CAT generator BOILED!! Jumping to the worst case first!!
Вставка
- Опубліковано 29 вер 2024
- CAT Generator boiled! Going for the worst case first!!! Oil leaks and non - starters, oil pressure release Perkins engine!
Professional struggler, Get your official Professional Struggler merchandise here
www.profession...
All Music used in videos is copyright free and from Epidemic Sounds
get your free 30 day trial here
www.epidemicso...
Any sponsors or reviews or owt for nowt email me direct here … but if your product is sh*t don’t bother
professionalstruggler81@gmail.com
Leaving something to last minute. Never known a farmer like it 🫣🫣🤦♂️🤣
Reminds me of my first summer job,in a quarry,, 15yo😂 one daily job was take diesel Bowser pulled with an ancient brakeless tractor, and fill loading shovels,crusher and the biggest generator, 20' container size, which for some reason I regularly forget about 😂😂 some angry running around men when that happened 😂 I think it had a v16 Detroit 2stroke engine,, thirsty it was
Another great video Chris mate. Is that Partic magazine on line to view. ?? Keep the Struggle going mate.
I don’t think it is mate, I’ll ask Paula
A few years ago we built a complete new farm for a Mr De Haan. The site had security on the gates, so when some scruffy guy came round riding his bike, we tried to see him off. Turned out he not only owned the farm, but SAGA, as well.
Never judge a book by its cover, the older I get the truer it gets
Poor old Mr Folkestone
😂 yeah perfect example mate ❤️ I’ve just wiki mr De Hann, interesting to here his business ect!
The word (not bodge) you are looking for is " workaround " 😁👍🇮🇪
😂😂that’s it mate 👌
Great video as always Chris can't beat a bit of the struggler
Cheers Keith mate 👍
chris the engine is a Heui engine made by international and are fitted into american trucks fitted by Perkins and just painted cat colours go to a Perkins dealer and will be cheaper there should be lights on the side in a box for diagnostic tests cat are a fortune injection works on oil pressure on the side there is a pump and a IPR valve with 2x wires going to it that will stop it running on your video at 29 mins you will see the IPR valve you need to change the oils every 250 hours or they will gunge up
Now you're famous, remember we knew you when you had nothing 😂👍🇮🇪
😂😂 still got nothing mate🤦🏼♂️😂
Apologies if I'm teaching my grandmother to suck eggs - you can trace cables with a tone generator and probe. I've never tried it on a vehicle wiring loom, but it would work - before I retired I worked in IT, and used the tool for tracing network and phone cables (like wiring looms, all the same colour). You put the generator on one end of the wire, then use the probe to follow it - you can adjust the sensitivity, so if a cable runs above a corridor ceiling, you can follow it by holding the probe up and listening to the volume as you walk along. With the sensitivity turned down, you can identify the cable in a tight bundle.
Well done working out the electrickery fault Chris,even tho there'd been several people on it before you 👌 its good to see someone thinking outside of the box to sort out a problem too,brilliant vlog fella 👍👍
Great video Chris. Brings back memories. I worked on the electrical side of those gen sets. The Cats were very reliable and ran for years. Great job with that home made tool, very clever!🇨🇦🚁
I've extracted stuff like that using a rawl bolt before now!
Awesome video thanks Chris very much appreciated top job 🚛🚜🚛🚜🚛🚜🤑
Thanks phil mate 👍👍
When was the last time you worked on a Lorry Chris?.. you have slowly morphed into a industrial mechanic.. please don't take this the wrong way and call me out on the next video.. i really enjoy watching your channel no matter what you work on.. I'd watch you drinking a case of Fosters for 30 minutes without you saying a word..it would still make me laugh..😂😂 🍻🍺
😂😂 cheers Andy mate! I just follow the work mate! It’s all the same struggle to me, as long as they pay ❤️🫡 take it easy mate 👍
You definitely know how to solve problems for sure Chris. You’re always thinking out of the box and tackling the struggle. Oh look at you being in a magazine along with Lil’l dog 👏👍🇨🇦💕
Still carnt understand why Fosters Lager has not been in touch with chris. Get that lad on can fosters make millions brilliant videos chris lad ❤
😂😂🍻 I’d drink to that mate
Chris, you you are as daft as brush lad down to earth real deal you couldn't make it up brilliant ❤❤
😂😂 got to daft to do the job mate 😂👍👍
That's what i like about your channel, Chris, the old school mentality where if you need a special tool, you just make your own variation off it. (2 screwdrivers and a hammer can fix almost anything😂😂😂) You are definitely the king of just getting it going anyway you can
😂😂 we do like a good site fix mate ❤️👍
Loved this one . Cheers lad
Chris you machical genius you!!!🇮🇪👍
😂😂 cheers mate
Who needs the right tool when you have Common Sense 👍 it's just a shame that there isn't a common sense APP for the youth of today 😂
Good afternoon Chris another excellent video whoop whoop 👍👍👍👍👍👍👏👏👏👏👏👏👏
Great video Chris as always it suprised me how you have the patience to do the job and film it adding your funny comment’s.
