The converter that you didn’t know what it did is a DC to DC buck converter. Gas motorcycles have a 12 volt electrical system to run all the electronics (turn signals, headlights, blinkers etc). Some electric bikes have this converter to convert the battery voltage (50-67 volts in your case) down to 12 volts so that you can use generic motorcycle electric parts on your bike instead of having to buy specialty ones that work with higher voltages.
Looks so AWESOME!!! Nice Build, great Video!!! I just bought the ERide Pro SS 2.0. Ordered a 16 inch rear wheel with 60 tooth sprocket from Warp 9. Thinking that I should have ordered the 54 tooth one as the rear wheel goes from 19 to 16 inch... Do you think that a 60 tooth is too low for the gearing? I'm now afraid that it will be to witchy, hard to keep front wheel on the ground? anyway, interested in your thoughts with 54 toot rear sprocket. I'm not really interested in high speed so i want lots of low end for hill climbing and technical trails. Anyway, thank you! : )
@@Sherman1862 hey thank you I appreciate it🙏 I’d say you definitely did right thing with getting the 16inch rear rim it’s a night and day difference having that real dirt bike tire on their for trails and climbing fs! One of my best purchases was that but with looking at the specs on the eride it looks like that thing would be a torque machine out of the box😂 what size spocket is on their now? I feel like the 60 tooth would definitely make it super easy to bring that front end up witch would be fun on technical trails but might be easy to spin the tire out or pop the front end up on hill climbing but if your easy on the throttle you would grow into id think! I’m really liking my 54 tooth sporket but with my 6800 watts I’m pushing I have gotten to the point where I’m full throttling my trails and hillclimbs wishing I hade more top end speed but with your bike having more watts and top end out of the box I don’t think you’ll go wrong with either or!
Thank you glad it helps! I’m definitely thinking about it more but once I get a new battery I’ll have to get ride of the wrap and go with the color scheme I want but I like the wrap I want to soon though! I do have a razor mx650 I was going to do a 14kw kit build but might just finish the surron build instead now and trow the old surron parts in the razor
What do you think about the tusk stand? Pretty stable when jacked up high? Also what did you think after the first ride on the new forks on rough terrain? Were you blown away?
I’m really liking the tusk stand definitely a good purchase if you work on your bike definitely trust it when it’s jacked all the way up as long as the bike is tied down with 2 mounts! But yea first ride I was definitely impressed felt like a new bike went over rough terrain with ease👌
Yea I was thinking about it, but I still have a couple things I need to buy for it and I want all my blacks and everything to match perfect! But now I don’t have to worry about scraping it up scene’s for round 2 everything will be painted to match and then it will be complete
@@Bryce-00 mainly because when I built this I didn’t even know how to wheelie it and have been satisfied with it, then I aslo just put the 2023 surron x 34 amp battery, wave controller,power booster and a bigger sprocket witch added 1200 watts then the stock Segwayx260 battery/controller witch has been nice but know that I know how to wheelie and I’m use to the power I’m ready for the 72v system along with double brake and stuff!
@@Bryce-00 thank you I definitely have made improvement scenes I got the bike! And the Segwayx260 is $6,500 on their site at one point they got up to 7.5k when they where selling out quick, surprised they haven’t changed the price or adjusted it scene’s all these new e-bikes came out
Yea I definitely agree, regret it a little but I only notice it on top of the swingarm but iv already smashed the guard plate so that’s one up side is I don’t have to worry about scratching it up scens it will look new when I finally do get the matching paint theme!
I don’t haven’t messed with the adjustments to much but it’s been feeling great! I like my settings to be more stiff, but I think I went with that spring more because I have trailer for it
I hade this bike when it was complete. But the only place I know where you can get one is surronshop, I can get you a code to save some if end up getting one
Not sure if I understand your question, but yes it has titanium bolts (lighter and stronger then stock + look cool) and no it’s technically not a stock controller for this bike. it was a 1200watt upgrade compared to my stock Segway controller!
@@electric_things_ Thanks for the explanation! I'd definitely recommend prioritizing a new controller and battery - you're going to have a blast with the enhanced performance. Your rebuild was not only informative but also easy to follow. I've learned a lot from it. Keep up the great work!
@@phil.d6449thanks man I’m glad it’s helpful!I definitely agree with you on the power upgrades can’t wait to get them, definitely going to be the fastest thing I own!
