Ed I’ve wanted to know exactly how to form walls the traditional method for several years. You explained this exceptionally well. Your experience and communicative skills are admirable. Thanks so much for explaining this in detail.
Ed, that was one of the best tutorials I've watched. You have a very clear and concise delivery which makes is easy to follow and understand the content. Thanks for making this available.
After looking and looking and looking, finally I came across this video. Thank you so much. I will be busy this summer building a 6’ tall by 10’ long and 8” wide retaining wall. Thanks again
Great video. You were really informative and went through not only the proper names but what the hardware is known as in the field. Thanks for the upload.
Researching Symons panels and came across this and was rather impressed by how well this was done. I learned about alternative means which will assist greatly in my research.
This is one of the best videos I've seen on this topic. We're building an off-grid house on our property in Mexico, and I've been doing research on how to build these forms. Much appreciated!
Mr. Stanley, Thank you for a great instructional video. I have been interested in learning how to properly build concrete forms. I look forward to watching your future videos about construction of concrete forms. I appreciate your sharing knowledge of construction in this video.
Agreed, THE BEST VIDEO explaining this concept. What a great communicator! You knocked this out of the park, it’s cleared up every question I had in this type of forming.
Excellent tutorial, Ed. Thank you for taking the time to explain so clearly and thoroughly. We could use more experienced trainers like yourself these days!
The extraordinary Vid, i really got hot to this content of video. I really appreciated, this kind of vid is what i have been looking for during this time coz it will help me at jobsite sometime. Thanks
Excellent video. I spent a few years in concrete forming and this covers a lot of the basic stuff we used day in and day out. Great demonstration to. I find most guys learn visually in the field seeing this stuff set up and you demonstrated it well (minus the mud and colourful language I’m used to lol).
Very informative video, but I'd like to add that it might be better to use 4x4 and 2x4 for your uprights/strongbacks since it would allow the wedges to cover more surface area instead of sticking out 2 inches on either side. Also, the ends of the snap ties are nearly maxed out on the wedge and might not hold up against the pressure of concrete.
Only thing I see that I think matters is plumbing the wall from the face, instead of the wailers. You could push the 2x4 turnbuckle to push against the plywood while nailing to the strong back for additional support but the leveling is the main one for me lol. Love the video though! Very informational.
This was in my recommended so I had to click. LOCAL 157 NYC CARPENTER AND PROUD OF IT TOO WORKED MY BUT OFF TO GET TO WHERE IM AT TODAY- Chris Alvarez 💪🏻
How to set out or mark out t cone of snap tie so that all the snap tie that we install/applied would be the same in size or position? So it looks good.🙏
As a concrete finisher in the union I went through a 4-year apprenticeship program and working on the jobs with the Carpenters I became a carpenter and I was a part of 2375 before they change to what they are now in Southern California and let me tell you you're going through a for your apprenticeship program pays off you learn a lot more detail I believe and you punish it program then you do working for somebody that doesn't do that
THANK YOU....THANK YOU....THANK YOU......ON YOUR 2X4 VERTICLE STRONG BACKS.....YOU DID NOT PUT 16 PENNY NAILS IN THE 2 2X4S TO JOIN THEM TOGETHER WITH THE SNAP TIE ROD IN THE MIDDLE......ALSO IF YOU ARE NOT USING THE METAL CORNER BRACKET.......ONE 2X4 COMES IN THE CORNER UNDER THE TIE ROD....THEN THE OTHER 2X4 COMES IN ABOVE THE ROD......BOTH ENDS ARE EXTENDED......NOW YOU CAN PUT 2 16 PENNY NAILS DIRECTLY AT THE OUTSIDE CORNER OF THE PLYWOOD.......NOW FINISH THE OUTSIDE CORNER FORM WITH STANDARD LOG CABIN STYLE.....I WAS A UNION CARPENTER 50 YEARS
We need all those stuff you mentioned if we are planning to be builders/contractors who have another project to me or planning to be professional builders.
