Це відео не доступне.
Перепрошуємо.
Reset ESP development Boards to default
Вставка
- Опубліковано 18 сер 2024
- #ideas #howto #tutorial
Learn to reset ESP development boards including ESP32 and ESP8266 to default.
Invitation Link to join my Exclusive membership:
/ @kian.smarthome
ESP Web Flasher:
nabucasa.githu...
USB to UART Drivers:
www.silabs.com...
ESP Bin Files:
www.espressif....
You can SUPPORT me by sending Tether(TRC20) to my Wallet:
TWYW9vhcTtwWFQJWzhKrGkDedYCQvV84kv
Buy me a Coffee:
www.buymeacoff...
#esp #reset_esp #development_board #esp32 #esp8266 #home_assistant #integration #smart_home #home_automation #iot #reset #reset_esp32 #reset_esp8266 #security #programming #esp_web_flasher #reset_esp8266_to_default #reset_esp_to_default #flash #reset #arduino #wifi
You are the best Ali, and you deserve the best coffee cup ever 🍵, well I can see the ESP 32 wifi now, which I couldn't be4 but I can't see its Bluetooth connection, why do you think?
Thanks a million for your compliment ❤❤❤.
Try using this Webpage to Flash your device and then tell me the result:
pressif.github.io/esptool-js/
Alireza! You just saved 2 of my ESP32 Development Boards! I tried different way to bring them back to factory default, but your tutorial provided excellent guidance! Thank you!!
🤩
How to get esp web flasher
The website used in the tutorial isn't maintained anymore, but redirects to another one that works just as fine. Great tutorial, thanks!
Try using the web page:
espressif.github.io/esptool-js/
بارك الله فيك💙💙
thank you very much!
Nice info, thank you for sharing it :)
Thank you so much, I was able to finally reset my ESP32-Board.
You are welcome. 👌👌👌
👍 thank you for your time and share. 🙏
you're welcome
Thank you very much. you are a life saver.
You're welcome.🤩
you saved me :-D, thanks
muchas gracias !!!!!
Nice job
🙏🙏
Now this one worked. That Arduino absolutely didn't.
Great 👌👌
The flasher you used is no longer available. Also it is difficult to select a bin file as it is not clear which to use. Thank you.
Sir, can I do the same to bring my esp32 from micropython firmware to the default firmware?
It must work
I dont see any drivers under the Download section?
Refresh your browser.
I just checked it and there is 11 drivers.
Thank you so much. but esp32 board not responding to at commands
🙏🙏🙏
can you help me? every time I do step by step it asks, at the end only the name 'leaving...' appears but it doesn't leave that part. plus something else, I'm using an esp32 cam, which firmware would be best? It's worth remembering that I'm also using the new espressif website to import the firmware, since I said that the old one is no longer available.
I will upload a new video showing you how to reset it using new Web site in a few days. Deal??
@@kian.smarthome niiice man, thank you soo much
@@mariomassimus4136 🙏🙏
Hi tutorial reset to default mode ESP8266 D1 mini
These two videos can help you:
ua-cam.com/video/IHvmNgWXFG4/v-deo.html
and
ua-cam.com/video/gL6Y9_Oo8Ss/v-deo.html
hi , What if i am using the customized board ?I am using the esp32-wroom-1.Which Bin filke should i get?
HI, you should search for the bin file of your board.
The website is no longer updated and mine keeps saying can't sync
Try this method:
ua-cam.com/video/gL6Y9_Oo8Ss/v-deo.html
Hi, I cannot find the original file for ESP32-S3, what should be done in case there is no file for that type ? Thanks a lot
Have you checked developer's website?
Hello, sir, what if what is produced by esp web flash is
ESP Web Flasher loaded.
Connecting...
Connected successfully.
Try hard reset.
[Object.debug:187] Finished read loop
Error: Couldn't sync to ESP. Try resetting.
how do I fix this??
