Great job explaining the process. It really helped me with my instruction!! I'm now up and running! 1.5 hours solo installation. Thanks for sharing!! Mooresville NC USA
I know this is an old video but by god I hope you can help me. I followed this video to setup my LED rear reflectors and it works 100% so thanks for that. Now I want to install a diffuser with the brake light but don't know how to wire it so that it lights up when I hit the brakes. Can you help guide with that or point to a link I may be able to check out?
Great video. I pretty much copy paste what you did but for some reason the driver side reflector doesn’t light up and the brake lights work so idk what I did wrong. Could use any advice on problem solving
Honestly there could be a problem with the lights.. friend of mine got the same lights and they wouldn't stay on only when he would brake so not sure what could be the issue🤔
Got these used from a friend, after 2 hours installing, only 3 LEDS on both reflectors lit up instead of all the LED’s. (Saw then working on his car before taking off and putting them on mine) I left them on w/o wiring them up for about 2 weeks so maybe they were exposed to too much water or debris?? Guess I’ll just buy some lol thanks for the vid though
Excellent video, great wk! Thank you for sharing. I will be installing mine tomorrow. BTW your car looks sick. Do you have a video for the tail light waring install as well?
Thanks you👍 ... as for the rear tail light heres the link Watch "06-11 LEXUS IS250 350 AFTER MARKET TAIL LIGHT INSTALLATION" on UA-cam ua-cam.com/video/uDSwWhCNw7M/v-deo.html
Thank you from the uk!!! My rear left reflector has cracked some dude musta hit my car and drove away I’ve seen these reflectors on eBay for like £45! So I’m gonna get one. So it’s just remove those two caps, with the 10mm and then the bolt each side up on the corner? Then slowly pull the clips away god I hope I don’t break um! I’ll go mad ha ha But thanks !!! Jordan ✌🏻
SimpleSickBuilds just one last question do you think I’d be ok just un Doing the left side corner as it’s only the left side I need to get down or not?
Honestly i think youll have to do both because there is bolts on the bottom off the bumper as well and you might break clips if you only do one side.. just play it safe and do both it will only take you 5min more.
I have a video titled " everything about my is250 " check it out Watch "Everything about my 2010 Lexus is250 #SimpleSickBuilds" on UA-cam ua-cam.com/video/6cpbqDPP1Vk/v-deo.html
I used some 1" self tap screws i had in my tool box.. there is just a bit of a gap not much did my best but i think its just the mold. You kno ebay stuff lol
No they are only on when the car has the lights on like normal rear lights and light up when you press the brake .... but you might be able to wire them like DRL's 🤔 but not 100% sure.
Looking for rear spoiler top cars only got 300 qwid init only as got it of my mate runs really well it's got oil light on saying needs changing so got new oil n filter reddy can the front light be split as one as water in n wanting too get them out too see if l can l nor Google tell you most stuff lol but am old school me 😊 meny thanks Craig
Check out my other videos i have links to most of the stuff on my car and i also got a video on how to cahnge the oil and reset the oil Maintenance light👍
Brother i still didn’t get the waring conection like how we gonna suppose to conect with old cable? Just tape them with old waring I know what colour with what cable goes
Here you go man. www.ebay.com/itm/For-2006-2013-Lexus-IS250-IS350-JDM-Red-Lens-LED-Rear-Bumper-Brake-Light-Lamps/311813819738?fits=Model%3AIS250&hash=item48998d4d5a:g:A54AAOSwRiJeO2Zn
Also, has anyone purchased these recently and how long did they last? Looking into buying another set but would hate to go through all the trouble again for them to only last a few months.
Heres the link: www.ebay.com/itm/For-06-08-Lexus-IS250-IS350-LED-Tail-Lights-Rear-Brake-Lamps-Black-Replacement/301803346384?epid=1846806972&hash=item4644e199d0
Great job explaining the process. It really helped me with my instruction!! I'm now up and running! 1.5 hours solo installation. Thanks for sharing!! Mooresville NC USA
No problem glad i can help👍
I know this is an old video but by god I hope you can help me.
I followed this video to setup my LED rear reflectors and it works 100% so thanks for that.
Now I want to install a diffuser with the brake light but don't know how to wire it so that it lights up when I hit the brakes.