👏🤞👍🙏🚜
You love chasing broken wires and electrical work don’t you Chris 😉😂.
😂😂 yep 🤦🏼♂️
Hello from Glasgow Scotland 🏴
Hello from 🇦🇹 Austria
Hello from abercregan
@@philippreitshammer hello 👋 0:50
@@Davidthomasv8hello 😁👋
Hello 🏴😁
poor Leals is more famous than you now Chris 🤣 Another jobs a gooden.
😂😂 poor lil dag
Brilliant struggle 👍👍you could do with a couple 🍺🍺ya you do😂😂keep up the struggles 💪💪
that there chris is being an engineer mate thinking out of the box and making your own tools
🫡👍👍 cheers mate
Can't beat bit of professional struggler
Nice one Chris. And paw paw leer dawg, handles stress and fame with ease. 👍
Bloody good work Chris, we do like a Farmer's Fix...
Van struggle this end 👎
I could watch Chris invent tools all day hahaha
@@PAYNEKILLER.. 😂😂 ah I like that Wayne inventor 😉😬😂
It’s not a bodge Chris it a modification
That’s the one mate 😂
Patent that new tool you made chris lol
😂😂👍
That's typical farmers.....
Yep 😂👍
Bloody brilliant video as always Chris, thank you very much mate!! 👌 I had no idea that CAT acquired Perkins. Everyday’s a school day eh?! All the best to you & all the family mate!! Professional legend!!! 🤠
Collectors edition of Partic Magazine ♥️💪🏻👍🏼✅👏🏼
I was at a horse event with my mum when I was a kids with our golden lab dog. A old guy came and sat down saying how he loves golden lab. Even brought my dog fish & chips. My mum finally asked what he was doing at the event. He said "i own this estate" 😂 a few weeks later he was on the front page of the newspaper because he told Prince William off for driving to fast on his estate 😂😂 he was a loving old man to me and my mum but especially to my dog 😂
1 day you will learn when someone says Teletruc your reply is F**k off !!! Or sorry I am busy 😂😂😂
100% the correct reply 😂
Looving the tigerseal repair😂, that cat engine is a Perkins in a posh paint job,before i became a trucker I was a fitter on generators for Caterpillar
Tiger seal never failed me yet even gos off under water poor lees he be worn outputt paw prints on autograph hunters books soon 🐾😂🤠🛠️⚓️JB
Drinking fosters and driving is a crime.
Hi Chris, excellent video as always, your reaction when you turned ignition on after pushing the relay in was priceless, I wish you were from around wrexham area cus I would invent problems just to get you to our yard just for the laughs, keep being you and keeping us entertained. Jason in wrexham
Chris I've used expanding rawl bolts to remove them I've made my own slide hammer attachments out of them 28:25
Take the 💰 and 🏃♀️ chris
😂😂 see ya 👋
them pumps also need a special five sided 50 pound tool till get the bolts out of the jcb if it's any thing like the digger pumps
the rubber pump bulbs are a pig had to replace one on a jcb digger was sucking air in through the rubber hand pump. You can bleed them to at the return pipe of the injectors with a cheap clark air powered suction brake bleeder clears the entire system of air locks
Half way in an im feeling sorry for you chris, working on others bodge, then seeing those wires all the same colour!!!
Great struggle Chris 😊
Aye up mush thoes international engines forever having oil leaks at the hpfp and the oil cooler 🫠 have the same job some point this week 😄
Try another angle with the camera tired of looking up your nose
Best on UA-cam big up dj projects for telling us about you chris .
and tell him to go to a FGW dealer as its not a CAT engine only painted cat colours and the engine number should be on the top of the rocker cover
😮 They're are the same colour 😮.
Onsite fabrication 👍
It’s an Old School engine run the Fused Wire good for you an them
I definitely wouldn't have taken on that generator job on
Some jobs you're better walking away from 😂
Hello from Willebroek Belgium
😂 I can guess the company that had look before you
Pissing myself
😂 cheers mate
that my friend is a winner winner, its about getting round problems thats a great work around !!!