Yea the bike needed it,couldn’t even handle the stock power and broke most the parts I upgraded! Did add 2,000watts from my stock Segway power train + bigger sprocket that definitely noticeable on the low end torque
@@Quickfr1 I definitely agree on the front plate it needs to be changed! The wrap is really glowing on me though I wanted it to be black with the wrap 9 burnt blue color as my color theme but the wrap in person looks slick but eventually I bet I’ll take it off or get a new one for my dream build color theme
Thank you! I’m not exactly sure it did take me longer because of filming but could be done in one session/day , but I think it took 2 hours to take it apart then I broke it down into 2 days around couple hours each so maybe around 10-12 hours I’d guess with filming!
How does this video not have more views? Good work on the build, bet it rides like a dream!
Haha thank you I appreciate it!
A masterpiece in every sense of the word .
Thank you 🙏
This was a dope build! I learned some new things from you🔥🔥🔥
Thank you, glade you got something out of it!⚡️🙏
Man that came out sick. Chill video and I like how you broke everything down on what you’re doing
@@klubhead7070 hey thanks man I appreciate it, Definitely not an exiting/ outgoing video but hopefully got a good idea on how it’s built!
The converter that you didn’t know what it did is a DC to DC buck converter.
Gas motorcycles have a 12 volt electrical system to run all the electronics (turn signals, headlights, blinkers etc).
Some electric bikes have this converter to convert the battery voltage (50-67 volts in your case) down to 12 volts so that you can use generic motorcycle electric parts on your bike instead of having to buy specialty ones that work with higher voltages.
Aww that makes scenes and good to know! Figured it was converting something to make the main power work
That thing you took out, I'm pretty sure is your GPS tracker.
could you drop the link for that wolf tooth headset or and specifications for the model
can put the url of the products?
pls
clicked off the quick one to hear you yapp brotha kep it up
Aye thanks brotha figured it would have been the opposite way around🔥
Great, Informative video!
Thank you!🙏
Please put links to all the parts in the description!
Why like it and not listen?
gz on1k. well deserved
Aye thanks bro I appreciate it!🔥
Looks so AWESOME!!! Nice Build, great Video!!! I just bought the ERide Pro SS 2.0. Ordered a 16 inch rear wheel with 60 tooth sprocket from Warp 9. Thinking that I should have ordered the 54 tooth one as the rear wheel goes from 19 to 16 inch... Do you think that a 60 tooth is too low for the gearing? I'm now afraid that it will be to witchy, hard to keep front wheel on the ground? anyway, interested in your thoughts with 54 toot rear sprocket. I'm not really interested in high speed so i want lots of low end for hill climbing and technical trails. Anyway, thank you! : )
@@Sherman1862 hey thank you I appreciate it🙏 I’d say you definitely did right thing with getting the 16inch rear rim it’s a night and day difference having that real dirt bike tire on their for trails and climbing fs! One of my best purchases was that but with looking at the specs on the eride it looks like that thing would be a torque machine out of the box😂 what size spocket is on their now? I feel like the 60 tooth would definitely make it super easy to bring that front end up witch would be fun on technical trails but might be easy to spin the tire out or pop the front end up on hill climbing but if your easy on the throttle you would grow into id think! I’m really liking my 54 tooth sporket but with my 6800 watts I’m pushing I have gotten to the point where I’m full throttling my trails and hillclimbs wishing I hade more top end speed but with your bike having more watts and top end out of the box I don’t think you’ll go wrong with either or!
Warp9 is lookin good
Thank you🙏
amazing build and super helpful!
when are you going to upgrade the battery controller and motor?
Thank you glad it helps! I’m definitely thinking about it more but once I get a new battery I’ll have to get ride of the wrap and go with the color scheme I want but I like the wrap I want to soon though! I do have a razor mx650 I was going to do a 14kw kit build but might just finish the surron build instead now and trow the old surron parts in the razor
What do you think about the tusk stand? Pretty stable when jacked up high? Also what did you think after the first ride on the new forks on rough terrain? Were you blown away?
I’m really liking the tusk stand definitely a good purchase if you work on your bike definitely trust it when it’s jacked all the way up as long as the bike is tied down with 2 mounts! But yea first ride I was definitely impressed felt like a new bike went over rough terrain with ease👌
@@electric_things_ Awesome. Thanks man.
make sure you put the bump stops on the forks so they don't scratch against the frame
@@Maverick31535 definitely, mine didn’t come in the box but ext put them on when I took it to the shop cuz valve was ruined
@@electric_things_ good because you don’t want to be spending that much money on forks to get them ruined right away.
Should have got flat black frame spray paint and painted the frame so it looked new before doing all that.
Yea I was thinking about it, but I still have a couple things I need to buy for it and I want all my blacks and everything to match perfect! But now I don’t have to worry about scraping it up scene’s for round 2 everything will be painted to match and then it will be complete
Can you drop a link for the stand you were using?
Yea I’ll go look for it! I just got it from Rocky Mountain atv think it was called the scissor lift
Why stock controller battery and motor?
