Is this video compatible for W211 E260 2003 V6 Engine M112?
Is it possible to clear the engine oil level sensor without letting the oil out?
If its not possible, is it safe to keep the incoming oil somewhere first and the refilling it again once we finish cleaning the sensor?
Yes.
No, you will have to drain it. If you catch it in a clean container, you can reuse it.
Thank you
Hey so my car is intermittently smoking and intermittently ticking out of my valve train it only happens if I hammer on it bring it up over 3500 RPM for a couple seconds or more then it'll start ticking like crazy and it will just pour smoke fillinh neighborhoodsI can shut my car off and leave it overnight or just tell it cools off down to below 40°, and start up tick for a second smoke a little bit and it'll all go away any idea where I need to start? LMFAO I have a few buddies and even they're not sure what's going on
Got a 2015 Merc Sprinter W906 been looking for my Oil Tempreture sensor for the past 2 days, mercedes told me on the Sump but looked till im blue in the face its not there
There is a electrical harness mount / duct, it has to be removed. Then remove the vacuum line at the vacuum pump, be sure to pump the brake pedal to discharge the vacuum system. The sensor can then be seen above the port at the vacuum pump for the main hose you previously removed. Assuming for 3.0 l engine.
Hello and thanks for the video. I have one question , this sensor does read only the level or reads also the temperature that shows in the dashboard on the lower right hand side ?
Please make a video on oil pan how to change Mercedes w203🙏
If we get a chance to perform the procedure, we will be sure to document it.
your link to the oil level sensor part takes you to the ABS sensor
With your vehicle info handy, give The Pelican Parts parts specialists a call at 1-888-280-7799. They can figure out what part or repair kit you need.
I had same problem of oil level sensor, i have replaced the oil level sensor but my car is showing the same thing that oil level sensor in error. And I can’t check oil level in my car .
Can you please help me brother?
@@pelicanparts thanks brother , i have one more question. Do you some information of obd trouble code p0698 (sensor reference voltage C circuit low )?
My car keeps saying check oil level, but I recently just got an oil change.
It could either be low or have a faulty level sensor. Be sure the oil level is correct.
I changed mine oil position sensor and the oil as well is full and still showing on dash even cleared code came back ??
Really help me a lot! Thank you!
Glad it helped!