I never nail the hair pins and I make sure none of the guys I’m working with does either, it’s way more tedious to strip? I just put a 16d nail at the top and bottom of the strong backs and a vibrator will never shake that apart
Let's say I would have to build a form withouy engineering specifications. How do I choose if I want to go single waler or double? Also, are there rules of thumb for the center center spacing of the 2x4. Thanks.
A first rate tutorial. I've looked at my share of videos to learn what I need to build forms for a retaining wall. Yours is crisp and clear and explains the (confusing to a newbie...) terminology. One question: is OSB OK for form walls? Assume so but you don't mention that detail. A++
This video was for Ed to show just the hardware used for the wall forming project. If he makes another video I'll have him show how he does his projects from start to finish.
It would have been nice to see the entire process from the placing of the wafer board upright, through to the bracing. you don't get a sense of how you initially start
1: layout walls both sides 2: secure 2x4 to outside wall lines including ply thickness to the wall, every 4' 3: start in corner with ply plumb up corner both ways(use wedge if needed to keep in place out side of wall) 4: nail corner to 2x4 then nail end of ply when plumb 5: next ply toenail top to old ply plumb up end and nail bottom 6: temp brace after 8' to not let it fall over, layout holes 2' x2' usually starting 1' up 1' over 7: inside corner holes on outside form wall thickness +9" (for hardware ) drill holes 8: work from corners to center of wall length cut 1 filler ply to finish wall form 9: put in ties, walers, and clamps overlapping waler ends to be a continuous waler
Good video. The only part I may disagree with is the way you placed the turnbuckle. Also at 17:09 we call those after a women’s genitalia out in the field
Better than any apprenticeship instructor I had
Very informative - thank you! Your technique of repeating HW names makes all of us memorizing them by the end of the video :)
Ed I’ve wanted to know exactly how to form walls the traditional method for several years. You explained this exceptionally well. Your experience and communicative skills are admirable. Thanks so much for explaining this in detail.
Im. Forming 6" wall 40" tall it being poured im 35 'at a time with 2 coners. On a 8"×8 foundations. Also 133 feet long. What bid would thT be.
Good one Ed. A piece of really handy information displayed here. Thanks
EXCELLENT VIDEO. This is the best video I have seen. Thank you for taking the time to make this education video.
A great presentation Mr Stanley, thankyou very much.
Most informative video I have found so far on explaining foundation wall framing. Thank you for making this video!
This is my goto video for new carpenter's in the field
The kind of perfection that concrete demands
Please make more
That was nothing short of OUTSTANDING!!! The one thumbs down must be from one of Ed's competitors!!!???
Ed, that was one of the best tutorials I've watched. You have a very clear and concise delivery which makes is easy to follow and understand the content. Thanks for making this available.
I’m a 2nd year apprentice local 279.. & this was very informative straight to the point, explaining everything that we need to know thanks brother
After looking and looking and looking, finally I came across this video. Thank you so much. I will be busy this summer building a 6’ tall by 10’ long and 8” wide retaining wall. Thanks again
Great video. You were really informative and went through not only the proper names but what the hardware is known as in the field. Thanks for the upload.
Researching Symons panels and came across this and was rather impressed by how well this was done. I learned about alternative means which will assist greatly in my research.
This is one of the best videos I've seen on this topic. We're building an off-grid house on our property in Mexico, and I've been doing research on how to build these forms. Much appreciated!
Mr. Stanley, Thank you for a great instructional video. I have been interested in learning how to properly build concrete forms. I look forward to watching your future videos about construction of concrete forms. I appreciate your sharing knowledge of construction in this video.
Thanks man alota guys go in knowing nothing i send them here cause this is the best ive seen yet you sir are now a legend.
Agreed, THE BEST VIDEO explaining this concept. What a great communicator! You knocked this out of the park, it’s cleared up every question I had in this type of forming.
Awesome job Ed, thank you. This is valuable information for all of us DIY guys pouring concrete on the weekends. Union Strong!
You’re the best Ed. Much love and respect ✊🏻
Gives me the confidence to build my own forms. Thanks so much..
