@@aaroncantrell8819 Snowpeak p35 The other day I was cleaning the barrel of my snowpeak and the line wouldn’t pass through it so I poked it with a small stick and for some info my pcp is p35 5.5mm just bought it all new a week ago didn’t even use it yet properly except zeroing the scope. So I cleaned it and just dry fired it and it started leaking all of its air like in a blink of an eye it just all went out of it. So after that I filled it again and it started leaking again. Then I cocked it and filled it again and it held it’s air but when I fired it again all of the air just leaked in a blink, and when I coked it while the air was leaking it stopped leaking again. Sorry for the bad English, not mt first language. Thanks for bearing me
@@saimray8088 First take a look at this link: ua-cam.com/video/v4ZEljZyhq4/v-deo.html Once you watch this you can see exactly where the leak is coming from. I think when you pushed the stick down the barrel some particles fell through the transfer port and lodged in there. Either that or valve is sticking after each shot. leaving the plunger open. I have never had this problem but perhaps you can find a video that deals with your problem. Best of luck.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Great information Aaron. Thanks for making this video.
Thanks for always watching.
Nice system sir and it definitely looks great for self home security 🎉
Works good.
Great informative video Aaron. Thanks for that buddy 👍🇬🇧.
Thanks you for watching.
Good stuff Aaron.
Security isn’t all about having a reliable weapon. Gotta have good intel! Thanks for the ideas.
Right because Intel and deterrents can save you for having to pull the trigger in the first place which is the best outcome. Best of luck.
Exelent info. MR.Aron i actually learn something new 👌
Thanks.
A + review i will look for some of those item here in the UK 👍👍👍
They are everywhere but under different manufacturers. Best of luck.
How to contact you Aaron?
Right here if the best way. I will respond to any request that I can from the comments. Thanks.
@@aaroncantrell8819 Snowpeak p35
The other day I was cleaning the barrel of my snowpeak and the line wouldn’t pass through it so I poked it with a small stick and for some info my pcp is p35 5.5mm just bought it all new a week ago didn’t even use it yet properly except zeroing the scope. So I cleaned it and just dry fired it and it started leaking all of its air like in a blink of an eye it just all went out of it. So after that I filled it again and it started leaking again. Then I cocked it and filled it again and it held it’s air but when I fired it again all of the air just leaked in a blink, and when I coked it while the air was leaking it stopped leaking again. Sorry for the bad English, not mt first language. Thanks for bearing me
@@saimray8088 First take a look at this link:
ua-cam.com/video/v4ZEljZyhq4/v-deo.html
Once you watch this you can see exactly where the leak is coming from. I think when you pushed the stick down the barrel some particles fell through the transfer port and lodged in there. Either that or valve is sticking after each shot. leaving the plunger open. I have never had this problem but perhaps you can find a video that deals with your problem. Best of luck.
@@aaroncantrell8819 thanks for the video. So what happened is I pumped it up to 15mpa and it stopped leaking