Hello Sir. Can you tell me about your analysis. When you integrate the DG at the system, why do not divide with the base value. Can you please tell me about that. And also tell me the DG sizes are in MW. Thank you
Please sir do you have source code or a guide on how to implement this to determine the optimal operation of DG on Standard IEEE 33-radial distribution system using Matlab
hi sir/mam, nice presentation.....how the DG location is identified....also GA implementation.....it is very useful for the demonstration....u have done a great job sir.... Iam faculty from AP....thank you again....
Sir/Madam, Is it possible to get the code for all the cases for better understanding and implementing the same on IEEE 30 bus system. Nicely compared and explained if it was with voice it should have been understood very easily. Nice work. Thank you.
NICE explanation thanks sir can you send the MATLAB code this code help me for optimal placement of recloser and sectionalize switch in distribution system for my thesis
NICE explanation sir, Awesome work can you send the MATLAB code this code help me for optimal placement of isolator and sectionalize switch in distribution system for my thesis
Please sir do you have source code or a guide on how to implement this: ABC to determine the optimal operation of DG on Standard IEEE 34-radial distribution system using Matlab
thank you for your helpful video ,may you send me guide on how to implement this: ABC to determine the optimal operation of DG on Standard IEEE 34-radial distribution system using Matlab too, ahmedmohammed20255@gmail.com thanks
Please sir Do you have source code or a guide on how to implement this: the optimal location and sizing of DG on Standard IEEE 14-distribution system using Matlab
Sir ,if you have any guide to implement this source code for optimal location and sizing of dg on standard ieee 14 distribution system , please provide me.
simulationtutor.com/optimal-location-and-sizing-of-distributed-generation/
Sir You did not divide the DG value by base value? can you explain by code as there is no conversion in load flow also
Nice explanation... Thank you
thanks.
And additionally do you have some dg allocation code for p2g system? Very thankful !!
Sent.
Well explained. Can i get the code with 1 DG, 2 and 3DG's?
simulationtutor.com/optimal-location-and-sizing-of-distributed-generation/
dear sir, do you have an examples of solving cost generation by OPF algorithm in MATLAB of IEEE 14 Bus System.
your email?
@@SimulationTutor Sir I required IEEE 14 bus system matlab code
My email id is rraiyani909@rku.ac.in
Thank you
Hi ... I need the MatLab file for the ieee14 bus system for load shedding with time delay communication trip relay.
Your email. I have done similar work too
@@SimulationTutor Plz help to obtain all requirement. muyizeredarius@gmail.com
Hello Sir. Can you tell me about your analysis. When you integrate the DG at the system, why do not divide with the base value. Can you please tell me about that. And also tell me the DG sizes are in MW. Thank you
In the loadflow file, the DG value converted into PU by dividing, base value.
Yes in Mw
can u help me
@@sarmedal_bakri5751 contact@simulationtutor.com
@@SimulationTutor i need email?
contact@simulationtutor.com
Hello sir, pls can I get a copy of the code? Also do you have anything about using Tabusearch for this same problem?
Your email?
Ayobabz07@gmail.com
@@habeebayodejianibaba2685 bro...can u send the Matlab code....Mail id:naveenkumar.a2089@gmail.com
Could you give some code about this with PSO algorithm? And for the ieee33 system?? Thanks!!
can you help me with the MATLAB code for PMU placement on IEEE 14 bus
yes I can, your email?
@@SimulationTutor Divineogbe@gmail.com thank you
Can you send me this too? PMU Placement! Thank you ... Yboudhaouia@gmail.com
@@SimulationTutor Can you send me IEEE 14 Bus Optimum location and sizing of DG matlab code
Email : renishraiyani1997@gmail.com
Thank you
Dear Sir, will you have an example for the location of BESS in microgrids in matlab?
your email?
@@SimulationTutor tavo66@hotmail.com
@@dr.gustavoperezhernandez1251 sent.
do u have code ?
I am trying to locate BESS for frequency regulation.
Dear sir. In this case, what is the Fitness Value, the Genes, and the Population? can you define each one of them?