Excellent tutorial, Ed. Thank you for taking the time to explain so clearly and thoroughly. We could use more experienced trainers like yourself these days!
Best video I’ve seen! Very helpful explains and shows you, now I know the actual name of the tools lol
Good video. Explained very well and straight to the point. Also around 17:10; we call them “panochas”😂
Excellent video, great use of terminology, very clear. good job
Thanks for the video people don’t throw this information out just anywhere
The extraordinary Vid, i really got hot to this content of video. I really appreciated, this kind of vid is what i have been looking for during this time coz it will help me at jobsite sometime. Thanks
Thank you Ed Stanley.
Excellent video. I spent a few years in concrete forming and this covers a lot of the basic stuff we used day in and day out. Great demonstration to. I find most guys learn visually in the field seeing this stuff set up and you demonstrated it well (minus the mud and colourful language I’m used to lol).
Thanks Mr Stanley good day of school
Ed is a great teacher 👍👍
I remember taking these required classes back in the day. Bridge forming certification was cool too.
Hell yeah bro..thanks for the cletcha..local 213 Concrete city...
Love what im learning..love what I joined 🔨.
Very informative video, but I'd like to add that it might be better to use 4x4 and 2x4 for your uprights/strongbacks since it would allow the wedges to cover more surface area instead of sticking out 2 inches on either side. Also, the ends of the snap ties are nearly maxed out on the wedge and might not hold up against the pressure of concrete.
Only thing I see that I think matters is plumbing the wall from the face, instead of the wailers. You could push the 2x4 turnbuckle to push against the plywood while nailing to the strong back for additional support but the leveling is the main one for me lol. Love the video though! Very informational.
Good work
Great video! Very informative. Wish you had more, taking it further like adding in another section for a 50' retainer wall.
This was in my recommended so I had to click. LOCAL 157 NYC CARPENTER AND PROUD OF IT TOO WORKED MY BUT OFF TO GET TO WHERE IM AT TODAY- Chris Alvarez 💪🏻
How to set out or mark out t cone of snap tie so that all the snap tie that we install/applied would be the same in size or position? So it looks good.🙏
As a concrete finisher in the union I went through a 4-year apprenticeship program and working on the jobs with the Carpenters I became a carpenter and I was a part of 2375 before they change to what they are now in Southern California and let me tell you you're going through a for your apprenticeship program pays off you learn a lot more detail I believe and you punish it program then you do working for somebody that doesn't do that
THANK YOU....THANK YOU....THANK YOU......ON YOUR 2X4 VERTICLE STRONG BACKS.....YOU DID NOT PUT 16 PENNY NAILS IN THE 2 2X4S TO JOIN THEM TOGETHER WITH THE SNAP TIE ROD IN THE MIDDLE......ALSO IF YOU ARE NOT USING THE METAL CORNER BRACKET.......ONE 2X4 COMES IN THE CORNER UNDER THE TIE ROD....THEN THE OTHER 2X4 COMES IN ABOVE THE ROD......BOTH ENDS ARE EXTENDED......NOW YOU CAN PUT 2 16 PENNY NAILS DIRECTLY AT THE OUTSIDE CORNER OF THE PLYWOOD.......NOW FINISH THE OUTSIDE CORNER FORM WITH STANDARD LOG CABIN STYLE.....I WAS A UNION CARPENTER 50 YEARS
We need all those stuff you mentioned if we are planning to be builders/contractors who have another project to me or planning to be professional builders.
OUTSTANDING VIDEO!!!!! OUTSTANDING
Right on brother, from the your brother 1503 concrete carpenter
VERY GOOD job on your video.
Excellent video learned alot from you.
Thanks Ed. Much appreciated
Would like to know more about panel construction. Good video, thanks
I never nail the hair pins and I make sure none of the guys I’m working with does either, it’s way more tedious to strip? I just put a 16d nail at the top and bottom of the strong backs and a vibrator will never shake that apart
Wonderful! Nothing less.
Thanks for the info! Great video!
excellent teacher.
