Hey man , i was wondering if theres an addon in blender that can make hip roof like that automatically , if there is please do review it , appreciate it man!
Nice toolset! Just a quick remark about the one that creates a complete roof structure - you basically loose your undo-redo because it uses more steps than SU can undo. So you probably wanna copy-paste the roof in a separate SU window, create the structure and copy-paste it back into your project
That Divide Edges is actually REALLY handy for me for doing lighting fixture layouts. It's like CAD "divide", or Revit's pain-in-the-... method of using dimensioning to split groups of reference planes or lines. This tool is much easier. Now you can now easily setup equal:equal spacing scenarios. Thanks for tips!
1001Bit Tools is one of my favorite extensions. I actually use both the divide along edges and the draw perpendicular line tools quite often. I think the divide alone edges tool is much better than the native divide tool in that it marks the end (or center) of each section so you don't have to hunt for them. It also gives you the option of centering an entity at the center of your edge or centering a division at the center of your edge.
Great video! As a 2D CAD user a lot of these simple tools like extending and filleting will be very handy, the grove tool looks amazing as do the stair, window and roof tools! I will install this plugin and let you know how I go on my next project. Most of these things can be done with the built in SU tools, but you need to know the tricks learned through years of trial and error, and often with a lot of extra guide lines and placeholder geometry to assist with the task at hand. Thanks again Justin.
what a nice and helpful tutorial! if i may ask, is there a way to make the strands of the screen into circular instead of the default rectangular strands? thank you!
This plugin hasnt been updated since something like 2010 and has been long abandoned! Its still always one of my first plugins (along with the similar JHS powerbar) to install because there is always the need from some random tool rare tool it has. At some point, i had the pro version of this and i lost it and always regretted not having the pro version afterwards. i never paid for it so not sure how i had it but its in the past.
Καλησπέρα!!! Σε ευχαριστώ πολυ για τα βιντεακια με βοηθάνε πάρα πολύ. Θα ήθελα την βοηθεια σου.Εχω το 2022 sketchup αλλά δεν εχω το μενού 1000bit πως μπορώ να το βρω;
@@Thesketchupessentials i just tried it on my stream sir. as long as we setting our sketchup on metric system, the plugin 1001Bit will automatically use metric system too. anyway. thanks 4 the content sir it's super helpful, eventho i still got little hard time to build the stairs so i still create the stairs for the building i build on my stream manually XDDDDD
How can I download extensions or upload my models if I'm SU 2019 user? It seems SU sales team stopped warehouses for older versions of SU to force us buy new versions.
You can download models using the free online version of SketchUp or directly from the 3D Warehouse website. Extensions can also be downloaded directly from the extension warehouse site.
Hi everyone! Want more extensions? Check out my Ultimate Guide to SketchUp Extensions here - www.theSketchUpEssentials.com/extensions
Hey man , i was wondering if theres an addon in blender that can make hip roof like that automatically , if there is please do review it , appreciate it man!
Nice toolset! Just a quick remark about the one that creates a complete roof structure - you basically loose your undo-redo because it uses more steps than SU can undo. So you probably wanna copy-paste the roof in a separate SU window, create the structure and copy-paste it back into your project
That Divide Edges is actually REALLY handy for me for doing lighting fixture layouts. It's like CAD "divide", or Revit's pain-in-the-... method of using dimensioning to split groups of reference planes or lines. This tool is much easier. Now you can now easily setup equal:equal spacing scenarios. Thanks for tips!
1001Bit Tools is one of my favorite extensions. I actually use both the divide along edges and the draw perpendicular line tools quite often. I think the divide alone edges tool is much better than the native divide tool in that it marks the end (or center) of each section so you don't have to hunt for them. It also gives you the option of centering an entity at the center of your edge or centering a division at the center of your edge.
1001 bit tools is a must have extension for me over last 6 years.
Just for the roof features alone, this extension is worth getting. Thanks!
Great video! As a 2D CAD user a lot of these simple tools like extending and filleting will be very handy, the grove tool looks amazing as do the stair, window and roof tools! I will install this plugin and let you know how I go on my next project. Most of these things can be done with the built in SU tools, but you need to know the tricks learned through years of trial and error, and often with a lot of extra guide lines and placeholder geometry to assist with the task at hand. Thanks again Justin.
Great tutorial as always, Justin! The back half of this toolset, what a time saver!!!
Yeah - there's definitely a lot of value in the second half of the extension
I only give about two video likes per year. You get one my friend! You are doing God's work here.
Lol - I'm kind of the same way - honored to get one of your likes! :)
what a nice and helpful tutorial! if i may ask, is there a way to make the strands of the screen into circular instead of the default rectangular strands? thank you!
very timely, just started to use this extension...great job!
This plugin hasnt been updated since something like 2010 and has been long abandoned! Its still always one of my first plugins (along with the similar JHS powerbar) to install because there is always the need from some random tool rare tool it has. At some point, i had the pro version of this and i lost it and always regretted not having the pro version afterwards. i never paid for it so not sure how i had it but its in the past.
Thanks for this Justin! U really single handedly saving my career right now! 😂
Thank You so much 🙏🙏
Καλησπέρα!!! Σε ευχαριστώ πολυ για τα βιντεακια με βοηθάνε πάρα πολύ. Θα ήθελα την βοηθεια σου.Εχω το 2022 sketchup αλλά δεν εχω το μενού 1000bit πως μπορώ να το βρω;
Hi, thank's for all your work ! Well it seams that 1001 bit tool pro is not available for SU 2023 MAC do you have some infos?
just curious..can the grooves go both directions vertical and horizontal?
It cannot be done with profile penetrating. What's wrong.
me too
thank you for what you're doing bro
does it also support metric system in it sir?
Haven't tried it - I assume so
@@Thesketchupessentials i just tried it on my stream sir. as long as we setting our sketchup on metric system, the plugin 1001Bit will automatically use metric system too. anyway. thanks 4 the content sir it's super helpful, eventho i still got little hard time to build the stairs so i still create the stairs for the building i build on my stream manually XDDDDD
How can I download extensions or upload my models if I'm SU 2019 user? It seems SU sales team stopped warehouses for older versions of SU to force us buy new versions.
You can download models using the free online version of SketchUp or directly from the 3D Warehouse website. Extensions can also be downloaded directly from the extension warehouse site.
hi brother can you give me a link Dibac tool
suggestion, change your into voice, its nauseating
Yeah...I'm not even sure how I would change my voice, and I like my intro :)