It is very nice work !This tutorial is very nice .can i get the full code OF optimal placement of D FACTS AND DG?
contact@simulationtutor.com
dear sir, do you have an examples of solving optimal location and sizing of dg using mais or ais?
contact me by email
Mraza.engg@gmail.com
@@SimulationTutor sir please send this code to tilak.gudapuvalasa@gmail.com
Nice presentation sir
Thanks.
Great work!. Can i get the code with GA for optimal power flow analysis with IEEE-30 bus system? It'd greatly help me with my thesis!
contact@simulationtutor.com
do u help me ?
Sir, do you have code of three phase system load flow analysis with dynamic load for voltage unbalance
Email?
Please sir do you have source code or a guide on how to implement this to determine the optimal operation of DG on Standard IEEE 33-radial distribution system using Matlab
Yes exactly.
Excuse me Sir. what if this Matlab code is used in radial system like IEEE 33Bus, may i use it for that case ? Big thanks,,,
yes.
@@SimulationTutor thanks.. what is the method in code used for load calculation ,Sir ?
@@diproject6152 NR
@@SimulationTutor thankssss
hi sir/mam, nice presentation.....how the DG location is identified....also GA implementation.....it is very useful for the demonstration....u have done a great job sir.... Iam faculty from AP....thank you again....
can you please send me the code on suman4u321@gmail.com
Hello, sir. Do you have code using pso for this problem?
Available, Email?
Excellent work.
How can I use solar DG in this case? Help please.
Email?
abbasrex70@gmail.com
Sir/Madam, Is it possible to get the code for all the cases for better understanding and implementing the same on IEEE 30 bus system. Nicely compared and explained if it was with voice it should have been understood very easily. Nice work. Thank you.
Email?
Can I get the code of Ieee 33 bus system thanks great explanation
@@manishamalik2579 hi .. are you get the code of 33 bus ? If you get it , can you share it with me ? Thanks
Really nice work... Sir how to download it pls provide code
Really nice
NICE explanation thanks sir
can you send the MATLAB code this code help me for optimal placement of recloser and sectionalize switch in distribution system for my thesis
Email?
I want to know how which is the best algorithm for reliability improvement in distribution side using DG sets
Email?
rajkumarkarki628@gmail.com
I need also
Hello Sir ...Can I get this model and code?
please sir it is very helpful for my project work.
Please contact us on email.
nice sir! can you have code for IEEE 33 bus system using same algorithm? if you have,can you provide?
simulationtutor.com/
NICE explanation sir, Awesome work
can you send the MATLAB code this code help me for optimal placement of isolator and sectionalize switch in distribution system for my thesis
contact@simulationtutor.com
could you give some code about this with genetic alghoritm? and for ieee 33 or 69 bus system?🙏🏼
simulationtutor.com/
Hello sir,
Please provide the Matlab code of this video.
sent.
@@SimulationTutor please send me code>(shutari2000@gmail.com)
Can you send me IEEE 14 Bus Optimum location and sizing of DG matlab code if possible with integration of EVCS.
Email?
hello Sir ...
Can I get this model and code?
please sir
Your email?
@@SimulationTutor
ma663250@gmail.com
thank you
@@SimulationTutor Sir, could you also send the code to my email?
inverso.12@gmail.com
Thank you in advance!
@@SimulationTutor Sir I want this code please
@@mohamadali1615 could you send me code please
Good job and nice explanation,
please can i get the code?
Email?
@@SimulationTutor nagaraju1753@gmail.com
Could you please send me this code to nagaraju1753@gmail.com
Hello please send the matlab code for IEEE 14 BUS
Your email?
@@SimulationTutor kirancricket98@gmail.com
Check email
@@SimulationTutor thank you sir
sir please upload matlab code on Optimal Storage Planning in Active Distribution
Network Considering Uncertainty of Wind
Power Distributed Generation
I have using wind.
Nice video. can you send a copy of the MATLAB code for this implementation?
Email?
