Upgrading from the Aqua Pro Vac to the Mytee Lite 8070 Heated Extractor- FIRST TIME USE!👍or👎?
Вставка
- Опубліковано 17 жов 2024
- #Aquaprovac #Myteelite8070 #Progradeextractor #Bestextractorfordetailing #A2dlancaster #Deepcleaninteriors #Femaledetailers #XtremeSolutions
After over 2 years and hundreds of details, its finally time to upgrade my Aqua Pro Vac to the heated Mytee Lite 8070 Extractor. Y'all have seen me use my Aqua Pro Vac before 👇
(like here) • Most affordable extrac...
(and here) • How I Deep Clean Nasty...
so lets focus on the Mytee 8070 and how it performs and some differences I recognize while using it for the very first time.
Trying to decide which is best for you? Well here's links to purchase each to try them out for yourself!
Use coupon code CHELSEA10 to save 10% off at Car Supplies Warehouse
Mytee Lite 8070 Heated Extractor: bit.ly/3N30aCO
Aqua Pro Vac: shareasale.com...
Comment below which you would choose and why?
This machine moved me into the real production model of the business. Can't say enough about it, except buy it as soon as you can.
Little trick for us detailers out there I started doing this. Take a 1-2 clean rags or semi dirty ones and put them over the center when extracting much easier to clean less mess
You will love that machine. I recommend you use distilled water only in it. This will keep you from having to descale the unit due to mineral build up also it will make your pump and heater last a lng time.
The heater actually gets up to temp in 3 minutes - at first, please wear gloves if you're not use to the heat - also, you don't need as many passes as the toy extractors - as she said there is a LEARNING CURVE - enjoy and have fun :) PS. 1 wet pass and then 1 dry pass (50/50) helps the heater keep up. Also PS#2 It's way better if you fill it with HOT water around 140-150 degrees but no hotter than 150
Just got my 8070. Water sprays hot for 5 seconds, then turns cold. This can’t be normal????
@@marksafady1059 Mark you have to use hot water in your Mytee. Fill it with hot water, spray for 5 seconds then turn the heater on then wait 3 minutes. Now you're good. 1 wet pass is NOT 5 seconds. Do 1 wet then 1 dry.
@@KennyCosway Chelsea said in the video that her water stayed hot the whole time. Did she initially fill with hot water? And she wasn’t shy with using the pump.
@@marksafady1059 SHE did not hold the trigger open the entire time cleaning the car, When you let go of the valve and spray no water that is when the water heats up. I have been using and selling extractors for 30 years and I am a Mytee dealer. Your dealer should have taught you how to use the machine. We never let a customer leave without full training.
@@KennyCosway I’m not saying she held the trigger the entire time, but she pulled it somewhat frequently. I’ll try adding hot water. I think hot water may be a bit overrated.🤷🏻♂️Chemical and process seems like it’d be more important.
Wow! I like this unit, not only is it going to speed things up, but with the introduction of hot water you're gonna be able to do a more thorough clean job. Great vid chealsea 👍
Wow another awesome video I miss this type of videos , I call them freee style. Very informative and an honest review thank you thank you. Looking forward to more great content. :).
Ohhhhhh snap! Congrats on the upgrade girl! You definitely earned it!
Thank you for the excellent video. I’m in the market to move up from my little Bissell and this video gave me a lot of helpful information.
I’ve had the spyder for a few years now. It’s been amazin, I usually spray the rinse from the bottle after everything let it sit for a minute and just dry pass. Always get dry results after
Hello Chelsea from Down Under ;) Great video thanks and more like it please 👍
Definitely worth the money to get the upholstery tool, no over spray, no over saturation and faster drying time
Chelsea, congrats for your new Maytee. I have the same machine. I use 2 Oz of Grimebreaker in 1 water galón as pre-spray, let work for 10 minutes give a little agitation and after that, rinse wirh 2 Oz per galón of Propel.(pH 3 ácid pH) Wich neutralize Grimebreaker ( alkaline pH 9). This are Soklene Products wich are Made un California US. Also, let me tell You, i use to put some waterproff lubricant on the triger. Some w40 on bronze conections. Hope that help You to maintein in good condition your machine.
Awesome new toy. Congrats on the upgrade
Congrats Chelsea on the new equipment you should get great Results with that one!! I got upgrade extractor so this video came at a great time! Happy detailing ! Stay blessed
As someone who grew up in the carpet mills of northwest Ga hot water extraction is far superior to cold water extraction. You just stepped up your detailing business.
I had a karcher. Nothing but problems.
I now use and recommend Bissell spot clean for home and work. At 1/3 the price. I have used the work one for 2yrs at 3 full cars a week. Your machine looks the goods
LOL the Bissell is not a professional tool. The Mytee 8070 is the ENTRY level pro extractor. ENTRY LEVEL
Great video! Good results on the Subaru. I considered the Mytee, but for me the cost was a little too high. I upgraded my extractor earlier this year and got the Sandia.
Excellent video!! Thank you so much. Really helped me decide on buying this unit. Do you have a link to the cleaner you are using
Excellent points, I just upgraded to the Sandia heated 3 gallon. Your views about the wand, overspray and arm fatigue are on point but the results trump that I find. As you said, just things to be aware of. I had a hoover portable before, served me well until. Also more Subarus 😁, my personal vehicle is the 17 Forester Xt.
How is the suction on the Sandia heated 3 gallon?
@@marksafady1059 I don't have much to compare to, I upgraded from a hoover spot cleaner so for sure better than that. I'm happy so far. Later on I'll change to a clear plastic head to see the extraction. Makes life a tad easier than the SS head.