@@Bryce-00 mainly because when I built this I didn’t even know how to wheelie it and have been satisfied with it, then I aslo just put the 2023 surron x 34 amp battery, wave controller,power booster and a bigger sprocket witch added 1200 watts then the stock Segwayx260 battery/controller witch has been nice but know that I know how to wheelie and I’m use to the power I’m ready for the 72v system along with double brake and stuff!
@makes sense, hope you get better at wheeling
@ also how much does the Segway cost
@@Bryce-00 thank you I definitely have made improvement scenes I got the bike! And the Segwayx260 is $6,500 on their site at one point they got up to 7.5k when they where selling out quick, surprised they haven’t changed the price or adjusted it scene’s all these new e-bikes came out
@ oh ok, how many volts is it?
broo you should of poweder coated your ron since you already had it disasembled
Yea I definitely agree, regret it a little but I only notice it on top of the swingarm but iv already smashed the guard plate so that’s one up side is I don’t have to worry about scratching it up scens it will look new when I finally do get the matching paint theme!
Where did you get the frame from
This was a complete Segwayx260 that I stripped down to the frame for this video!
Do you regret going with the 550lb spring?
I don’t haven’t messed with the adjustments to much but it’s been feeling great! I like my settings to be more stiff, but I think I went with that spring more because I have trailer for it
I'm in the midst of doing the same thing - an 80v, 25kW frame-up build from scratch. Thanks for posting this and the shorter version, it's helpful.
That’s sounds like a fun build fs! Does 80v have better specs vs the 72v? And thank you glad it’s helpful in some way!
@@electric_things_ as always, more volts = more fun!
@@CoolWattshaha sounds accurate!⚡️
Where did you buy the wrap from?
I just got it on the warp 9 website!
no way u didnt powder coat the frame or paint it before you put it together tho
It’s true I did not🥲 haha round 2 she will get the matching paint theme
Where did you buy that frame?
I hade this bike when it was complete. But the only place I know where you can get one is surronshop, I can get you a code to save some if end up getting one
Titanium bolts and stock control?
Not sure if I understand your question, but yes it has titanium bolts (lighter and stronger then stock + look cool) and no it’s technically not a stock controller for this bike. it was a 1200watt upgrade compared to my stock Segway controller!
@@electric_things_ Thanks for the explanation! I'd definitely recommend prioritizing a new controller and battery - you're going to have a blast with the enhanced performance. Your rebuild was not only informative but also easy to follow. I've learned a lot from it. Keep up the great work!
@@phil.d6449thanks man I’m glad it’s helpful!I definitely agree with you on the power upgrades can’t wait to get them, definitely going to be the fastest thing I own!
Where did you get the frame from?
I actually hade this bike when it was complete, but the only place I know where you can get one is at surronshop!
You spent almost 4K on parts and didn’t do power upgrades???
Yea the bike needed it,couldn’t even handle the stock power and broke most the parts I upgraded! Did add 2,000watts from my stock Segway power train + bigger sprocket that definitely noticeable on the low end torque
It would look better with a odi plate not as wide bare and no wrap
@@Quickfr1 I definitely agree on the front plate it needs to be changed! The wrap is really glowing on me though I wanted it to be black with the wrap 9 burnt blue color as my color theme but the wrap in person looks slick but eventually I bet I’ll take it off or get a new one for my dream build color theme
Warp 9*
Yea it looks awesome either way it's your bike so leave it be if you like it but sick build
What do you do for a living bro?😂
The LBX desperately needs a gear box.
@@shockadellick what are the some advantages on that? I was liking how simple it was to remove the chain but the gearbox looks nice
@@electric_things_
1. reliability
2. less noisy
3. 100 x less service
You exhaust your viewers bro
Yea I’m workin on it!
Ты лучше купи хороший комплект ключей для ремонта своего байка , и покрась его ))
What do you mean by good set do they make better aftermarket ones? Paint job definitely in the future👌
@electric_things_
• 3 ч I mean, it would be nice to work with a good tool ) it's always nice to have good wrenches at hand, bro ❤
🫡
@@Victor-tm2kl 🫡🫡
Great vid, how long did it take you to build it that day from start to finish?
Thank you! I’m not exactly sure it did take me longer because of filming but could be done in one session/day , but I think it took 2 hours to take it apart then I broke it down into 2 days around couple hours each so maybe around 10-12 hours I’d guess with filming!
@@electric_things_ oh nice wassup, you got skills!! 💪
where did you bought the parts from?
Where did u buy a frame?
This was a complete Segwayx260 that I built up but the only place I know you can get one is surronshop!
@@electric_things_ okay sure ima look at it later