3u battery health flash with tag on flex installed does not restore battery health displayed on device to 100% still says old BH for 13PM already on 17.4.1. Using tag on flex which comes with Ampsentrix core battery Have seen info indicating 17.4.1 patched workarounds in 17.4. Any update to this video which works for 17.4.1. And will any workaround work with 15 series
Ok, I just do it the procedure but you need to have the tag on flex connect, then use 3u tools theres should be to appers 100% , make a "Quick Flash" also check the box on the sub menu of Quick flash to mark the option of Fix battery health I use ios 17.6.1, wait the the time to flash the phone obviously this clear all your data so be sure to make a backup first off all, and thats all when the flash end you can check the Battery Health fix
@@cesarmoreno576 i did exactly that on my iPhone 11, but ist shows my old health. I used an StellarXCell though I only see people saying Apple fixed it in 17.6/17.5. Is that true?
@@cesarmoreno576 i did that but it didnt help I always see people saying apple patched this in their update. Is that true? I use a StellarXCell though Maybe disconnect the old bms?
It's the same for me. I welded the BMS board to the new battery, I flushed it through 3utools, The battery condition is still the same (80%) Do you have similar symptoms to mine?
When calibrating a battery using a JC Programmer, you can set the battery health and cycle count to any number you want (e.g If I replaced my phone battery with a genuine apple battery from another iphone that I knew had a battery health of 94% and Cycle count 350, I would programme the new battery with these numbers after BMS transfer and the the health in settings would show 94%. But regardless of how I programme the tag on flex, Flashing the iphone with 3u tools always sets the health to 100%. Is there a way to flash the phone so shows the battery health and cycle count I put in?
Hi, I did as you wrote.. the battery health now does not want to show, the error message does not write, nor the service as before, but when I click on the battery health so it just loads, but does not show..
@@MobileSentrixso I’m confused - if I order a battery from you guys what do I need to make it work and be able to check health. I don’t know why this is so confusing and no company can lay it out in simple terms on there website. Do I still need the tag on , do I need some type of programmed or do I still need to spot weld the old BMS onto the new battery?
couldn't you downgrade the phone to an older iOS, install the new battery and the upgrade the OS? Wouldn't that work? I'm pretty sure you can do that just using iTunes
A lot of work for something that use to be so quick & simple.
3u battery health flash with tag on flex installed does not restore battery health displayed on device to 100% still says old BH for 13PM already on 17.4.1. Using tag on flex which comes with Ampsentrix core battery
Have seen info indicating 17.4.1 patched workarounds in 17.4. Any update to this video which works for 17.4.1. And will any workaround work with 15 series
Any updates?
mm flash with retain user data wont work??
Ok, I just do it the procedure but you need to have the tag on flex connect, then use 3u tools theres should be to appers 100% , make a "Quick Flash" also check the box on the sub menu of Quick flash to mark the option of Fix battery health I use ios 17.6.1, wait the the time to flash the phone obviously this clear all your data so be sure to make a backup first off all, and thats all when the flash end you can check the Battery Health fix
then you can disconnect the tag on flex without problems first turn off the phone
@@cesarmoreno576 so it did work on 17.6.1 for you?
@@manu-zb yeah but you need to flash the phone using 3u tools and mark the check box with “fix battery bug” and that’s all
@@cesarmoreno576 i did exactly that on my iPhone 11, but ist shows my old health.
I used an StellarXCell though
I only see people saying Apple fixed it in 17.6/17.5. Is that true?
@@cesarmoreno576 i did that but it didnt help
I always see people saying apple patched this in their update. Is that true?
I use a StellarXCell though
Maybe disconnect the old bms?
i have trypophobia by looking at your background panels. offtopic btw
Unbelievable apple
Does not seem to work for iOS 17.4.1 or newer. Did you find a solution?
It's the same for me.
I welded the BMS board to the new battery,
I flushed it through 3utools,
The battery condition is still the same (80%)
Do you have similar symptoms to mine?
Any update?
When calibrating a battery using a JC Programmer, you can set the battery health and cycle count to any number you want (e.g If I replaced my phone battery with a genuine apple battery from another iphone that I knew had a battery health of 94% and Cycle count 350, I would programme the new battery with these numbers after BMS transfer and the the health in settings would show 94%. But regardless of how I programme the tag on flex, Flashing the iphone with 3u tools always sets the health to 100%. Is there a way to flash the phone so shows the battery health and cycle count I put in?
Hi, I did as you wrote.. the battery health now does not want to show, the error message does not write, nor the service as before, but when I click on the battery health so it just loads, but does not show..
is this still a thing on iOS 17.5.1?
yes, but it will require a flash with 3uTools or iTunes after
@@MobileSentrixso I’m confused - if I order a battery from you guys what do I need to make it work and be able to check health. I don’t know why this is so confusing and no company can lay it out in simple terms on there website. Do I still need the tag on , do I need some type of programmed or do I still need to spot weld the old BMS onto the new battery?
A what step so you flash?
Injuredgadgets has xcap bms. What do you have that's similar?
Yes they do , but are they having the same issue?
@wolverine3172002 no? It has a built in tag on that rewrites it. Prompt boot with lightning cable?
couldn't you downgrade the phone to an older iOS, install the new battery and the upgrade the OS? Wouldn't that work? I'm pretty sure you can do that just using iTunes
old softwares are not signed and wont work
@@donevangravelle there are ways to use unsigned software. I haven't figured out how but I know it's possible. Wouldn't that do the trick?
You can't downgrade