Renault megane radio upgrade

Поділитися
Вставка
  • Опубліковано 19 кві 2023
  • this video shows how to upgrade Renault megane 2009 - 2016 stereo upgrade to Android auto and Apple carplay aslo with built-in satellite navigation. and can download your favourite app through play store.
  • Авто та транспорт

КОМЕНТАРІ • 12

  • @AlfonsoGonnella
    @AlfonsoGonnella 2 місяці тому +1

    Great solution for the pore factory system, will it work in a Megane RS 2016 with the RS Montinor?

  • @lawrence.porter
    @lawrence.porter 2 місяці тому

    Hi, there's the red wire you show and say doesn't have to be connected but there are also another 2 red wires that connect together. When I connect them together I get no power and when I try with the other one I get no power. I had to cut the plug off and wire it to the battery but the canbus doesn't control the steering controls and the passenger airbag light says disconnected. The stereo works fine though.

  • @philipmunro261
    @philipmunro261 6 місяців тому

    Hi it mentions in video need to connect two wires in loom together but then it doesn't show which ones can you advise please ?
    and also do you have to connect anything back into the old stereo or everything works from the android only ? Many thanks

    • @maani3511
      @maani3511  6 місяців тому

      Hi don't have to connect anything in old stereo, works straight from Android, probably you talking about fan connector which got two wires in it

  • @ronsone8373
    @ronsone8373 6 місяців тому

    I also would like to know if the cd player still works

    • @maani3511
      @maani3511  4 місяці тому

      No cd player will works after upgrade

  • @raffaelepilato2435
    @raffaelepilato2435 5 місяців тому

    Which is the link to buy it?

  • @antonyaourtis5702
    @antonyaourtis5702 2 місяці тому

    Where’s the link to buy it?

  • @shaneboybrown1393
    @shaneboybrown1393 4 місяці тому

    Hello 👋👋👋,I have a question, computer monitor wire what should you do there ,I can't find any plug to plug in it , anyone can help me with this I would greatly appreciate.are a link of a video also is good?

    • @danielneamtu
      @danielneamtu 4 місяці тому

      Hello,
      If you have already installed the TomTom navigation system you should remove left air vents and push out the cluster. Once you remove the cluster you will see a cable with a gray connector. You need this connector to connect it to your new multimedia system.
      I'm in the same situation and I found the anwser in another video. :))

    • @maani3511
      @maani3511  4 місяці тому +1

      Computer monitor wire?