DIY Synth #37 -- GranulArduino -- A simple granular synth using an Arduino Nano

Поділитися
Вставка
  • Опубліковано 16 гру 2024

КОМЕНТАРІ • 69

  • @dillipphunbar7924
    @dillipphunbar7924 6 місяців тому +2

    Impressive. I bought a nano to do something similar (sampler), but I haven't a clue where to start except follow other people's projects. You are obviously far more accomplished and the result sounds really good.

    • @benjiaomodular
      @benjiaomodular  4 місяці тому +1

      Thanks! I'm sure you can do it! I was about a year into learning electronics when I made this video. :D

  • @telegraph_hill
    @telegraph_hill 2 роки тому +5

    nice! great technique to save time with front panel design. awesome.

    • @benjiaomodular
      @benjiaomodular  2 роки тому +1

      Thanks! My laziness finds it's way, i guess. 😂

  • @sandrainthesky1011
    @sandrainthesky1011 Місяць тому +1

    Very old school love it!

  • @i_never_asked_for_an_alias
    @i_never_asked_for_an_alias Рік тому +2

    Lovely. It's like the first words from a newborn. ;-)

  • @stevesmachineempire
    @stevesmachineempire Місяць тому +1

    Nice wiring job.

  • @sparkmusic734
    @sparkmusic734 2 роки тому +2

    This sounds really good! Hope to see more of these in the future! Great video

  • @channelite
    @channelite 2 роки тому +1

    cool jam! I really enjoyed it.

  • @NotesAndVolts
    @NotesAndVolts Рік тому +2

    Amazing!

    • @benjiaomodular
      @benjiaomodular  Рік тому

      Heyyy thanks for doing your videos! Your stuff helped me a lot when I was getting started with synthdiy. 🙏

  • @garaughty
    @garaughty 2 роки тому +1

    Seriously brilliant work on this Benjie !

  • @LockStoppageSandwich
    @LockStoppageSandwich 2 роки тому +2

    Looks and sounds superb 👍GREAT job

  • @SpectrumDIY
    @SpectrumDIY 2 роки тому +1

    That turned out really nice dude!

    • @benjiaomodular
      @benjiaomodular  2 роки тому +1

      Thanks! 🙏

    • @SpectrumDIY
      @SpectrumDIY 2 роки тому

      @@benjiaomodular synth tour soon? 😁😁

    • @benjiaomodular
      @benjiaomodular  2 роки тому +1

      @@SpectrumDIY I'm afraid it might take a while. I just took down the big synth. 😅
      instagram.com/p/CbvBrelIDac/

    • @SpectrumDIY
      @SpectrumDIY 2 роки тому +1

      @@benjiaomodular OMG 😳😳😱

    • @benjiaomodular
      @benjiaomodular  2 роки тому +1

      @@SpectrumDIY haha! Not quitting though, just reorganizing. 😅

  • @Sarahbuildsstepsequencers
    @Sarahbuildsstepsequencers 2 роки тому +1

    Great work! Sounds great!

  • @draconianrhythms
    @draconianrhythms 2 роки тому +1

    Bravo .. this is awesome 👏

  • @jonkruth4157
    @jonkruth4157 Рік тому +1

    woow ..very very cool

  • @runescaper1333
    @runescaper1333 2 роки тому

    Astig! buti nakita ko tong channel mo 🙌

  • @5rockbolt
    @5rockbolt 2 роки тому +7

    wow!!! nice sound. Are you by any chance going to make the code and schematics available, please? I really would like to build one for myself. Thank you and VERY WELL DONE!!!!! :)

    • @benjiaomodular
      @benjiaomodular  2 роки тому +5

      Thanks! Everything's on my website: benjiaomodular.com/post/2022-03-31-granularduino/.
      It does have a sweet spot though. Some settings don't sound that great. 😅

  • @pauls0131
    @pauls0131 Рік тому +3

    Hi Benji,
    First off, let me say thank you for posting your builds online, and especially for offering the files and BOM’s as well. Very generous!
    Wanted to ask about the soundtrack of the video you made for the GranulArduino. Was this all recorded from the GranulArduino? And if so, how did you process it? Clearly reverb, but anything else? It sounds great!
    And you are using a sequencer?
    It wasn’t clear to me how the two oscillators interact, the timbre of the sound does vary (and sounds great) but I can’t really tell if there are two separate voices or if one voice modulates the other?
    Anyway, I am teaching myself building electronic stuff as well, and this looks like a great project with a very rewarding result!
    Am very interested in your idea of a sample playback device, have you developed this idea any more?

