E-014-00 or E-007-00 in Canon IR3300 | Fixing Motor Error | Gear Damage
Вставка
- Опубліковано 8 вер 2024
- Canon ir3300 E-014 Solutions
Code
E014-000
Description
After the fixing motor drive signal is generated, the clock signal does not arrive within 1.3 sec
Causes
The fixing motor (M19) is faulty. The DC controller PCB is faulty.
Remedy
1. Connector Is the connector of the fixing motor connected? NO: Connect the connector. 2. Main power supply PCB Is the drive voltage (24 V) of the fixing motor supplied by the main power supply PCB? Main power supply PCB: between J202-3 (24VU1-S) and J202-4 (OVU1) NO: Replace the main power supply PCB. 3. Fixing motor (M19), DC controller PCB Press the Start key. Is the lock signal of the fixing motor present at the connector (J312) on the DC controller PCB? Lock signal: J312-B4 (FSRM_LOCK*) the DC controller PCB change from 0 to about 5 V? YES: Replace the fixing motor. NO: Replace the DC controller PCB.
Code
E007-0000
Description
An error in the rotation of the fixing film is detected.
The reading of the main thermistor is 100C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven
Causes
The fixing film sensor (PS45) is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER=FUNCTION=CLEAR=ERR
Remedy
1. Wiring Are the wring and the connectors connected securely? DC controller PCB (J311) = relay connector = fixing film sensor NO: Connect the wiring and the connectors. 2. Fixing film sensor Check the fixing film rotation signal.When the fixing motor is rotating, is the film rotation detection signal sent by the fixing film sensor to the concoctor J311 of the DC controller PCB? Film rotation detection signal: 5V pulse signal between J311-A9 (FILM_ROT_D) and J311-A8 (GND); at intervals of 100 msec ON and 440 msec OFF NO: If the fixing film is normal, replace the sensor. 3. Fixing film unit, DC controller PCB Is there a fault in the fixing film edge rotation detection mechanism? YES: Replace the fixing film unit. NO: Replace the DC controller PCB.
Any quer ask or comment
officialzigzagbaba@gmail.com
Thanx alot... frm east africa
Thanx for feedback
Thanks, Problem solved.
Thanx for feedback
my ir3300 canon machine get restart again and again can you tell me what is the problem, mechanic said it is power supply or HVT board problem help me in this matter
Sar koi bat nahi That's all Right
Thanx for feedback
Chirag sir nice video
Thanx for feedback
Thanks
😀
Sir drum Unit se toner lik hora please iska 1video banavo sir
ir 3300 ka Fixing Motor kitne me ata he in pune
Sir plz canon ir 400 ka gearbox fix kerke dekhao
Experience nay ita iska
Getting E014-001 on a IR5250, can you help, please!
Ir5250 experience ny hai
सर् मेरी फोटोकॉपी मशीन की फ्रंट कवर की मैगनेट खराब हो गयी है,जिससे वो कवर बंद नही होता है। मॉडल canon ir 3300 है। प्लीज इससे रिलेटेड वीडियो बनाये थैंक्स।
Magnet change kijiye koi paRTS toota hai feviqiuk
Sar Good Evening mere cannon 3300 machine me A4 (1st)tray me print thoda tircha ho raha hai Please koi solution Healp me
Bina dekhe idea nay aayega
Hello Bayya.. 3300 mechine me 2 r 3 print diyo tho 1st paper sahi bahar aare.. 2nd paper heter section se thodasa upper aake jam ho rahe he ..kya problem hai jiska... Solution bolo na please
Try COPIYER>FUNCTION>clear>dc-cn>ok
Restart machine on off
👌👌
How to remove 585 problems all sensors are cleaned but problems not solved.
Isme gear change Karna पड़ता है या सिर्फ ओपन करके लगा देना पड़ता है
Gear sab clean karo. Sensor clean karo. Fir bhi n fir open kar try clean sensor & gear... fir bhi nay hi raha to pehle sensor fir jake gear
@@ZigZagBaBa ye karne ke Baar bhi e000014-000 as raha hai
IR 2002 stepping motor kaha milega bhai...online milega? kindly help
Ir2002 k experience nay
may bol raha hu ir 400 xerox machine me front cover close hai. but screen pe likha a raha hai close front cover how to do ?
