This is the maxton design front lip for the W205 amg line bumper.
КОМЕНТАРІ •
Рік тому
In terms of the durability of the material, does it have good resistance? How is the leap installed underneath so it doesn't get damaged against the rocks? Can you share a current video of the spoiler itself and send a link in the comment reply? I'm considering adding some maxton accessories to my class a250.
Hi bro nice and clean finish very useful Video. Could you pls let me know the link to buy the glossy Black wrap sheet the exact size that your using on the Video. Thanks From germany
I got the exact same splitters from max design but screwing it looks very complicated, did u use the nuts and bolts that came with it ? And how did u do it cos there is a cover underneath as well. Thanks
Hi I had to use my own bolts and nuts, they were a bit longer than the ones provided, as the ones provided aren’t long enough to go through the plastic covers and bolt on, you need a bolt long enough to go through the plastic cover and place the bolts on the hollow areas where you can easily tighten the bolts
Good luck bro a little scrape and you will be picking up bits of plastic all the time also material is a little shit cus it goes blue from places if it even touches abit anywere i have it on mines aswel looks good
It was quite difficult to wrap with the pieces on the car, in hindsight I should have removed the pieces from the car to make it a lot easier, over time the stone chips showed the metal through the wrap, so I have now changed the pieces all to a gloss black piece instead of the chrome
@@skywalker5489 not 100% sure, the c43 has wider arches so don’t know whether that makes the bumper wider, I assume though it may be compatible, best to ask the seller though
In terms of the durability of the material, does it have good resistance?
How is the leap installed underneath so it doesn't get damaged against the rocks?
Can you share a current video of the spoiler itself and send a link in the comment reply?
I'm considering adding some maxton accessories to my class a250.
Just like to ask if you drill a hole under the car as well? Probably a silly question 😬
How did you not remove the plastcover? Mine hade a plastcover that i moste likely have to remove
Hi bro nice and clean finish very useful Video. Could you pls let me know the link to buy the glossy Black wrap sheet the exact size that your using on the Video.
Thanks
From germany
Thanks mate
Damnn sick! Yo Emi why you always wearing the freshest kicks while working on your car? 😂
Hahaha these are all my beater trainers 😂
@@LifeOfEmi 😂😂 💯💯
Link?
I got the exact same splitters from max design but screwing it looks very complicated, did u use the nuts and bolts that came with it ? And how did u do it cos there is a cover underneath as well. Thanks
Hi I had to use my own bolts and nuts, they were a bit longer than the ones provided, as the ones provided aren’t long enough to go through the plastic covers and bolt on, you need a bolt long enough to go through the plastic cover and place the bolts on the hollow areas where you can easily tighten the bolts
@@LifeOfEmi thanks bro, keep up the good work! Once grill is done maybe u wanna do a video on side skirts and diffuser or rear side splitters lol😎
@@sadiahmed689 thanks bro! When I get fitting it all I’ll defo make a video, stopping the spending on mods for a short while but will come soon!
Good luck bro a little scrape and you will be picking up bits of plastic all the time also material is a little shit cus it goes blue from places if it even touches abit anywere i have it on mines aswel looks good
Hahaha I’m going to be careful with this one 😂 I’ll see how it stands up over time, wasn’t too expensive for it to be replaced 😂
NICE! Where did you purchase the wrap from?
MDP supplies
Was it easy to wrap? How long did it take to wrap?
It was quite difficult to wrap with the pieces on the car, in hindsight I should have removed the pieces from the car to make it a lot easier, over time the stone chips showed the metal through the wrap, so I have now changed the pieces all to a gloss black piece instead of the chrome
@@LifeOfEmi hi mate i want to change that part also on my car. Was it easy to remove
Clean finish mate. Where did you purchase the splitter from? Probs do this mod to my w205
Thanks man! And from eBay it’s the maxton design splitter, or can get it from their website too
@@LifeOfEmi got the same one in my cart right now just need to make sure it fits 2017 c43 amg coupe. do you know? thx in advance
@@skywalker5489 not 100% sure, the c43 has wider arches so don’t know whether that makes the bumper wider, I assume though it may be compatible, best to ask the seller though
@@LifeOfEmi thx for replying bud. and will do
Does the splitter fit a 2016 c300?
CNt believe you joined the vinyl. That should of gone on in one piece
The spliter is in 3 parts
What grill are you planning to get?
Possibly the e63s style grill, still in two minds about the panamericana grill
😍
Hahaha safe bro!
Can you remove the maxton badge from it?
I tried, it seems very well glued on so didn’t try too hard, but I think it can be done with a bit more force
@@LifeOfEmi thanks bro appreciate it. I read online it can be removed as it’s just a gel sticker. Think it looks better without the badge.
Yes !
@@benz-life6062 just removed mine just peeled off, looks much better now :-)
Is the maxton sticker in the middle of spoiler removable
No :(
You do realize that there is a t in the word splitter not splia
@@tlynnzx1a northern accent for you 🥲
The Chrome original piece looks way better than the so-called upgrade