Can you help guide with that or point to a link I may be able to check out?
THANKS BRO! LOVE YOUR VIDS SO HELPFUL.
Put mine in today, works perfect! Thank you sir!
This is a good video! These are a good price too, beats buying them $50 EACH for the oem reflectors lol
I'm glad you enjoyed the video... this is the cheapest ones i could fine as well and definitely beats buying the oem one...
Wow so glad i found a channel like yours.
Nice man. Look the effort you put into this mod and video!
Thanks man👍
Nice instructional video, you know your stuff, keep em coming!
Thank you👍
I just got the exact same reflector lights. Thanks for explaining it well
Very nice tutorial.
I do have a question though - Are these reflective while off?
Thanks and they are not reflective unfortunately.
Great video. I pretty much copy paste what you did but for some reason the driver side reflector doesn’t light up and the brake lights work so idk what I did wrong. Could use any advice on problem solving
No sure why.. did you test them befor installing them to make sure there in good working order?
@@SimpleSickBuilds I didn’t actually lmao must be a bad one
@@immabigasian dam bro i wouldn't know what could be the problem🤔
Hey I had the same problem.
Did you figure it out?
I did the exact same wiring and my lights don't brighten up with brakes. Any advice? Works great with just parking lights!
Honestly there could be a problem with the lights.. friend of mine got the same lights and they wouldn't stay on only when he would brake so not sure what could be the issue🤔
Subscribed because We need to hit 1,000 subs! Awesome videos too! Just pickup a 2011 Is250 will be keeping it stock as for now.
Thanks man🤙2011 nice 👌
Got these used from a friend, after 2 hours installing, only 3 LEDS on both reflectors lit up instead of all the LED’s. (Saw then working on his car before taking off and putting them on mine)
I left them on w/o wiring them up for about 2 weeks so maybe they were exposed to too much water or debris?? Guess I’ll just buy some lol thanks for the vid though
They are not the best quality honestly my boy had the same problem transferring them from his car to his girls and they didn't work after
the wire you spliced from and connected the led to, is that from the brake light on the trunk(the left) or the brake light where the L(the right) is?
It was done on the outter LEFT side taillight
Should you disconnect the battery before splicing these wires? And you just strip a mid point off and wrap the reflector wire around it?
Always disconnect battery when cutting up wires
I installed rear bumper lights in SIENNA 2014, but I will not install rear bumper lights for IS250
Excellent video, great wk! Thank you for sharing. I will be installing mine tomorrow. BTW your car looks sick. Do you have a video for the tail light waring install as well?
Thanks you👍 ... as for the rear tail light heres the link Watch "06-11 LEXUS IS250 350 AFTER MARKET TAIL LIGHT INSTALLATION" on UA-cam
ua-cam.com/video/uDSwWhCNw7M/v-deo.html
@@SimpleSickBuilds i have all lights,bumpers,doors,trunk and decent interior also. All is in great condition.
Awesome vid really helpful thanks man SUBBED !
Glad it helped👍
There's a lot of different type of clear taillights but I want THOSE, where u get em
They are vland black housing
It annoying one have to practically mess with the whole car just to install little stuffs. It does look cool though.
True that man. Nothing is ever easy. For something so simple.
yeah I just spent 8 hours working on this and now the reflectors don’t even turn on
Do you now how to install that reflector?
Hi I just want to confirm before I attempt this, the bolt you take out on each side at the top.... you then pull ‘down and then out’ ?
Thanks
Yea that's correct take your time because clips can brake.
Thank you from the uk!!! My rear left reflector has cracked some dude musta hit my car and drove away
I’ve seen these reflectors on eBay for like £45! So I’m gonna get one.
So it’s just remove those two caps, with the 10mm and then the bolt each side up on the corner? Then slowly pull the clips away god I hope I don’t break um! I’ll go mad ha ha
But thanks !!! Jordan ✌🏻
@@jordanross876 no problem man glad i can help👍
SimpleSickBuilds just one last question do you think I’d be ok just un Doing the left side corner as it’s only the left side I need to get down or not?
Honestly i think youll have to do both because there is bolts on the bottom off the bumper as well and you might break clips if you only do one side.. just play it safe and do both it will only take you 5min more.
Could you please make a list of all the parts u have on the 250?