Vaha cover top left side clip check kijiye
@@ZigZagBaBa matlab ache se bolo
Daye taraf se jo clip cover se dabata hai vo check karo..
very nice video please make further videos thanking you your doing ir3300 ka videos
Thanx for feedback
Part 2 ua-cam.com/video/DbfKFLv2Ij8/v-deo.html
Sir stake bypass me printout image cut ho jati hai please uski setting ka tarika bataye
I will try it make video
3300 error code come after making 300 copy then i stop machine 10 miit after 300 copy again error 014 is ka kiya problem hay aise hi on off karte raho aur chalte rahete hay is ke liy e kiya kare
E014-000
Description:After the fixing motor drive signal is generated, the clock signal does not arrive within 1.3 sec
Causes:The fixing motor (M19) is faulty. The DC controller PCB is faulty.
Remedy:1. Connector Is the connector of the fixing motor connected? NO: Connect the connector. 2. Main power supply PCB Is the drive voltage (24 V) of the fixing motor supplied by the main power supply PCB? Main power supply PCB: between J202-3 (24VU1-S) and J202-4 (OVU1) NO: Replace the main power supply PCB. 3. Fixing motor (M19), DC controller PCB Press the Start key. Is the lock signal of the fixing motor present at the connector (J312) on the DC controller PCB? Lock signal: J312-B4 (FSRM_LOCK*) the DC controller PCB change from 0 to about 5 V? YES: Replace the fixing motor. NO: Replace the DC controller PCB.
Kya kiya konsa gear badla kuch pta nahi kholkar vapish feet kar diya ?
Cannon 3300adf not moving paper what problem sir
Bhai 3300 model me mashain chalu he magar screen band he kiya problem he
Power dikhaya raha ?
3300ir me copy print matter double aa raha hai, koi solution batao
Sir meri canon 3235 hai jisme fixing unit ke upar akar paper fas raha hai aur jab paper nahi jam rahta tab bhee paper jam dikhata hai kripya iske bare me kuch bataye
Vaha jo senser usse clean kijiye yaa change kar dijiye
Baba... jab may ek dark density badata hu to background dark aata hai... any soultion plz???? mere pass canon ir 3300 machine hai.
Density mat change karo.. development jake change kijiye
A4 mein mai print deta hun tab paper 4,5 paper nikal ate hai sir. Aur Mai pick up rubber bhi change kara sir phir b wohi problem hora hai
Ek baar paper change kar dekhiye.. matlab dusri quality yaa brand try kijiye... may be get solution
Mai B2B USE karraha hou Bhai
Aur dusre company ka paper bhi change kiye hou
Phir bhi same problem hai bhai
Pickup rubber k pi6e black color ka gear change kark k dekho..
thanq
Abhi hal me RC zerox machine nahi mil rahe hai. Me gujarat se hu . Mujhe zerox machine kharidna hai. Aap kuch madad kar sakte hai...
Kya ir3300 me scan to pendrive me kaise kare ek video banaye
Try karo surat city me mil jauegi yaa fir jao mumbai vaha definately mil jayegi... yaa fir india mart website pe jaye vaha lots off wholesale vale vaha mil jayegi...
ZigZag BaBa surat me koi address
See india mart website
Canon 405 ki error ki problem h e014
Is the problem interrmittant or comes up every time when you turn the copier on?
You'll need to remove the fuser from the copier and inspect it to see if it is binding up making it difficult for the fuser drive motor to turn it. Lubricate any gears thet are gummed up and not turning well. Pay special attention to the swing plate assy. Also check for frozen bearings,flat spots on lower fuser roller, or anything else that can restrict fuser movement.
If that doesn't fix it - you may need a new motor - but that is almost never the case.
