Great video.. I have a whirlpool top load that runs the same way and the setup is the same, direct drive shaft.. Mine was agitating but not spinning when it reached that cycle. Changed the clutch still didn't spin. Checked the coupler and it was good. With the cabinet off I checked to see if the clutch was spinning when the machine was on, it wasn't. Took off the transmission and manually turned the motor, didn't turn. Decided to go into the transmission. As soon as I set free the plate that covers the transmission, where the oil and gears are, about a cup of water rushed out. So I decided to drain all of the oil that was in the transmission, and half was oil and half water. Cleaned the transmission with kerosine and a clean paint brush, allowed it to dry, topped back up the transmission with 16oz oil and assembled the machine.. Machine is now perking, agitating, spinning and working like brand new.. Before this episode I had to change the tub, upper and lower shaft seals due to a leak. I guess what happened was water leaked into the transmission causing the gears to slip.
Dear Sir, I have samsung top load washer model WA82CSLEC/XTL 6.2 KG. I selected wash, rinse & spin. The washer does washes, drains outvwater but before spinning it wobbles & later it refills water & starts rinse & then spins.But the problem is in the1st phase it does not spin before refilling the water. While operating if the door is opened then it give buzzer sound De code displays & after closed the display dissapers. IHave checked side near to the connection of sensor & removed the connection & cleaned the connector & the sensor connector. It does not have any carbon on it. It does no display De error, 5e code. The refill water n drainage problem. I would like to ask whether it would be problem if drainge pipe is too long and the drainage pipe should be hanged upto washer level to drain.If yes upto how high should it be haged. Could you Please suggest to solve my problen. Wating for your response, Thanking you, Binod Mool Nepal
Every video I have watched skips the part that tells you how to get to the motor how to take the panel off and where to find all that inside. I think a lot of repair people think everybody just automatically knows but we don't
Nobody answers this question. What if my whirlpool top loader sometimes spins and sometimes doesn't? Agitator works fine..Clutch is new, and coupler is fine. Lid switch is inactive and is irrelevant. Timer seems to work ok, except on knits and gentle cycle it doesn't work..Other cycles work fine. So is it my timer or transmission? Drains fine and agitates well. New whirlpool clutch installed 5 months ago. Maybe contacts worn in timer cause when timer is cold it sometimes spins. I notice back of timer gets warm, is that normal?
You can check the timer to see if there is any damage to the timer. If there is you will need to replace it. If you can provide your model number we can look up more troubleshooting for you. You can also call us at 1-877-477-7278 if you have more questions.
@@appliancepartsprosIt was the transmission. But now the new transmission is over stressing my 35 year old motor, and motor was smoking last night, but still works. Unless the smoke is from the new transmission breaking in? Putting a nee timer on today anyways. Can a new transmission stress a 35 year old motor? Motor still wotks though.
@@appliancepartsprosAfter installing new transmission i notice power cord gets warm. Timer gets warm on backside too. Smoke was probably from old motor going out, but it still works. Haven't seen smoke again since then.
Could my issue be the clutch? My washer drains but doesn't spin (it just makes a loud whirring/grinding type noise) -- UNTIL -- you open the washer, which pauses the wash cycle, and close it. THEN it starts to spin, drain, and that noise is gone.
Need advice .. Washing machine fills up with water and drains water .. When it fills to its point and I close the lid it starts making a popping sound on the bottom it doesnt agitate the water Is it the clutch? GE washing machine model WH38X10019
OK, so my washer works fine as far as the wash cycle, but it's starting to not spin. I found out that I can twist the agitator (DO NOT TRY THIS!!!, I am not responsible for any injury or damage incurred) a little and it will slowly start spinning, then gets up to normal speed. Sometimes it will work fine for a few times, then I have to do the same thing again. What would be the cause of this??
When it starts to drain but not spin I open the lid, shut it, then I hear a loud clicking/impact noise. At that point it starts spinning Can this tell you what the problem is specifically?
Thank you. It sounds like you have a bad lid switch, part number WP8318084. You can place that order through the website, or you can call us at 1-877-477-7278 to place the order over the phone.
My lid lock light flashed when it started the spin cycle. Bought a new lid lock and it still didn't work right. Found out my lid was warped downward. I pushed on the center and it popped back into place like a Snapple lid. Now my lid lock works properly
Great video.. I have a whirlpool top load that runs the same way and the setup is the same, direct drive shaft.. Mine was agitating but not spinning when it reached that cycle. Changed the clutch still didn't spin. Checked the coupler and it was good. With the cabinet off I checked to see if the clutch was spinning when the machine was on, it wasn't. Took off the transmission and manually turned the motor, didn't turn. Decided to go into the transmission. As soon as I set free the plate that covers the transmission, where the oil and gears are, about a cup of water rushed out. So I decided to drain all of the oil that was in the transmission, and half was oil and half water. Cleaned the transmission with kerosine and a clean paint brush, allowed it to dry, topped back up the transmission with 16oz oil and assembled the machine.. Machine is now perking, agitating, spinning and working like brand new.. Before this episode I had to change the tub, upper and lower shaft seals due to a leak. I guess what happened was water leaked into the transmission causing the gears to slip.