    • @benjiaomodular
      @benjiaomodular  Рік тому +1

      You're welcome! Always happy to share everything I do as open-source.
      It's been a while since i recorded this, so I'll do my best to recall what i used. I'm pretty sure the Delay is from a delay pedal that I made which would later become my MiniDelay module: benjiaomodular.com/post/2022-09-11-mini-delay/. The reverb was probably my Boss RV-6.
      The sequencer I used is the Korg SQ-1, you should be able to see it in action at 6:36.
      I believe it's just two waves that are sampled and blended together really fast. You can read more about it in the reference that I used: code.google.com/archive/p/tinkerit/wikis/Auduino.wiki. I'm also pretty new to this so forgive my ignorance. 😅
      A much better sampler is still on the list but unfortunately, I haven't gotten to it yet! But it will probably involve a Daisy Seed.
      Apologies for the very late reply. If you're interested, I run a Discord server with other SynthDIY friends. You can catch me there, or ask from help from other DIYers in case i miss it again. discord.gg/3BCqysyJdQ

    • @benjiaomodular
      @benjiaomodular  Рік тому

      @CycloidalHeadache heh. i try! thanks man

  • @TheScreamingFrog916
    @TheScreamingFrog916 Рік тому +4

    Thanks for your contribution to the Granular Synth community 🎶🌎☮❤
    I don't have the skills, but would be great if someone could turn this into a PCB file with gerber files, so we could send out to have PCB made. Maybe do a batch purchase.
    Best wishes for your continued success 🔥

    • @benjiaomodular
      @benjiaomodular  Рік тому +1

      Hey, thanks for reaching out! Maybe not for this exact circuit, but I do have plans to design a better granular synth pcb in the future. 😊

  • @dtharmo
    @dtharmo 2 роки тому +1

    Great job for a nice toy !
    Just a simple silly question, the leds you added are directly from pins 2, 4, 9 & 12 through resistors ?

    • @benjiaomodular
      @benjiaomodular  2 роки тому +1

      Oops. Sorry, missed that on the schematics. Yes, 3mm leds direct to the arduino pins with 10k resistors to ground.
      Thanks for the compliment. 😊

  • @johnp3541
    @johnp3541 2 роки тому +1

    amazing m8!

  • @_vespertine
    @_vespertine 7 місяців тому

    Can i use this code without the cv inputs, with the original auduino hardware plus the extra pots?

  • @thenetware1
    @thenetware1 Рік тому +1

    Excelente adaptação. Já construi tres unidades baseadas em notes and volts e fiquei feliz em encontrar a sua versão CV. É possível não utilizar o ADC e ter algum bom resultado? No Brasil é dificil encontrar esse componente e a exportação fica ridículamente cara por causa do frete e impostos. Agradeço se puder me ajudar com essa questão. Boa sorte e sucesso.

    • @benjiaomodular
      @benjiaomodular  Рік тому +1

      Thank you! I'm glad you like it. I have not tried it without the ADC, but HAGIWO's Arduino projects (note.com/solder_state/n/n88317851a4c7) don't use them either, so it will probably work. Let me know if it does!

    • @thenetware1
      @thenetware1 Рік тому +1

      @@benjiaomodular Obrigado pelo feedback, assim que eu finalizar poto o resutado aqui. Saudações do Brasil

    • @benjiaomodular
      @benjiaomodular  Рік тому

      @@thenetware1 No problem! Good luck. Cheers from the Philippines. 👋

  • @artekworkshop9243
    @artekworkshop9243 Рік тому +1

    Is it possible to play it alone without any other modular staf?

