Apple Watch Battery Replacement Series 3 LTE Cellular No Power Bad Screen Repair
Вставка
- Опубліковано 18 жов 2024
- Genuine Apple Watch Battery - bit.ly/2weL6MB
Send in your unit for repair: bit.ly/2nJgG18
You can click the zero calorie link below to send your electronics in for repair:
www.joesge.com...
Apple Watch Series 3 replacement:
1. Remove Apple Watch Series 3 screen bit.ly/2JzsCLv
2. Unscrew screw on Taptic engine
3. Pry up the left side cover on the Taptic engine
4. Unplug all connections under the cover
5. Remove the battery connector
6. Remove the battery from its place
7. Put in new battery
8. Put unit back together
Feel free to reach out to our radical animal friendly support team with any questions your brain has developed during the watching or pre gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)
If you are tired of pre gaming or talking with our radical animal friendly support team, and find yourself pondering the meaning of electronics as a whole, you can ponder them deeper by checking us out on these platforms for social-ish activity:
Snapchat @joesge
Instagram @joesge
Facebook @joesge
-
JoesGE.com is a pretty cool place (depending who you talk to it might be more than pretty cool. But hey, I'm just writing this down so that it says something down here, because that's more professional right?) and if you're still reading along at this point you might as well sit down and grab some popcorn because this is about to trail on about how we are this premiere repair service located in Washington State North of Seattle in basically the "Armpit of the US" near Mt baker (Mt Baker has the world record for most snowfall at 1,140 inches in a season). Even though it can smell bad around here we love the fresh air and being near the post office and in a quiet sleepy mountain town certainly gives us much closer access to Team Turtle and Team Beaver (Watch our "Who, what, when and where is JoesGE?" video if you don't get the reference).
All this to basically say that we are all addicted to coffee and stay in the warehouse for ridiculously long hours in order to keep up with the demands of the youth for these two sided head audio devices and speakers that float when you throw them in the ocean or in your bathtub to test if they actually float. On top of that we do like it when less stuff ends up in landfills so we hoard everything on shelves with wheels so that we pollute less, it just sits in our warehouse loosing molecules slowly over time degrading to become smaller and smaller.
If you are still reading at this point you deserve an award, or a high five, or something because you must either be the most patient person on the planet, or you read blogs frequently. And if the latter is the case, then this whole thing must seem pretty short so lets keep going.
We do some really interesting things here at JoesGE which are frequently documented in our sometimes weekly sometimes never vlogs.
Also, if you are wondering how we keep up with the demands of the people so well, its because 90% of the people that work here are all Russian around getting things done most of the time. Yes, that was a pun, you are welcome. We hope you have a pun filled day, because who couldn't use a few laughs?
u never any adhesive under the new battery? will this cause the battery to wobble and shake ard?
No, the fit is very tight inside if you use the correct and genuine batteries
@@Joesge yo thanks for the reply, ik this vid is very old! 😇😇 helpful vid, plan to change the batt myself too
Is it true that often times when battery is disconnected from the device, it can cause the device to enter a non-responsive state such as no touch ?
Thanks for the comment. The issue you are describing sounds like the actual screen is having the issue, if the unit powers on and charges the battery is not the issue most likely the issue is the screen. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
Russ C.
What about how to apply the glue to properly seal it?
Thanks for watching! We use a glue called B7000 to secure the watch screen back in place. Put a small line of the glue around the edge of the frame of the watch where the screen sits then attach the screen and hold it in place for 30 seconds, then clean off any excess glue from the outer edge of the watch. MD.
Taking off the screen is half of replacing the battery. Next!
Thanks for watching
you should really do the entire process start to finish with out the speed skips, so folks watching can see all the process, not just parts. this video is not to helpfull since the screen removal is not included most important, not a seperate vid which you claim, and the putting screen back on in speed mode doesnt help either as slowing the video clearly showes parts skipped in the screen resealing.
We will work on that for other videos.