Digital SWR Power Meter MFJ-849 Comparison Review VSWR Meter
Вставка
- Опубліковано 7 жов 2024
- Here's a fast video about the recent MFJ-849 digital SWR/Power meter I picked up. In under 5 minutes, you will check out this new product, and see how it looks compared to an analog cross needle meter.
Support my channel at paypal.me/hamradioconcepts/1
LIKE and SHARE on hamradioconcepts
I love comments and thumbs up.
Im a newbie. Really appreciated the concise and well presented information.
me too! thank you!
I really enjoy your videos. You are a really good explainer. You’d be a gift to the teaching community. Moved to Oregon from 4 land - Plantation Fl. Best regards. Fred N4CYF
Hi,good interesting video, I do a similar test with the KPO digital swr and power metre and the DAIWA 903 ,3000 watt's Cross hair metre, for SSB work the Cross hair metre is much easier to understand, thanks from Rotterdam....
Thank you for the explanation, very informative.. Thank you again
Thanks for posting 73!!
For a wattmeter to read PEP it must have some type of power so if you use the cross needle meter for PEP it will require it to be plugged into the power plug.
Solid work! Great video! Very much appreciated! - 73, KC3UIJ
It would have been nice if you did a real world comparison using an actual antenna, to show us if both meters displayed equal values.
The explanation of the cross needle was more than adequate. We certainly got the idea.
I agree.
YEA, what he said..............
Cute meter for the shack, in the field I'd prefer one that doesn't use power.
But then to be honest in the field I'd use my Z817 (no meter needed) or a tuner like the MFJ-971 with one build in.
Thanks for the review though as I'm thinking of getting a shack swr meter for the shack.
Atu-100/Atu-130 are great for field trips, work off Internal 18650 rechargable batteries that give upto 12hrs standby, worth a look at, I don't think they made them 5yrs ago lol. 73's
Great insight and thanks... Dafydd M6ULU - United Kingdom
I got the mfj 849...It works very nice!
Great video! Thanks for posting, & 73! Steve KD2ONI
I have to say that my digital VSWR//Watt meter is perfect, though mine has NISSEI, not MFJ on the front, so, who is the maker/ distributor of this wonderful digital meter? I'm sure MFJ buy in the units too. Do MFJ claim to make there's? I did some math and found that the reason for the difference in reading from the digital (almost nothing) was the power needed to lift the analogue meter. I have pushed 500W through min digital and it read 500 too! I didn't expect that. Though my analogue twin needle meter handles 3KW and is remarkably accurate too. A great buy and a thunbs up for the digital meter. 73 de Tony G6YPK
I love the digital. Is very accurate
You can clearly see that the digital meter is not a genuine MFJ product - it's too well built. It is actually made by Nissei, and MFJ put their logo on.
MFJ rebrands some things. I have an antenna window clip mount that I believe is a rebrand of an HYS. But, that's not always a bad thing, because in my case it meant getting the mount at HRO off the shelf same day or in 2 days if out of stock vs. waiting for 1 month to get it from CZ China....maybe.
not sure if your following the thread still, do you know for a fact that the Nissei is a partly better unit than the MFJ or same with different name stenciled on face?
The first thing I noticed on the cross-needle was the OVER-SHOOT!
Awesome thx for the info.
Like what your doing- keep it up OM!! 73 de paul N0AH
I have the KPO DG-103 metre just the same as the digital metre, gives an average power output, but it does struggle to stay the same, I may key up 250w & it will slowly go downwards and stop around 240/235w.
Never do I get any reflect its always power at the antenna, and at £170.00 I was expecting a better product.
Thanks pal , good video , can it be used on CB ?
That watt meter could you add a cigarette lighter plug to use in mobile locations
The cross needle meter needs power for the peak reading feature. Not just for the backlight.
Does it come with the DC adapter cable needed to power it, and if not, will a simple 1 amp "wall wart" work? I know that is all you need to power a regular one where the lamp that illuminates the meter is all it powers. But I am wondering how much power it requires.
The 849 does not have a peak hold capability? Pity.
if MFJ was smart they would have it powered with 4 AA
but NO PEP measurement.