    • @benjiaomodular
      @benjiaomodular  Рік тому +1

      Yup! Since it's a sound source, you can play with it on its own. It's nice if you have effects pedals too, like reverb or delay

  • @23Gears
    @23Gears 2 роки тому +2

    This seems like a fantastic project Benjie, but I'm not sure I understand what a granular module does in a modular synth setup. Does it use a sampled sound and take grains from that, or is it sampling grains from a VCO as input? What is actually happening "under the hood"?
    What I do know, is that I would like to make one 😆

    • @benjiaomodular
      @benjiaomodular  2 роки тому +5

      Thanks, Stephen! This one actually uses two built in triangle waves that are chopped up and mixed. I can't take any credit for it though. I got the code from the Auduino project:
      - code.google.com/archive/p/tinkerit/wikis/Auduino.wiki
      - code.google.com/archive/p/tinkerit/downloads
      I would love to make a more advanced version later, where you can load sample files (wav/mp3) -- as you've described.
      Good luck with your build!

  • @frankyfanclub
    @frankyfanclub 2 роки тому +1

    wow

  • @MaxUgly
    @MaxUgly 2 роки тому +1

    I want to take waveforms from data, like a big spreadsheet of some data unrelated to audio but it naturally oscillates over some point. Make that point zero, stretch it horizontally to make it make sound and play it back... Any idea how to make this happen? I have been trying to learn some python and PCM stuff and am decent at Excel, just can't seem to put it all together. Kinda rage quit a few months ago...

    • @benjiaomodular
      @benjiaomodular  2 роки тому +1

      That's interesting. Have you checked out this project? I haven't tried it, but you should be able to drop in your data as a replacement for the screen input.
      diyelectromusic.wordpress.com/2021/08/09/arduino-touchscreen-pwm-sound-output/
      You'll probably have to scale your dataset. Set a min and max and then stretch the values to a standard range (eg. 0-1023).

    • @MaxUgly
      @MaxUgly 2 роки тому +1

      @@benjiaomodular Thank you sir! Looking into it now. One of my favorite artists is Hot Sugar. He goes around and records all kinds of crazy sounds including the "silence" of a room and processes it into a coherent instrument. He recently even made a jam from the first interplanetary audio from the Perseverance Mars rover. He calls it "associative music" That is my inspiration for this. I also really appreciate what you are doing with these unique circuits. The emotion from a unique instrument can be so much stronger than something familiar.

    • @benjiaomodular
      @benjiaomodular  2 роки тому

      @MaxUgly no problem. I hope you get it to work. And thanks for the nice words. 😊
      Associative music, that's a very good way to call it!
      If you're interested, I do have a data-driven module too. I used earthquake data from NOAA to produce rhythmic patterns: ua-cam.com/video/cnAANltLCPs/v-deo.html. It's also Arduino-based and I also shared the Jupyter notebook (Python scripts) I used to prepare the data.

    • @MaxUgly
      @MaxUgly 2 роки тому

      @@benjiaomodular Super interested!! Thank you! I have to go into work for four hours and then I am going to check that out and tinker with the tool. Thank you so much.

    • @benjiaomodular
      @benjiaomodular  2 роки тому

      @@MaxUgly happy to help. Have a nice day!

  • @andrewdok3595
    @andrewdok3595 5 місяців тому +2

    interesting device but I really cant understand such sound

  • @RodolfoEscobarS
    @RodolfoEscobarS Рік тому +1

    The project is fantastic but it is too frustrating not to be able to understand how it works to put it into action. Is there a tutorial or some basic reference? I apologize. Thank you.

    • @benjiaomodular
      @benjiaomodular  Рік тому

      Thanks! Not exactly a tutorial, but I have my docs on my website: benjiaomodular.com/post/2022-03-31-granularduino/
      You can also follow Notes and Volts' simpler version: www.notesandvolts.com/2014/07/build-auduino-granular-synth-part-1.html

  • @artificium_
    @artificium_ 6 місяців тому +1

    it is digital?