I do mobile detailing had my whole enclosed trailer stolen. I got my trailer back but my mytee 8070 is gone. I have another on the way love these little machines! Guard your equipment.
If you don’t mind me asking i have a generator the wattage is 4357 and running 3500 around there could this machine run with my generator? It’s a predator generator
Excellent review, would like to see more of the Mytee on extremely dirty/stained/pet hair vehicle & your thoughts on the "heated water" results vs the "cold water" Aqua Pro. I have the Aqua Pro, but the cash $$$ jump for the Mytee is 2.5x the cost. . . ...maybe its worth every penny? Extra capacity tank is a big+. Thanks! 😁
Thank you for your review I will be buying that 8070 right now I am currently using the Bissell spot-clean and it's taking me a lot longer to finish my detail when I have to keep refilling the water every floor and seat depending on how dirty they are thank you again great video
Nice to see you investing in the business -- congrats -- you have a pro level machine now
Great video and big congrats on the new extractor.
Mytee looks good but it’s not portable especially if you don’t have a dedicated van or truck yet. :( Nonetheless, excellent review and comparison! :)
The internal spray wands are amazing to prevent overspray. Obviously the sapphire setup is perfect but for $120 on Amazon can get a good one
Great review on the 8070. I love mine, hope you enjoy it for many years!
Thank you for the great info.
O yes mytee
Hey Chelsea how did you get the solution hose to get inside the vacuum line?
Great review 👍🏽
I just got mine for my detailing business and was wondering if you have had problems with dirt and debris clogging the machine considering the clean water tank is exposed, i might make a diy lid for it!
No issues with that. Only issue was the sprayer wasnt working and apparently machine had built up too much pressure and needed to depressurize hose, reattach and it was good to go.
Heyo! Any updates on this extractor? I am going to be buying this or his little brother today and other than crevice cleaning it looks great.
Works great is just a learning curve as I'm used to the more slender and lighter head of the aqua pro vac but for deep cleaning its amazing and nice to not have to refill during use. Saves time
Maybe I’m picky but i can’t stand the aquapro. I’ve replaced 2 lids, 2 handles, and the wheels literally fell off. Debating getting the mytee or downgrading to a bissell
Only thing Ive had to replace on mine was the hose once.
really great loved it so much
Great information! I've been wanting this exact extractor. Do you know if the electrical outlet your using is a 15 or 20 amp breaker? I wish the spray head had some side walls to keep the overspray from going out the sides.
I think its a 20 amp breaker but I'll have to ask my husband. 🤣 and yes I wish it had a sidewall too. Miss that from my aqua pro vac. Might look into the steel sprayer to see if it fixes that and is less bulky
@@attention2detailswchelsea I think they have a "spyder" attachment as well that puts out constant water, but less of it, with suction on both sides. It's pretty expensive as well I do believe.
Check out Detail Groove. He put a different head on it. Since I saw him use the head I have seen it many more times in others extractors.
It looks good
Is that the upgraded nosle? The one I got is just a normal metal one.
It came standard with this unit. I think stainless steel is more $$
How's that overspray? Any remedy yet?
Quick question, does your extractor drips from the bottom i have the sams one but it drips a lil bit from the bottom
Yes it does drip a little
@attention2detailswchelsea ahh thank you.. I got worry haha
Is it problem? I seen alot of bad reviews on this machine on Amazon but only good youtube reviews. So I'm torn if it's worth the money or not😢
If you encounter nasty interiors it can be a worthwhile investment but to be honest i use my aqua pro vac more frequently as it’s not as fatiguing on my arm and can get into tighter spaces better
your first actually professional extractor
Great vid thank you
How’s this machine holding up?
Works great!
@@attention2detailswchelsea thanks I’m thinking of picking one up this week
Does it jump your breaker, it seems it is rated at 19amp..
No I use a heavier amp extension cord but it runs off of a standard outlet but I can’t do anything else on that outlet or it will trip it
Hi how's the suction power on this? Does it have more suction than the aqua pro vac?
Yes
can i use this with a predator 2000 watt generator.?
Cheers Chelsea!! I'm strongly considering getting this Mytee... I just don't understand why they wouldn't supply the wide mouth extender wand for cleaning carpets, rugs etc.. Do you know if it is possible to buy a cheap one and fit it? It's kind of annoying because a lot of the cheaper extractors out there come with both..
You'd have to check with Mytee what their options are
www.mytee.com/products/8300-ez-12-dual-jet-wand-carpet/
What made you purchase this over some of the other mytee units?
Reviews. This one was highly recommended with other detailers
The over spray is just a big no no for me.
Other than that it looks solid.
A smaller head attachment would have been a nice accessory.
I would love to know how much you make of your detailing business in profit if you don't want to answer that's all good after all its kinda private question great videos
Objective should be over $1k/week. . . ...just finished a large boat going to broker for immediate Fall boat-show sale, $2.5k for 4-days work.
3rd
The mytee you showed via Instagram.
How satisfied was the lady that was your customer of the vehicle? Hope she witnessed the awesomeness you deliver.🙏👍
She was happy with the outcome
1st
The only problem I see what that machine that it's prays too much water on the sides of the wand you have to buy the other new wand that don't spray to my water
Cool
Familiarize yourself with warranty process.. These things break all the time!
The 8070 sucks.........
I appreciate your honesty, I’m ordering my Mytee 🫡💯🔥
What drill do you use for seats I have a cheap one that is not easy to control
Dewalt cordless drill