarders and making piles of logs. (Plus, those small pieces really don't add any profit.)
Straps are 100% needed when forwarding, the logs will slide and move around. Unfortunately, nothing can be done to prevent that, unless you only load up large logs, like the first 10-15 meters of a tree.
Last but not least, don't grab too many trees at a time. If you grab too many, you will experience crane shaking as you describe. It's better to just grab what is comfortable and then do it a few more times, rather than having to spend time cleaning up all the logs exploding out of the grapple.
So yes, unfortunately, these are all common problems, but you can avoid them or mitigate them using the tips above.
I hope it make sense! And feel free to question me any time. 😁😄
What a great vid. How did you do the 3rd person views?
Thanks! The 3rd person view is another player I use as a camera. 😄
Karhuvaara map mentioned! Finland mentioned! Torille :D
I think the right response is, Kiitos! 😅😁
Hello, watching your videos makes you want to do forestry so much, but every time I try, it's too hard to control the equipment (harvester, loader...). I play with a G920 and the logitech farming panel. I understand that you use T.16000M joysticks, is it easy to use? And could you make a video on "how to set them up"?
Thanks for the quality of the videos!
Yeah, I think it's much easier compared to using a mouse and keyboard! But it's still something you need to get used to, unless you're familiar with operating joysticks from real-life machinery. Setup-wise, they are exactly like the farming panel, plug and play. You simply just connect the USB, and then they work. You might have to change some bindings to your own liking, but yeah. 😄
On my Discord, you can find my keybindings under the pinned messages in the FS22 media channel. 😁
how do you get the trees to not turn while cutting them into piles
I try to guide the fall with the crane arm and by positioning the processor head correctly. Sometimes, it happens that the tree will still turn a little while cutting it into logs. When this happens, I try to use the environment to guide it back in place. 😄
Лайк на месте дружище
Thank you very much! 😄
If i only have one joystick (t16000m ) is it better ro play with or without easy arm control?what do you think?
Yeah, I would use easy arm control, especially when operating tree harvesters. 😄 But I'm not sure it makes a world of difference for forwarders and wood cranes though.
Setup?
Logitech g29 steering wheel and Dual Thrustmaster T.16000M joysticks. 😁
Welcome to FINLAND 🇫🇮
🇫🇮👋
❤
🤗
Yo wsp, love fs22, i play with the ponsse scorpion king and then forwarder ponsse elephant king and when i use forwarder the trees lag very much like when i take 2-3 trees they all go wobbly and shit. tips?
I think it's due to the amount of weight in the grapple. The Ponsse feels a bit underpowered compared to the Komatsu or even the Rottne forwarder in this regard. Other than that, there is not much to be done about it, other than only picking up what the grapple is comfortable with. 😄
@@Bambis_GamerHut yeah i usually just pick up 2-3 trees
How are you loading them so smooth 😮
😄 Lots of hours practicing!
a controls vid maybe?
I've posted a picture of my controls on Discord (link in description). You can find it in the pinned messages in the media channel. 😁 But it's basically ISO controls for excavators. 😄
Would like to see a yarder on hillside to landing operation
Noted. It's also one of my favorite setups, ever since the yarder released with the Platinum DLC!😁
thanks
You're welcome! 😁
En exbox donde puedo conseguir los yoitiks?😢
I'm actually not sure if it's available for consoles. 😔
Hello, I would like to plant trees. Do you have any tree recommendations?
I personally think the best two tree types are Spruce and Lodgepole Pine from the Platinum DLC. Now, I don't know if these are the best trees in terms of profitability, but they are easy to handle with machinery. 😄
Also, if you're planting trees for harvest, make sure you only plant conifer trees. Otherwise, you're going to spend a lot of time with the chainsaw. 😅
How do you operate the crane???
Mouse, controler, joysticks
I use the dual Thrustmaster T.16000M joysticks. 😁
is this joystick competable with ps4???
thx
No, i don't think so unfortunately. 😔
Setting joystick plis
You can find my joystick settings on my Discord server, in the media channel's pinned messages! 😁
how do you not use the Extension on the forwaeder??
It's because I turned off Easy Arm controls in the menu. Normally, I control it manually myself. However, I don't like to do it when recording. 😅
ok thx awesome video love your content@@Bambis_GamerHut
Thank you very much, I really appreciate it! 😄
also can you do a setap tour it would be nice to see it
I'm not sure I could handle the roast if I showed off my current setup. 🤣
ok do you use joysticks??@@Bambis_GamerHut
Yea, I use dual Thrustmaster T.16000M. 😁
nice me to😀@@Bambis_GamerHut
What is the Map please?
It's Karhuvaara and can be found on the official modhub! 😁
Have jou joysticks
Yea, i play with dual Thrustmaster T.16000m. 😁
yes, me too. Can you please show your settings?
Check my Discord in description. 😄 In the FS22 media tab there is a pinned message with my joystick settings.
@@Bambis_GamerHut thx
can you make more I need to learn how to log better
I will look into it if people seem interested! 😁 Anything specific you have in mind?
@@Bambis_GamerHut like how to load logs and unload them. I'm on controller so it may be a bit harder
Map name?
Thank you, karhuvaara. If I purchase Logitech cheap joystick, it's ok perfect?
I think the cheapest joystick is the Logitech Extreme3D, which is perfectly fine. I used two of those for a long time before switching to the dual Thrustmaster.😁