Man a set of drag bars would look absolutely killer on that bike! I really dig the springer front end. If it didn't fight you every step of the way then it wouldn't be a chopper...
1000 thumbs up! The bad thing about this comment above is you are taught a stupid way and you just keep doing it until someone comes along and says "do it this way" then you slap your head. LOL!
I am stoked that you posted this video; there are no pics or instructions for installing the stay rod, ( as per Chris @ TCBros), so seeing your video showing how you installed yours just made my day.
That springer looks bad ass. I have always love the mechanical look of a springer. For me I like the apes better than the drag bars, at least on this bike. Really looks like someone along the way did some half ass work on this thing. Good to see you getting it worked out.
Yo blockhead your videos are great! It's been 6 almost 7 years since I've ridden. I took a msf course up here as a refresher, but your videos we're actually more helpful! How you Broke it down and gave your personal insight/tips made everything alot easier when I Picked up my 2018 harley iron 883 Friday. You rock man keep the vids coming
In order to be a chopper, either the neck has to be cut and raked or the frame has to be hard tailed. If the frame is originally built as a hardtail and the neck is raked from the beginning, it isn't "chopped" and therefore, it isn't a chopper.
I like the drags, but I would go with Z bars to be honest, especially after seeing the Headlight on it! but either way, it's still going to be a dope-ass bike!
Dunno if it's street legal but I would have gone with 2 small lights around or under the top springs, just to visually clear them and make them be the center piece of attention of the front, especially with drag bars.
Can you give me the part number for the triple tree adapters for that Springer?You said you found them on Amazon. Can’t find them? Thanks buddy great video
Have you considered some mini T bars. Thats not the actual name lol, but Biltwell has some pretty cool options when it comes to narrow funky looking bars. Beautiful build any way you decide to go anyway, shout out from Puerto Rico Señor Block 😎✌🏼
Put a fat tire on the front it'll be a bobber. Skinny tire and its a choppah. 👍 Also, stainless braided brake lines would look sick and feel much nicer for braking. Might be spendy but well worth the investment imo. I like the drag bar look more myself but the mini apes are decent as well. 👍
The drag bars look great, I like the low profile look though so I'm biased as hell.
Man a set of drag bars would look absolutely killer on that bike! I really dig the springer front end. If it didn't fight you every step of the way then it wouldn't be a chopper...
Pro tip: put the brake fluid back in from the bottom with a pump.... once the master cylinder has fluid, you're good. No more bleeding brakes.
1000 thumbs up! The bad thing about this comment above is you are taught a stupid way and you just keep doing it until someone comes along and says "do it this way" then you slap your head. LOL!
One bolt...i know that feeling too well.
"Charlie Murphy!" lol
the whole "throwing it on there" looks so cheesy... I love it!
Loving the drags, good choice
Drag bars FTW, love that low and sleek look.
Drag bars always look great
Bro.... you should have some Flanders cafe low , narrow bars for that chopper. Cut them in an inch or so ... it would be comfy and mean!
I am stoked that you posted this video; there are no pics or instructions for installing the stay rod, ( as per Chris @ TCBros), so seeing your video showing how you installed yours just made my day.
A chopper is when something is changed by cutting a bobber is when parts a just removed but reversed easily.
That springer looks bad ass. I have always love the mechanical look of a springer. For me I like the apes better than the drag bars, at least on this bike. Really looks like someone along the way did some half ass work on this thing. Good to see you getting it worked out.
Block if run the apes in line with the forks it will flow better. Just my opinion. Great job so far.
The drag bars on it would look really nice👌
The drag bars looks awesome.
Just got my Moto Iron black springer setup from TC Bros yesterday! going on my 2007 black sporty. :)
Drag bar for sure. Love that low profile look as well.
Builds going well. Even with the bolt issue. I realize you need a stripper to build a chopper. Wire stripper, lol
Hooah
The apes seem to fit the look of the chopper better IMO
Yeah def gives it that old school vibe
The drag bars gave it a Harley Davidson and the Marlboro Man vibe. Looked badass. Big fan of the low profile.
Yo blockhead your videos are great! It's been 6 almost 7 years since I've ridden. I took a msf course up here as a refresher, but your videos we're actually more helpful! How you Broke it down and gave your personal insight/tips made everything alot easier when I Picked up my 2018 harley iron 883 Friday. You rock man keep the vids coming
zed's dead baby, zed's dead..
The apes looks so much Betta!!!
That's easy to answer , if you don't know by now silicone helps seal out moisture. Everyone knows that. Jeff
Definetley feeling the drag bars
Block is really lovin this new editor i bet 😂😂 it was fun to watch
In order to be a chopper, either the neck has to be cut and raked or the frame has to be hard tailed. If the frame is originally built as a hardtail and the neck is raked from the beginning, it isn't "chopped" and therefore, it isn't a chopper.
