Laminated Gift Card Holders with Popper/Snap Fastenings
Вставка
- Опубліковано 2 лип 2019
- Papercrafting inspiration from Linda Parker, UK Independent Stampin' Up! Demonstrator
www.papercraftwithcrafty.co.u...
Of course, you could use the Envelope Punch Board to punch out a Gift Card sized envelope and then laminate it, but I wanted to demonstrate this alternative method for those that don't own one.
www.ebay.co.uk/itm/KAM-Snaps-... - Навчання та стиль
Lolly is the first crafter I followed. I really like her.
Thank you so much for the shout out! A friend shared your video with me! They are sooo cute!
You are so welcome - I love your channel. And thank you Lolly x
Thank you Linda to the lovely cardholders in two easy ways. I really enjoyed them as I always do.
Hi Linda, cute project. You could put two envelopes back to back and run them through your laminator, you get the same effect when you cut them apart. That way you'd get four envelopes for each laminator sheet.
Someone else suggested that. I am going to give it a try. Thanks Jill 😘
Lovely project, Linda as usual. Really cute card holder. Thanks for sharing.
Thank you Sally 😘
Simply lovely, great tutorial, thanks for sharing.
Thank you Irene 😘
Stunning😍Great idea, love it❣️Thanks Linda. Lyne xxx😘
Thanks Lyne 😘
This is brilliant Linda! Beautiful job! Thanks for this wonderful tutorial!! God bless!!!!!
Thanks so much 😘
You are a genius! Love this!
Love your project! I also like watching Lolly Palooza and have been inspired by her, too. Thanks for sharing.
Wow i love that idea, Thank you for a brilliant technique with lamination sheets. See you on the next one
Thanks Maria 😘
I love these!! I just found you on UA-cam!!! Thank You!
LOVE this! I follow Lolly as well, she has some really neat ideas. I so love all your projects, Linda! So much so that yesterday, I joined the Stampin' Up family here in Canada! I am now a Stampin' Up Demonstrator! :)
Thanks so much Carol - enjoy your Stampin' Up! journey 😘
Great idea , thanks Linda x
That’s a lovely project. Christmas gift cards came straight to mind. I agree about lolly I love that she shows all the thought process. It’s really helpful. It also gives me another way to use my laminated. Thank you Linda 👩❤️👩
I think these gift card holders look really professional with the poppers. Great tip about putting the typing paper inside the
laminating sheets. I love them, they are so lovely. Thank you for the idea and all your inspiration.
Thanks for the lovely feedback Jeanne 😘
Hello Linda! How creative and cute are these little lamented gift card holder. I really appreciate the tutorial and hopefully I can try my hand at these little cuties. Thank you for sharing. 🤗🤗🤗🤗
Thanks so much Norma Lisa - they were great fun to make 🤗
I am subscribed to Lolly also. I love the gift card holder. Will be making some. Thanks for the inspiration.
Thankyou Linda !
Love these Linda ! Very interesting about the laminating there, am going to have to try it. Also love the fasteners, seen them used before, but never got on to it. Hmm ! Certainly plenty to think on, thanks for sharing.
Thanks Jean - go on ...... give it a go 😘
Envelopes amorosos! Obrigada mrs. Linda!
Thanks Maria 😘
Its gorgeous x
Thanks Anne 😘
Love this idea thanks for sharing.
Thanks Jean 😘
Here in the US we call them cam snaps. I use them in sewing projects all the time. Great project! Have a beautiful day.
Thanks - yes, I do share that in an on screen annotation. They are great. Thanks for your kind comment Michelle.
Great idea😊
Thank you Carlene 😘
So cute love this tfs 👍x
Love it x
Thanks Sue 😘
Love this
Thanks Veneta 😘
What a smart way of making envelopes! Nice! I can use that on work where i don't have an envelope punch board but I was thinking couldn't you put 4 envelopes back to back into the laminating sheet?
Awesome project ... haven’t seen the cam snaps before ... will definitely have to check that out. Thank you! Was thinking that if you folded your envelope closed & marked where your bottom one would go you could then open it up to put the cam snap in before you taped the envelope shut ... it might be easier. Also ... if you put your tape on the side flaps instead of the bottom flap you won’t ever accidentally go too far & tape your envelope shut. Thanks again for a great video!
I love Lolly too
I love this idea Linda, and am definitely going to try it. Do you think it would work to laminate two of the DSP envelopes back to back instead of using white copy paper? Would they come apart without tearing if you were careful? I was just thinking that then you could get four gift card holders out of one set of laminating sheets. Might have to give it a try!
I shall be giving that a try Gillian - thank you for the feedback 😘
Awe... just read the post below mine asking sane question. 😂
Envelope punch board as size for gift card. Thank ill try this with envelope punch board.
Linda, these are so cute & I love the snaps. I was wondering if you could make 4 at a time? Where you put white paper, why couldn’t you use another print to make more instead of wasting the laminating sheet? I have not laminated before, but it dawned on me to ask you. Thank you so much.
Hi Linda, fab idea and thanks for sharing. Can I ask what size popper you used please ? Thank you xx
I am honestly not sure but I posted a link above - I think they call it T5. I ordered a multipack from Ebay
So cute thank you 😘 Where did you get the snap fasteners from please? Do you have a link? x
Thanks Barb - I can't find the exact link I used, but it was these from Ebay www.ebay.co.uk/itm/KAM-Snaps-360pcs-T5-Plastic-Buttons-Stubs-Poppers-Fastener-Snap-Pliers/122843799524?epid=18010679637&hash=item1c9a0f9fe4:g:UwEAAOSwdA9aq38L
What am I doing wrong. I am following the instructions from you and the Snap pliers and the snaps won’t work. It seems that the prong in the centers are not letting the snap snap close. What am I doing wrong?
Linda, please help. I have try 10 times to make these. Everything is great until I try to snap it shut it won’t snap shut. I’m doing everything exactly like you show in the video. Please if you have any ideas why it isn’t snapping shut.
Very nice I love this idea!
Will I be seeing one from you ? LOL 😘
Linda Parker you know I will!
Love it Linda! What brand of tape do you use?
Thanks Rebeca - I used Stix2 for my 3D projects
This is a beautiful project. An envelope punch board doesn't work?
It would definitely work but not everybody has one so I wanted to demonstrate an alternative method. 😍
Pretty though these are, laminated plastic is non-recyclable and therefore add to the plastic problems that are causing pollution. I won’t be making these but will try to see if they will work with acetate. Acetate is recyclable.
Could you just run the 5 by 5 squares through laminator first then do cuts
Love the project Linda! Thanks for sharing! p.s. where can we get those snap things please?
Thanks Robin - I posted a link above to Ebay where I got mine 😘
@@LindaParkerTutorials thank you! :)
You could have made four in a single pass! You wasted the laminating sheet on the other side.