@@SimulationTutor please send on gamma2051@gmail.com also
@@SimulationTutor nagaraju1753@gmail.com
Sent.
please mail me
Do you code for 9 bus IEEE system sir?
Yes, send me email.
Thanks Sir
Can anyone send me a code for optimal placement capacitors for power factor correction using genetic algorithm or pso?
contact@simulationtutor.com
sir can you please send me the source code that is attached to the matlab
contact@simulationtutor.com
Please refer the reference of research paper.
WHERE IS THE OBJECTIVE FUNCTION DEFINED IN YOUR CODES SIR ????
simulationtutor.com/
Sir, Very helpful videos. Can you send me the MATLAB code please
Email.
sir yet I didn't get the code
contact@simulationtutor.com
Hi sir can you help me with my these, please?
contact@simulationtutor.com
hello sir thank u for the video, can you send me the MATLAB code for IEEE 33 distribution system implementing the same algorithm please??
cres.magar1925@gmail.com
Sent
@@SimulationTutor could you please send me code to nagaraju1753@gmail.com
can you please sent the ieee 33 bus sys using the same algorthim
@@SimulationTutor
Can you send me IEEE 33 Bus Optimum location and sizing of DG and Electrical vehicle charging station matlab code
hey bro do you have any luck? im currently writing my paper with regards to this too but havent had any progress
Email?
@@SimulationTutor hello could you please send it to me too kessam92@gmail.com thanks very much and perfecttt video
Please share the code for 33 bus bus optimum location and sizing of dg🙏🙏
sableashay9@gmail.com
Sir please can I get the source code?
contact@simulationtutor.com
Please send me matlab code i want to implement for three different power generating units.
sent
pls my frined can you send me the Matlab code I need it very much
my email ( talib1979@yahoo.com )
kindly send it to me at (mahsanraza164@gmail.com)
Dear sir, could you please send me the source code and explanation about this topic.
Email.
Sir, why im not audible
some videos have audio too.
Hi sir, can you please give all these source code
Contact@simulationtutor.com
voice not coming
sir please provide the code. i have sent an email as well
Check email.
Bro can u send the code?...my mail id:naveenkumar.a2089@gmail.com
@@SimulationTutor sir...pls send the Matlab code...mail id:naveenkumar.a2089@gmail.com
simulationtutor.com/optimal-location-and-sizing-of-distributed-generation/
hello sir please send me the matlab code for IEEE 14 BUS
Your email?
shankar.gce95@gmail.com
IEEE5 BUS ALSO UPLOAD PLEASE
Thanks for comment, I will try to add.
@wjdan alzwi your email?
Can you send your code?
Email.
sir please upload flow_cal matlab file...
ashutosh barik your email?
Your email?
Your email.
harshmaurya38@gmail.com can you send me too please on this mail ?
Sir... Please send this coding through the email id- gsaravana116@gmail.com
optimal location and sizing of 2 DG and 3 DG
simulationtutor.com/
The video has no sound
Check the recent videos.
@@SimulationTutor I'm working on optimal placement of DG. this is the video that seems to explain the working of the code, there is no sound however.
@ceedy3817 Check recent videos, with sound.
I cant hear your voice
Audio Explanation Available. Watch video
ua-cam.com/video/FQ08i5AAWG8/v-deo.html
please share this code with me
contact@simulationtutor.com
Please sir do you have source code or a guide on how to implement this: ABC to determine the optimal operation of DG on Standard IEEE 34-radial distribution system using Matlab
Yes available, Email?
iuchiroma1@gmail.com
sent.
thank you for your helpful video ,may you send me guide on how to implement this: ABC to determine the optimal operation of DG on Standard IEEE 34-radial distribution system using Matlab too, ahmedmohammed20255@gmail.com
thanks
Please sir
Do you have source code or a guide on how to implement this: the optimal location and sizing of DG on Standard IEEE 14-distribution system using Matlab
Email?
Sir ,if you have any guide to implement this source code for optimal location and sizing of dg on standard ieee 14 distribution system , please provide me.
Email?