Fixing gear change karane k baad platform Puri tarah uper nahi ho raha hai kaise kare
Sir repairing Ke liye suggested kr sakte HI kya
Ny
@@ZigZagBaBa kya means hua sir
Service provider aas pass ho usse contact kijoye
sir mere machine ka print me one side dell aata hai koi selution do
Toner install functions use kro see video ua-cam.com/video/6JI9irAVY-Y/v-deo.html
Paper not load. pls solved this problem
thezigzagbaba.blogspot.com/p/canon-ir3300-paper-jam-solution.html?m=1 see last one video
the error e602-001 is coming what to do in canon 3300
Hardisk issue
Sir mera canon ir 400 machine problem is every time saying close the front door
Door k left side uper k side vaaha k hook check kijiye
Muje koi hook nahi dikraha hai kindly share the video
Left side uppar side magnet just pass me check kijiye
I want some repair videos on xerox 5855/65/75
Xerox 5765/75/90
I have no machine model.. also no experience
Sir canon3300me pepar Balck pega aa raha hai
Bhai paper tray me se paper nahi utha ri machine pick up tyre change kiye fir bhi nahi ho raha hai
ua-cam.com/video/gXxy75z17pk/v-deo.html
Hi dosth Canan 3300 ir print good but copy paper down ma black aara thoda copye ma kam thodya copey mA ziyada aara apka namber milsakta ha amount phone pay kardov ga apki help chaheya
ir 3300 E000007-0000 ye error aa raha hai. Fuser film naya dala hai, heater filament bhi naya dala hai, motor bhi change karva li phir bhi 007 error de raha hai
solution please
E007-0000
Description
An error in the rotation of the fixing film is detected.
The reading of the main thermistor is 100C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven
Causes
The fixing film sensor (PS45) is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR
Remedy
1. Wiring Are the wring and the connectors connected securely? DC controller PCB (J311) relay connector fixing film sensor NO: Connect the wiring and the connectors. 2. Fixing film sensor Check the fixing film rotation signal.When the fixing motor is rotating, is the film rotation detection signal sent by the fixing film sensor to the concoctor J311 of the DC controller PCB? Film rotation detection signal: 5V pulse signal between J311-A9 (FILM_ROT_D) and J311-A8 (GND); at intervals of 100 msec ON and 440 msec OFF NO: If the fixing film is normal, replace the sensor. 3. Fixing film unit, DC controller PCB Is there a fault in the fixing film edge rotation detection mechanism? YES: Replace the fixing film unit. NO: Replace the DC controller PCB.
Bhai ir 3300 E000007-0000 ye error bar bar aa raha hai. Fuser film damage thi wo bhi change karne ke bad 1 din acha chala fir bad me error dene lag gaya. Sabere jab machine start karte hai to 2 print aati hai uske bad error dene lag jata hai.
E007-0000
Description
An error in the rotation of the fixing film is detected.
The reading of the main thermistor is 100C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven
Causes
The fixing film sensor (PS45) is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR
Remedy
1. Wiring Are the wring and the connectors connected securely? DC controller PCB (J311) relay connector fixing film sensor NO: Connect the wiring and the connectors. 2. Fixing film sensor Check the fixing film rotation signal.When the fixing motor is rotating, is the film rotation detection signal sent by the fixing film sensor to the concoctor J311 of the DC controller PCB? Film rotation detection signal: 5V pulse signal between J311-A9 (FILM_ROT_D) and J311-A8 (GND); at intervals of 100 msec ON and 440 msec OFF NO: If the fixing film is normal, replace the sensor. 3. Fixing film unit, DC controller PCB Is there a fault in the fixing film edge rotation detection mechanism? YES: Replace the fixing film unit. NO: Replace the DC controller PCB.