You not be Scott’s yard for awhile
Next time you eat your weetabix and they taste of diesel fumes now you know why
Seems a big genny got to be running light yes better having it running outside in the fresh air than sucking all the dust through the machine if the radiator was choked imagine the windings
Must be breaking farmers hearts running generators on the white stuff
Whoop whoop
Who needs special tools? Chris don’t!!! 👏👏👍
trace the wire game chris fun fun fun
I don’t mind the e-bike stuff, but I really enjoy these diagnostic/heavy machine episodes Chris 😀, they’re are ace 😃.
Cheers mr Zimma! I think everyone’s had enough of e-bike reviews mate 😂😂 but you know me oat for nowt 😂👍
@@Professional-struggler No worried Chris, lol😄.
Another kushty video
Have a Greggs on me brother x
The contraptions you make are very impressive Chris, well done that struggler
Cheers Jonathan mate 👍👍
@@Professional-struggler Always look forward to your videos mate, keep up the great work
@@jonathankeerie9129 I shall try my mate 👍
@@Professional-struggler I have no doubt.
Tiger seal is the dis b’s!
Couldn't help but laugh when he left you the instructions and a box full of gaskets etc
He knows me to well mate 😂😂
Nice to see you back on the tools again chris after the last few videos of caravan hols and bikes loved them all specially the caravan convention I never laft😅😅😅so much as I came across the same problems on my convention well done 😊
Cheers Colin mate! It’s much appreciated! Still got lots to do to the camper to be perfect
Christ that front cover Chris there a night mare bud
Yeah looks a nightmare mate that 👍
Great video Chris
What a load of bloody struggles
But as normal Chris you found the root of the problem and sorted it out well done for finding a way to get that oil pressure valve out as they say Chris every problem has a solution to solve it and you found the solution again well done mate and that tiger sealant worked a treat so that dryer can be used until you get back there to do it properly
Big 👍 to the Partic crew for featuring you and lil dag in their Magazine you must be their number 1 Customer Chris
Bloody good show ye it was
See you on the next one
Whooo whooo
Great bit of initiative on the old oil pressure sensor buddy,,, and the old temporary (permanent) tiger seal trick haha brilliant
Afternoon Chris…..ooh a Monday upload, what joy……whoop whoop 👍👌🇮🇲🤪 ps 100% ingenuity on the oil pressure relief valve….top struggling bodge tool.
Typical farmer - no maintenance and then wonders why machines don't work
27:13 up n down, side to side.....?
Normally foooked then?😅👍
thats just a rexwroth pump no timing involved just a pressure pumpbuilds up oil pressure to the fuel rail it will have a ECM on the side and to the right there are the lights
Hi Chris they make Perkins engines in Stafford Staffordshire,
Hi Chris it’s not bodge it’s farm yard repair keep struggling
Chris, @32 mins, next time, use a 3/8th or 1/4 extension in the inside, fill the remaining space with an Allan key and twist to clamp the inside and you’ll pull it out.
Well thought through solution, to an unwated problem, because the tool that was needed, couldnt be found in ones tool box.😂😂😂😂😂
Need to boom out to raise the cab Chris, nightmare pulling boom out manually, it will be corrosion or broken wires usually at plug connectors under cab, should be able to start with cab up though. Tank has a filter on pick up pipe, gets blocked easily.
The word bodge is great but I use the phrase adequate repair makes it sound a lot more professional
Nice work Oops fix once again😂😂😂😂 in the magazine as well Chris that’s what you may call a good job 👍👍👍👍👍👍👍👍🙋♂️☘️🇬🇧
Another great and interesting video has always chris and leahdag and family 👍
Yahayy!!! Tiger seal,Tek screws and ty-raps the essential 3Ts of any worthy struggle😉
Ya was proud of that device you made wasn't ya lol. Great idea Chris, lovely when stuff works!
Chris you cheered me up after a bad day cheers❤️😀
Cracking video leardag
He said thanks! While he’s sleeping 💤 😂
That teletubby Tie cab to forks and extend boom struggler
If you was a sherrif chris,one way or another, you'd always get your man....He's good yeah he is
Hello Chris thats not a cat engine it's a perkins engine as u probably realised when u seen the parts for it. I used to work for caterpillar electric in n.ireland in a town called Larne wer we assembled them im not surprised its over heating lol
Chris we don’t call it bodging we call it on-site engineering. Also the alternator (stator) has bolts on the bell houseing and flywheel underneath that cover you pointed out at the start. I work on these for a living
'ey up chris 👍👍👍
Great video Chris and a good write up on you in the partec mag too😊
This is one of them jobs you back heel! Not worth the hassle and time.
ahh !! back to the good old struggle. struggle on yeah ya will lol cheers chris 🤣👍