I have a video titled " everything about my is250 " check it out Watch "Everything about my 2010 Lexus is250 #SimpleSickBuilds" on UA-cam
ua-cam.com/video/6cpbqDPP1Vk/v-deo.html
Guess im buying 🤦🏻♂️ sick car bro , got the same one olmost same mods
Looking clean brother, planning to get a is250 soon
Thanks brother👍
You won’t regret it, I’ve had mine for 3 years now and I’ve never had a problem with it!
Got a is 220 06plate would be for sale at right cash in lovely metallic gray lovely motor
Av got is 220 for sale 06 plate nice fast car ?? Cheap or swaps ??
hey bro!! what length screws did u use for the diffuser? seems like there is some space between diffuser and bumper. thanks man
I used some 1" self tap screws i had in my tool box.. there is just a bit of a gap not much did my best but i think its just the mold. You kno ebay stuff lol
My white wire doesn't work I have a green wire instead of brown
I know Lexus / japanese cars don't really do rear daytime running lights in general, but do those stay on as DRL?
No they are only on when the car has the lights on like normal rear lights and light up when you press the brake .... but you might be able to wire them like DRL's 🤔 but not 100% sure.
thanks man very helpfull
Looks lots mate av got one in gray wanna make it look nice or its going lol can you help ???
Nice bro ... what could i help you with.
Looking for rear spoiler top cars only got 300 qwid init only as got it of my mate runs really well it's got oil light on saying needs changing so got new oil n filter reddy can the front light be split as one as water in n wanting too get them out too see if l can l nor Google tell you most stuff lol but am old school me 😊 meny thanks Craig
Check out my other videos i have links to most of the stuff on my car and i also got a video on how to cahnge the oil and reset the oil Maintenance light👍
@@SimpleSickBuilds thanks top man 👍
What’s the green wire for that wasn’t tapped into?
Brother i still didn’t get the waring conection like how we gonna suppose to conect with old cable? Just tape them with old waring I know what colour with what cable goes
Cut into it and just redo them with butt connectors
Hey bro by any chance would u know how many brackets does the rear bumper have?
What year Lexus is urs bro? Good vid by the way
Thanks its a 2010
Do these still act as reflectors?
Unfortunately they do not.
Any new link for the lights? Old one is no good
Here you go man.
www.ebay.com/itm/For-2006-2013-Lexus-IS250-IS350-JDM-Red-Lens-LED-Rear-Bumper-Brake-Light-Lamps/311813819738?fits=Model%3AIS250&hash=item48998d4d5a:g:A54AAOSwRiJeO2Zn
Mines has a green wire as well any idea where it wires to?
Also, has anyone purchased these recently and how long did they last? Looking into buying another set but would hate to go through all the trouble again for them to only last a few months.
I sold my car to a family friend and there still working great.. i recommend always buying new when it comes to lights
What is the price of a 2010 lexus Is350 there? Here in California are overpriced lol
Im from California next San Francisco ..they are over priced in California.
Sickkk ! Just got me some . How much to do mines bro I’m Cali also haha
Nice bro unfortunately i dont have much free time at the moment but im sure you can pull it off💪
How do you wire this to only come on when you hit the brake?
Can you send me a link to your tail lights thanks. Nice vid btw.
Heres the link:
www.ebay.com/itm/For-06-08-Lexus-IS250-IS350-LED-Tail-Lights-Rear-Brake-Lamps-Black-Replacement/301803346384?epid=1846806972&hash=item4644e199d0
Where’s the fuse for the amp?
How does this look on the tungsten pearl or Starfire pear. Does it go together well?
It looks nice but if you go with the red ones not the black ones.
@@SimpleSickBuilds oh, I just bought the smoked ones. Hopefully I can return them if I don't like them
do you have a link for your tail lights
Unfortunately i can no longer find the link to the same ones i have sorry but i got them on ebay
@@SimpleSickBuilds are they vlands or another brand
They are another brand not vland
Mines came with 4 wires, I ordered them on eBay ijdm ones with black white red and yellow not sure how to wire it
Is the green one a signal light wire ?
whats your wheel fitment?
Its 18x9 30 offset.. tires are 225/35/18
👍🏽😀👍🏽
Why do you talk like you are about to some some seizure attack?
Bitch!
Bp what’s up you guys cross eyed