Sir. cANNON IR 3300 EOOOO14-0000 ERROR CODE KAYA HAI solution kaya hai
dear sir mere machine model canon ir3320i he or uske display me sirf white screen aa arahi he tuch pad kam kar raha he copy bhi ho rahi he lakein usme kuch bhi dikhai nahi deta mera machin 3 din se band he to pl, uska solusution batao please
Display change kar do
@@ZigZagBaBa suki prise kini hogi
Approx 450+
sir motor ok hai but wire magnet pakad raha hai new wire kaise milingi our dale kaise
Contact near hollseller
how to remove 585 problems
bhai ir2220, 2 number tray jam hora he u se thik kai se kare
Pick up rubber check kijiye
ua-cam.com/video/DmbadtVtOZo/v-deo.html
See this video
YAAD MERA IR 3300 MAIN FIXING SIDE PAPAR FAS JATA HI GEAR MAIN CHKKAR CHANGE KIYA FIXING OK HI BUT PATA NAHHI KYA PORBLEM HE PLZ BATAVO YAA APKA MOBILE NO DO...
Bina dekhe idea nay aayega... vaha fixing pass senser aata use clean kijiye...
ਏਰਲ 0732
E00002-0000 error ka solution bolete sir ir3300 machine hai
: E002-0000
Description:The temperature of the fixing film is as follows:
has exceeded 100C, but does not reach 115C within 1 sec thereafter. has exceeded 140C, but does not reach 150C within 1 sec thereafter. has exceeded 160C, but does not reach 165C within 1 sec thereafter
Causes:The fixing film unit is faulty (i.e., the main thermistor TH1 has poor contact, or the fixing heater is faulty). The main power supply PCB is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>FCLEAR>ERR.
Remedy:1. State Turn on the power switch, and clear E002/E003. Thereafter, turn off and then on the power switch. Does the fixing heater operate? NO: See “The fixing heater fails to operate.” 2. Wiring Is the wiring from the DC controller PCB to the fixing film unit normal? NO: Correct the wiring. 3. Fixing film unit, DC controller PCB Try replacing the fixing film unit. Is the problem corrected? YES: End. NO: Replace the DC controller PCB.
canon 3300 error code 602 0001 solutions please or video ho to banavjo
Code
E602-0001
Description
A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
Causes
The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Agar apme sach me knowledge hai to please mujhe bataye error 0064 kaise thik hoga please must rep
E064-0000
Description
The presence of a high-voltage error is communicated by the composite power supply PCB (The output for primary charging, developing, or transfer has deviated from a specific level of voltage)
Causes
The contact has poor connection. The wiring is faulty. The composite power supply PCB is faulty. The DC controller PCB is faulty. proce
Remedy
1. Contact Is any of the contacts of the primary charging roller, developing assembly, or transfer charging roller soiled? Or, is there poor contact? YES: Clean the contact, and set it once again. 2. Wiring Is the wiring between the contacts for the following normal: DC controller PCB (J301), composite power supply PCB (J136), primary charging roller, developing assembly, transfer charging roller? a. DC controller PCB (J301) composite power supply PCB (J136) b. composite power supply PCB (J130-7) primary charging roller contact c. composite power supply PCB (J130-1) developing assembly contact d. composite power supply PCB (FT133) transfer roller contact NO: Correct the connection. 3. Composite power supply PCB, DC controller PCB Try replacing the composite power supply PCB. Is the problem corrected? YES: Yes. NO: Replace the DC controller PCB.
sir my 3300 is not working on inveeter
?
bhai yar meri machine me to fir bhi yahi error aa raha hai puri video follow ki uske baad bhi
contact service provider
Brother 00007 error repeat hora plz answer dijiye
E007-0000
Description
An error in the rotation of the fixing film is detected.
The reading of the main thermistor is 100C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven
Causes
The fixing film sensor (PS45) is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR
Bhaiya mera 3300 machine hai 000014 error aa raha hai
Fixing Moter ek baar ran karta hai bhir rukata hai fir error aajata hai Bhai saheb Kaya kare sare gair tik se run karte hai
Gear check karo.
Mere Canon ir 3300 me kabhi print banti hai our kabhi nahi arthat print blank aata hai
Please help
Drum check fisal raha hoga.. uske screeWS open kar k ek dum feet kijiye
m2 motor kis side hai
No idea
Are bhai error code e-00002-0000 to kya kre error clear karke bhi dekh liya but nhi ja raha hai and fixing nikalake puri saf bhi kar liya tab bhi nhi ja rha koi solutions hai to batao plese
Sir cannon ir3300 main error E000007-0000 kse solve kre.
canon Ir 2016 system error 540 problem solved please please
No experience ir2016
Sir 0010 error ah Raha Kya problem hoga . Ir3300
E010-0000
Description
After the main motor drive signal is generated, the clock signal does to arrive within 1.3 sec
Causes
The main motor (M2) is faulty. the DC controller PCB is faulty.