Hello Eric
I do not have an external SWR meter such as you do in this video. I just rely on my internal SWR meter on the the radio however I do have a question about my analog meter on my radio. In this video you have your radio set to 100 watts and when you key up the mic, both on the analog and the digital meter shows 100 watts of forward power being put out which means it is very accurate and working properly. Now, here is my problem. I have the IC-7300. This IC-7300 has an analog meter. When I set my IC-7300 to 100 watts and key up my mic the forward power is suppose to show 100 watts of forward power being put out however my analog meter shows only 35 watts of forward power being put out. What do you think could be causing such a huge discrepancy between the 100 watts the IC-7300 is set to and and the actual amount of forward power (35watts) that is being put out?
👍👍
Can you do a video showing the baofeng UV-5R and how many watts it really transmit on both bands. I would like to know since it’s one of the cheapest radios out there.
F. Villela all of them would be different. Each radio is an individual just like anything made in mass production.
Not being leagel limit is a minus too
will this Model , will Measure the SWR from 200Mhz to 400Mhz (military Band )
cos Most of MFJ swr Meters Won't do ,..
quick question: does it measure PEP?
Would you recommend that digital meter? Where would be the best place to buy one? Thanks
The swr needle is out of adjustment needs zeroing
Did you find the MFJ 849 to be as accurate as the analog MFJ meter?
KU3X
I like to know can i use my AV-400 meter that is 140 to 525mhz for 50 to 54MHZ i know the meter is out of band but i just like to know how fare out it would be and if it can tell me if my SWR is even close to good, it did a test the ref is very low and my fwd is high, my radio is a kenwood ts 690sat and on full power its using 12 amps on TX in to my ANT i just made
Hey bud I was just wondering will one of those digital meters work on 11 meter CB ban? Love your videos!
Big Rob Brown this meter works on frequencies from 1.6 MHz through to 525 MHz so yes it can be used on the cb band
Do you like the digital meter rather than the dosy type meter
Big Rob Brown I like either one ..... digital is easy to read but I would trust the analog more ...don’t know why just me maybe
Tengo un amigo radioaficionado que es no vidente, él necesita un medidor de SWR y potencia "que hable". Saben de alguno que nos recomienden???
If you could only have one ! Which would you prefer ?
KJ4YQO
New to hobby. Do you keep the power meter in-line during normal operation? Or is this unit meant to be for testing only.
Tyrone it's totally upto you, I leave my metre Inline always on both of my radios, some people will argue differently, but tbh personally I think its a safer option.
Does it matter where the swr meter is placed before or after the tuner?
Ater the radio and prior to the tuner.
Question. I just bought this meter and when I transmit it reads 0watts output on HF unless I talk. Then it will vary between 0 and say 60 on the meter depending on how loud I talk. Why does yours key up to 100 watts output when you just press the putt switch? Am I missing something here. Thank you for the video.
That is a sideband without modulation. Switch your rig from LSB / USB to AM or RTTY, it will read a constant output. WW1TA
Zero SWR???!!! Maybe zero reflection or 1:1 SWR.
James Cutler you know what I meant LOL
It is worthless in terms of SSB; it lacks features like peak hold, among others. This makes this meter, in my opinion, less suitable than a good cross meter.
Have you tried it on SSB as I'm interested in buying one but does it do Peak Envelope Power??
73..Ian Harling G7HFS
I bought one, and it is useless on SSB. I am here trying to find a mod to make it display PEP. On CW digital, or AM/FM it works great!
@@DonaldChapman Spectrum Communications here in the UK do a pep add on board that maybe of interest?
@@ianharling9569 Thank you! I will check in to it!
2:35 "Because I am going into a dummy load I should have almost a 0(!) SWR". Ahm no - no such thing as a SWR below 1.0!!
kwinzman you know what I meant
can you keep em a little bit shorter? 👍
Bruce Malo: I saw nothing wrong with the length of the video.... I think we all can spare 4:31 of our time. I see it benefiting new hams!! 73!!
I know Eric and that was just a joke about this new type of video that he has begun making. Longer doesnt necessarily mean better, and this is a perfect example. When making a technical video for the new ham operator, small doses of technical learning works best. im looking forward to these shorties! I would rather see someone spend five minutes, learning a little tidbit on a technical matter, than watching someone spend five minutes memorizing test ANSWERS just to pass the test, yet have no clue what they are doing... Hope that answers your question. Any suggestions for future short videos by Eric.??? 73
Hello, quick question; Will this display down to 1/4 watt on 76-108mHz ???
Boyd Bros. No
It's just MFJ. Toss a coin and see what you get. LOL
Thanks... manicures are nothing to be ashamed of. I'm just sayin......
Lol you living on a ball still 😷,, poor lad
zero swr? huh?
ms3bani I said it wrong....point was made tho :)
ms3bani I,