Great video and easy to understand. Thank you!
Thank you for everything.. my friend
Najah.... from iraq
Is the transmission not a usual cause for my Roper to agitate (& drain) but not spin?
Hi, Just need to know if a clutch will cause the pull to freeze up on spin?
Good lnformation
What a great channel
Dear Sir, I have samsung top load washer model WA82CSLEC/XTL 6.2 KG. I selected wash, rinse & spin. The washer does washes, drains outvwater but before spinning it wobbles & later it refills water & starts rinse & then spins.But the problem is in the1st phase it does not spin before refilling the water. While operating if the door is opened then it give buzzer sound De code displays & after closed the display dissapers. IHave checked side near to the connection of sensor & removed the connection & cleaned the connector & the sensor connector. It does not have any carbon on it. It does no display De error, 5e code. The refill water n drainage problem. I would like to ask whether it would be problem if drainge pipe is too long and the drainage pipe should be hanged upto washer level to drain.If yes upto how high should it be haged. Could
you Please suggest to solve my problen. Wating for your response,
Thanking you,
Binod Mool
Nepal
Every video I have watched skips the part that tells you how to get to the motor how to take the panel off and where to find all that inside. I think a lot of repair people think everybody just automatically knows but we don't
If you can't figure that part out then you probably shouldn't be fixing anything inside
Just what I needed!! Thank you!!
Nobody answers this question. What if my whirlpool top loader sometimes spins and sometimes doesn't? Agitator works fine..Clutch is new, and coupler is fine. Lid switch is inactive and is irrelevant.
Timer seems to work ok, except on knits and gentle cycle it doesn't work..Other cycles work fine.
So is it my timer or transmission?
Drains fine and agitates well. New whirlpool clutch installed 5 months ago.
Maybe contacts worn in timer cause when timer is cold it sometimes spins.
I notice back of timer gets warm, is that normal?
You can check the timer to see if there is any damage to the timer. If there is you will need to replace it. If you can provide your model number we can look up more troubleshooting for you. You can also call us at 1-877-477-7278 if you have more questions.
@@appliancepartsprosIt was the transmission. But now the new transmission is over stressing my 35 year old motor, and motor was smoking last night, but still works. Unless the smoke is from the new transmission breaking in? Putting a nee timer on today anyways.
Can a new transmission stress a 35 year old motor? Motor still wotks though.
Whirlpool # LA6058XSW0
It is not normal for the unit to smoke. If it's smoking you need to determine which part it's coming from and replace it.
@@appliancepartsprosAfter installing new transmission i notice power cord gets warm. Timer gets warm on backside too. Smoke was probably from old motor going out, but it still works. Haven't seen smoke again since then.
Heymy washer is Kenmore and it got button on the side of the washer and door close it hit the button and it start to spinning
Does it make high pitched noise when coupler replaced
Could my issue be the clutch? My washer drains but doesn't spin (it just makes a loud whirring/grinding type noise) -- UNTIL -- you open the washer, which pauses the wash cycle, and close it. THEN it starts to spin, drain, and that noise is gone.
hi bro,please make the video,how to remove the drum of electrolux elita plus et62ep top loading washing machine
Need advice .. Washing machine fills up with water and drains water .. When it fills to its point and I close the lid it starts making a popping sound on the bottom it doesnt agitate the water
Is it the clutch?
GE washing machine model WH38X10019
Also noticed that when trying to spin belt it would get stuck
Coupler....😮💨🙄
What if the washer drains and does spin, but only with a light load? Won't spin with a regular load.
I have same problem , i believe is the lid switch
Same here... did you find a fix??
@@googlelover2269 yes it was the door switch for me but i also changed the clutch.
Wish my washing machine has a part number tag..... can't find my machine anywhere
Are you unable to find your model number? There should be a sticker around the door area or on the back panel.
Matt rocks!
what about sensor ?
OK, so my washer works fine as far as the wash cycle, but it's starting to not spin. I found out that I can twist the agitator (DO NOT TRY THIS!!!, I am not responsible for any injury or damage incurred) a little and it will slowly start spinning, then gets up to normal speed. Sometimes it will work fine for a few times, then I have to do the same thing again. What would be the cause of this??
My washing machines agiatator will not turn on wash, but it will turn on spin. What is the problem
When it starts to drain but not spin I open the lid, shut it, then I hear a loud clicking/impact noise. At that point it starts spinning
Can this tell you what the problem is specifically?
What is your model number?
@appliancepartspros Estate by Whirlpool ETW4400WQ1
Thank you. It sounds like you have a bad lid switch, part number WP8318084. You can place that order through the website, or you can call us at 1-877-477-7278 to place the order over the phone.
What wood calls washer not to spin or agitate
My lid lock light flashed when it started the spin cycle. Bought a new lid lock and it still didn't work right. Found out my lid was warped downward. I pushed on the center and it popped back into place like a Snapple lid. Now my lid lock works properly
Turn the water back on and take it for a spin.... LOL Okay, now that was actually funny considering what the video was about!
I cannot access the electrical plug, so I’m calling a professional
Sucked!!!