Have you installed its driver? Does your PC/Laptop detect the device when you connect it?
I can not find the Esp 32 s2 wrover bin file. is it still available?
Try this webpage to flash your device and tell me the result:
pressif.github.io/esptool-js/
You said "navigate to esp web flasher" but how to get to esp web flasher
This website is no longer maintained. Use esptool-js instead.
Also this video may help you:
ua-cam.com/video/gL6Y9_Oo8Ss/v-deo.html
Can you plz guide how to unbrick a D1 Mini???
Have you tried the way I say in video?
@@kian.smarthome yes... but sadly it's not working
Can this work with ESP32 cam
Yes, But be careful to download the correct original fine.
Can't I just reset it on ESP32-CAM's buttons?
Find the original bin file.
Also this web page may help you:
espressif.github.io/esptool-js/
Why In My Computer I See THe device Manager Thats DIdnt spawn the port from esp8266
Do you mean your computer doesn't recognize esp8266?
Why is my esp32 12c not working (scl,sda)
Do you use correct pins?
Can you send the device driver files? That site does not allow me to enter.
what is the model of your board?
Salam You have a very good channel and I like your content very much.
I have a problem, please help me. I bought an esp32 wroom from "Amjad Passage", which is unfortunately broken, and when I upload the Blink code, for example, it is uploaded, but the device does not show any reaction. wifi is the same and the serial monitor sends meaningless characters to every baud. I also used this method and my problem was not solved. I would appreciate an experienced person to help me. thank you☺.
Salam, Thank you for your compliment. Have you tried run it with ESPHome using ESPHome Web Tool? Does it detect your ESP?
Another question, Did you solder the terminals/pins of your ESP yourself?
@@kian.smarthome The site detect the ESP itself.
No, the device is new and I did not make any changes in the pins.
@@kian.smarthome this issue have me also please help
Do you get any solution
@@aedan2354 What are you uploading on it? try to connect and LED to one of the pins and program it as it blink to check, give me the feedback
hi sir, recently i found i cannot upload the sketch to esp-woorm-32 board due to the error of "Serial data stream stopped: Possible serial noise or corruption", so i try to follow your video above and try to install the firmware but same error is still happened. Would you advise any possible checking for my troubleshoot ? Many thanks
Hi, Have you installed driver?
Installed. Before esp32 board is working properly without any issue.
I am not sure this issue is due to incorrect voltage connection with other device connected to esp32, would you advise any tips to troubleshoot it. Thank you always
@@kitlinghou6848 1. Check your power source.
2.Uninstall and install driver again.
3.check your cable.
4.try the method in below video:
ua-cam.com/video/gL6Y9_Oo8Ss/v-deo.html
What if I don't download the original file into board development? Can I still use the board to run the system?
You have to downlead a firmware
what about linux?
Please elaborate your question.
Bro the website is no longer under maintenance !
There is another video on the channel
Greetings. What category is the ESP32 wroom in? I can not find it. Thank you.
ESP32
این در واقع فریمور اصلی رو بر میگردونه
Yes
@@kian.smarthome
اقا یه سوال کلی کنم اگه زحمت بکشی جواب بدی ممنون میشم برای کنترل حدودا 8 تا پیریز با esp32 که بشه گوگل هوم کنترل کرد کودوم روش توصیه میکنی
Bylink که تو ایران کار نمیکنه
Cardio هم همینطور
Rainmaker درست کار نمیکنه
Tasmota عالیه ولی به گوگل هوم اتصال نداره
راه حل رایگان اگه داری ممنون میشم فقط حتما بدون فیلتر باشه ممنون
pls be vegan animals also have lifes Radhe Radhe
What???
salam kian
have you had experience with 'flash read err boot:0x13 (SPI_FAST_FLASH_BOOT)' ? I tried this method and cant fix it, I tried burning the eFuse and nothing there either
Hi, No. Try another way such as using Arduino.