Remedy
1. Connector Is the connector of the main motor connected? NO: Connect the connector. 2. Main power supply PCB Is the drive voltage (24 V) of the main motor supplied by the main power supply PCB? Main power supply PCB: between J202-1 (24VU1-SW) and J202-2 (OVU1) NO: Replace the main power supply PCB. 3. Main controller (M2), DC controller PCB Press the Start key. Is the lock signal of the main motor present at the connector J308 on the DC controller PCB? Lock signal: J318-A10 (MM_LOCK) YES: Replace the main motor. NO: Check the wiring; if normal, replace the DC controller PCB.
sir 3300my 00014code mera hat ni raha ha motor gear change v kr diya ha phir v ni hata
Contact service providers
Motor cost kitna hoga
Sir ir3300 machine me 602 -001 error code aa raha solution please
E602-0001
Description
A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
Causes
The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Remedy
1. Wiring Are the connection and the cable between connector J1025 of the main controller PCB and the connector J2005 of the HDD normal? NO: Correct the connector/cable. 2. System software Try re-installing the system software. Is the problem corrected? YES: End. 3. HDD, Main controller PCB Try replacing the HDD, and download the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB.
Paper jam bata raha hai
Location
So what if you would speak a language that the rest of the world could understand??? It would be awesome
Hindi
error 0700 code arey flim change karne k bad bhi
E007-0000
Description:An error in the rotation of the fixing film is detected.
The reading of the main thermistor is 100C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven
Causes:The fixing film sensor (PS45) is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR
Bhai error e00000-000 bare me video bana dena
E000-0000
Description
The reading of the main thermistor does not reach 30C 1 sec after the main power switch is turned on. Or, it does not reach 70C 2 sec thereafter
Causes
The fixing film unit is faulty. The main thermistor has an open circuit. The fixing heater has an open circuit. The main power supply PCB is faulty. The DC controller PCB is faulty. To reset the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR.
thank you
602 0001 code solution plus. .
Code
E602-0001
Description
A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
Causes
The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
tell me bayya fixing motor cost
Depend on local market price
motor repair hotha hi
Jayatar change hi hota hai... second hand bhi mil jayega market mai..
error 514 000 solution
E514-0000
Description
At the start of the motor CW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON
Causes
The stack handling motor (M2) is faulty. The stack delivery lever home position sensor (S8) is faulty, the connector is disconnected, or an open circuit exits. The stack handling motor (M2) relay harness is faulty. The return roller is faulty
canon ir 3300 paper zada khicha rahi he
Pickup rubber change kardo
Bhai new motor buy kaisa kare or aapke mo. No. Do pls
Can't number share.. motor najdik wholesale market me mil jayegi
514 no
E514-0000
Description
At the start of the motor CW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON
Canon IR3520 main vi problem ho raha hai
?
@@ZigZagBaBa SIR CANON IR C3520 MAIN JAB ON KAR RAHA HON STORING INFORMATION...STORING MAY TAKE ABOUT 3 MINIUTES BOL RAHA HAI OR E000014-0002 THE PRINTER NEEDS TO BE CHECKED (CALL REPRESENTATIVE) AGAR AP BOLENGE TOH APKE MAIL MAIN SAVI IMAGE KE SATH VEJ DU ALL PHOTOS
E014-0001
Description:Error in Fixing Motor
The motor failed to rotate at the specified speed.
Remedy:1. Check the Fixing Assembly. 2. Remove and then install the Fixing Assembly. 3. Replace the Film Unit. 4. Replace the Fixing Motor. 5. Replace the DC Controller PCB (UN1).
@@ZigZagBaBa Sir can i send the pictures..? i can't understand what is Fixing Assembly
@@ZigZagBaBa where is canon C3520- Fixing motor