Yes,it is a video that show an demonstrat through out the video
You’re my hero!! Thank you
I live on solid rock I want to form up a concrete wall 4 ft high and 135 ft long. What size does my footing need to be in width and thickness?
Great video ! Thank you
I do miss doing concrete forming - but I also don't miss doing concrete forming - retired NE IL union carpenter
Thanks sr...for education and information...
Let's say I would have to build a form withouy engineering specifications. How do I choose if I want to go single waler or double? Also, are there rules of thumb for the center center spacing of the 2x4.
Thanks.
16 inch oc for 2x4 and depends on the thickness of your plywood
The best education videos thank you very much you have a great day too
Excelente thanks sir very helpful video
We need more of these!
Nice demo!
Overall good video, hammers down. Now all we need is a smaller scale video showing how to stack sheets double wailers etc.
Excellent! Thank you
Thank you for this video.This is really useful.
5th period from 714 great job thanks for the video
A first rate tutorial. I've looked at my share of videos to learn what I need to build forms for a retaining wall. Yours is crisp and clear and explains the (confusing to a newbie...) terminology.
One question: is OSB OK for form walls? Assume so but you don't mention that detail.
A++
Thank you so much! Very need all carpenters experience
very useful info, thank you Sir
Is OSB sufficient for a one time use or do you recommend plywood?
How do you secure turnbuckle to the floor on concrete foundation?
Tapcon or better concrete fasteners, no remset type because of damage to a finiched floor
When he said other names that cant be mention for a hair tie i lol that
This video was for Ed to show just the hardware used for the wall forming project. If he makes another video I'll have him show how he does his projects from start to finish.
Thanks! Really informative. Great video!
Would really appreciate it. This was really good man!
How tall of a wall can you form with plywood and what is the minimum plywood thickness needed?
Thank you you helped me alot🙏
I noticed your using OSB. Is that for demo only or can osb be used to form and pour. I ask because osb is more affordable.
It would have been nice to see the entire process from the placing of the wafer board upright, through to the bracing. you don't get a sense of how you initially start
1: layout walls both sides
2: secure 2x4 to outside wall lines including ply thickness to the wall, every 4'
3: start in corner with ply plumb up corner both ways(use wedge if needed to keep in place out side of wall)
4: nail corner to 2x4 then nail end of ply when plumb
5: next ply toenail top to old ply plumb up end and nail bottom
6: temp brace after 8' to not let it fall over, layout holes 2' x2' usually starting 1' up 1' over
7: inside corner holes on outside form wall thickness +9" (for hardware ) drill holes
8: work from corners to center of wall length cut 1 filler ply to finish wall form
9: put in ties, walers, and clamps overlapping waler ends to be a continuous waler
good job Eric@@ericbeder1419
All i can hear is Adam Sandler waterboy!! Correct me if I'm wrong but thats a sweet louisiana accent
In the real world, the floor isnt made of wood. I usually put the turn buckle at the top and a stake in the ground. #1207
Always learning!
Thanks, Ed!
Good video. The only part I may disagree with is the way you placed the turnbuckle. Also at 17:09 we call those after a women’s genitalia out in the field
nothing beats union made
Why not nail the turnbuckle head into the strong back so you can adjust it and look at the level at the same time
Too close to the vibrator , could come loose,
Where can I find this guys Chanel ?
Muy bueno!!!! Thank You.
This guy needs his own channel teaching
I loved everything except that hammer
Interesting what the name of the hairpin on the field is?
With today’s lumber prices this system becomes quite expensive. I ended up renting steel ply forms instead and saved money and whole lot of time
this is great, thank you sir
Thank you for the video sir! Is that the ontario training center? That’s where I did my apprenticeship school.
Can you reuse the osb for other concrete jobs or is that one use and done?
osb only used in a training center, Evans 107 or better,
whats the spacing for strongback?
Thanks Ed
can we use that plywood instead of metal form for concrete pour.?
Aluminum for metal form. And there is also a form made in plastic
FYI 2x2 tie layout doesn't work anymore after ACI flyash rule. . .better get that sucker calced out
Can the corner look used on the inside face of the form
Awesomeness what’s going on