Man that thing is looking great! Yeah I want one 😎
now this bike needs a new rear fender and a tall sissybar
Drag bars make it look bad ass
I like the drags, but I would go with Z bars to be honest, especially after seeing the Headlight on it! but either way, it's still going to be a dope-ass bike!
Exhaust gaskets are 18$ for two At iron steed Harley in Vacaville California.
Drag bars! I have them on my shovelhead with a springer. Always gives a mean look 🤙🏻
lol the mini apes seem too tall after seeing how good the drag bars look on it =)
They are much taller, haha
Ah too bad about those drag bars... The bike would look so much better with them!
Great video brother keep up the great work
8 inch risers with narrow drag bars!
Totally needs the drag bars. Not a fan of apes as it is, I just think it looks so much better with the low bars.
Just bought the modular risers the other day
Looks great, Block!
That bike is bad to the bone Block! Great work
Drag bars make the bike looks slick
I love the drag bars
Dremel the inners of the controls out so you can run the drag bars. I think it looks way better.
I say ditch the drag and apes, go rabbit ears.
The drag bars look amazing !
Definitely liked the look of the drag bars. It’s a shame they wouldn’t fit.
Like your work bench
So happy you changed the bars man looks much better
Looks so good !
can you please tell me how much they charged you to power coat the heat shields on the yamaha bolt
that disc brake looks sick block
Love the drag bars
needs Hollywood bars
Front brake on springer? Never heard of her 😂 looks awesome man
Nope.., no Drags, I wanna see a Miniape.
Dunno if it's street legal but I would have gone with 2 small lights around or under the top springs, just to visually clear them and make them be the center piece of attention of the front, especially with drag bars.
Do you have a link for the riser adapter bolts on Amazon?
What lemght of springer did you go with ?
Is this +4 or +6?
I like the flat bars better. Like someone else said, I am also biased. 😂
The drag bars look better on it then the apes
is this 2 over springer? thanks for answer!
drag bars for sure
Well, now you have to change the name of the choppa to Silicone Sally.
vids are getting better and better with every upload man!! very nice job with the editing!! keep it up!!
Mini apes always look good.... Drag bar would've looked Sick! silicone instead of gasket... WHY?? guess is was definitely a custom exhaust
Drag bars make it a bad ass bison
Because of the jockey shift, I would keep the drag bars but apes look better imo
Chobber, is what it is
Can you give me the part number for the triple tree adapters for that Springer?You said you found them on Amazon. Can’t find them? Thanks buddy great video
Would love to see some bunny bars on it!
Do you remember the springer length? Thank you!
This front end needs apes! Drag bars and springer just ain't right.😁
Great bike. Love the channel. Keep up the great work!
Awesome vid. Giving me ideas for sure. What scissor stand brand are you using?
It looks like a Harbor Freight lift.
@@gameproplayer15 they honestly all look the same. Been looking at them for a few days now
@@sterlingjcalvin I'm currently looking as well, my old sears lift quit the other day.
The " Sally" needs only one more thing, ME, HA HA. I WISH.....
Good God I love this bike
hi man, the front end springer is how much over " ?
A low Z Bar also could look goo AF
Is that own length or shortened springer?
The best build you done ✔👌
Have you considered some mini T bars. Thats not the actual name lol, but Biltwell has some pretty cool options when it comes to narrow funky looking bars. Beautiful build any way you decide to go anyway, shout out from Puerto Rico Señor Block 😎✌🏼
Looking good!
Put a fat tire on the front it'll be a bobber. Skinny tire and its a choppah. 👍
Also, stainless braided brake lines would look sick and feel much nicer for braking. Might be spendy but well worth the investment imo.
I like the drag bar look more myself but the mini apes are decent as well. 👍
Drag bars and paint the back of the headlight housing black
No drags old bars to me looked more chopperish and lot better
Love your videos!
Tcbros rock
I think you should make the chopper guys cry and put on cafe racer clip ons.
日本だとパーツを集めるのは難しいし、ホンダとかスズキ、カワサキ、ヤマハも最近はアメリカンバイクを作ってないから参考になるよ ありがとう。
Mini apes! Please! 😊🙌🙌
I vote apes, especially with that headlight
I prefer the drag bars.
you should make a video on your motorcycle/sportbike collection
2am sharp huh
Yes?
Apes are more my style but the drag bars look dope too
Can’t wait to see it run!!! You taking it to EDR?
It says the video came out 40seconds ago but there are over 100 views and comments from 5hours ago noice
Patreon
It’s a raked Bobber...