It's actually better for the batteries if yo ugeta battery charger and charge the batteries outside of the device but the charger port is good for on the go
The "manual" that came with mine doesn't even mention the front display or tell you what the symbology means. Some of it is obvious, like how much power you're running and the impedence. Trying to figure out what the "C" readout means....
hello-- thanks for the review on this product-- I bought one-- but i still have questions about it - what do i use to get the max amount of smoke-- with what settings..
Thank you for your comment, well it depends on what coil you're using. Experts recommend using .2Ω with 60 Watt of power output. We also recommend using it with our very own Virginia Blend. This is what we and experts believe but why don't you run your own experiments and share what you find with us.
This is a great video, I've had my l200 for a few months now, and for some reason it constantly tells me the ohm value has changed, and I have to tell it if it's a new coil or not, sometimes as much as only using it one time in between. Is there a way to bypass this feature, or is there something wrong with my mod? Or am I just doing something wrong?
@@SulcataCorner no. Sometimes I will go into the settings, and manually set the ohms around the number it should be, and it will stop asking for a little while, but then it starts again. I think it's just a programming error. If you hit the fire button a second time when it asks you, most of the time it will just turn on, and you don't have to worry about it. Best of luck
I own 5 geek vapes. This particular unit is NOT shock resistant! I was told otherwise, and I'm overly disappointed about that as it's not as solid as any of my other mods. I dropped it about 1 foot from the ground and every since it's had a bunch of issues 😢 it's paint is almost completely worn off as well& at 1 yearsof use, my 10 year old original mod doesn'teven have a scratchandneither does the other 3 mods.. but it has all sorts of issues. So im using a larger tank, it pulls the top of the vape away from the batteries guess, but theres no contact with them. I HAVE tried numerous times to tighten the screws down a bit, but again, it just pulls away& happens over and over. Its no big deal, a hair tie pulls it back into place. So the tanks are an issue for me as i dont like to have to refill them all day long. So the smaller tank like the unit here, this one If you don't prime it just right then you will burn the coil really quick or end up with a mouthful of juice. Besides, it is smaller and holds less juice & it doesn't hold much juice as the Zeus tank does. The coils I've found recently are completely garbage, went through a whole box of 5 and they all burned and tasted like burning paper bad. 😢😢 I stopped and bought a single coil at a different shop and their coiks were just like the other 5 i just wasyed money on!! Ive finally found some decent coils, in a different staye thank god.... So i bought a couple boxes! Either way the have found that the .2 is better than the.25.... It just doesn't work well at a higher heat setting for me, just to easy to burn... Maybe its just in my settings, lol. But I found the Zuess max tank is much better and I've never had any issues with it except the tanks are very difficult to find nowadays. I certainly could buy a different brand of tank, but I'd prefer not to... I was given an original geekvape Aegus approximately 10 years ago and it still works great, except for the locking mechanism on the bottom doesn't latch at all..... not anymore and I was thinking about using parts off of a different mod 1 to repair another mod.... Not sure if it's doable or not... But I'd be really happy if anyone knows where I can buy a zues max tank, top airflow and if anyone is knowledgeable about fixing or swapping parts so I have a totally functional mod that's functional. I CARRY 2 MODS AND TANKS with me daily for multiple reasons, but mainly because I drive a lot, and if I drop one or the battery dies, I just can use the other one.... But please let me know if you have any advice regarding my above needs listed complaints... lol take care.... (im just someone's mom in Colorado) Ms. T
If I were you I'd reach out to geek vape about the issues you are having. It could be that some of the things you are using aren't compatible with the mod you have or that you received a faulty mod. They might replace or repair it for you. I haven't had mine long but I am clumsy and knock it on shit and drop it a lot and I've had no issues there. I just found this video trying to figure out the controls because the manual isn't very intuitive. This guy didn't really explain all the settings and what not but did help me figure out how to set it I just need a video on how to set it for the results I want I guess. Good luck I hope you figure something out and don't just have to ditch your mod since they are so pricy.
Doesn't anyone take their batteries out to charge them in a stand-alone charger? It's a better charge, and I know with my l300 it's required, so the display as well as all the circuits don't get ruined... hmmmm BTW THIS MOD WILL CHIP THE PAINT OFF VERY EASILY Just warning you if you buy one. None of my other 5 geekvapes have worn like this one it's only 1 year old, and my oldest is almost 11 years old... Try the newest or an older geekvqpe they jyst seem to be better... BTW if you live your clouds, stay away from the mini geeks, they just do not work as well.....
This is the best video I've seen describing how to use a sub device. Thank you so much!
Glad it was helpful!
It's actually better for the batteries if yo ugeta battery charger and charge the batteries outside of the device but the charger port is good for on the go
what are the numbers and modes below the wattage i messed around with them now i dont know what i did
I was looking all over for a spot to charge lol
Same 😅
Best vid ever ❤
The "manual" that came with mine doesn't even mention the front display or tell you what the symbology means. Some of it is obvious, like how much power you're running and the impedence. Trying to figure out what the "C" readout means....
Count - it's the number of puffs you've taken, up to 9999. If you reset it when you change your coils you can get an idea on their lifespan
Just got it and omg its amazing
Iam using a valarian tank
We're glad that you like it.
How doing fix my switch
I just bought this today and the salt nic that the lady at the counter recommended. Why shouldn’t I use the salt nic?
Dnt listen to this guy , use saltnic . This guy is in the wrong . Using a 70/30 ration on a non sub ohm lmao
No he's not wrong. If you vape salt nicotine juice at high wattage you will get nicotine poisoning. Look it up if you don't believe me.
@happyvibes1236 but almost every salt flavours are above 6mg nic... which is too heavy for dtl pods
Hello, why i shouldnt use my 50/50 6mg freebase juice on that coil?
Because it will spit and you'll potentially burn yourself.
very good explanation, but mine it says 200w on the box, but if it is 80w inside, how i do 200w?
You don't want to do 200w. Think of "200w" as having more than enough "headroom" so that your batteries won't need to be charged so often.
Can I use zeus coil in this tank
hello-- thanks for the review on this product-- I bought one-- but i still have questions about it - what do i use to get the max amount of smoke-- with what settings..
Thank you for your comment, well it depends on what coil you're using. Experts recommend using .2Ω with 60 Watt of power output. We also recommend using it with our very own Virginia Blend.
This is what we and experts believe but why don't you run your own experiments and share what you find with us.
I didn't get the tank
im useing valkery 30 mm with this . valkery x l200 = beast setup
love from bangladesh 🇧🇩
The users manual is useless, it doesn't tell you how to use anything. I'm on here to find out which settings do what
Why should you not use the 50/50?
This is a great video, I've had my l200 for a few months now, and for some reason it constantly tells me the ohm value has changed, and I have to tell it if it's a new coil or not, sometimes as much as only using it one time in between. Is there a way to bypass this feature, or is there something wrong with my mod? Or am I just doing something wrong?
You ever find an answer to this?
@@SulcataCorner no. Sometimes I will go into the settings, and manually set the ohms around the number it should be, and it will stop asking for a little while, but then it starts again. I think it's just a programming error. If you hit the fire button a second time when it asks you, most of the time it will just turn on, and you don't have to worry about it. Best of luck
I bought one today all was ok then suddenly I'm getting the liquid in my mouth when I vape it and it's disgusting help me please
I bought one too today, did you ever figured out how to fix it
I own 5 geek vapes. This particular unit is NOT shock resistant! I was told otherwise, and I'm overly disappointed about that as it's not as solid as any of my other mods. I dropped it about 1 foot from the ground and every since it's had a bunch of issues 😢 it's paint is almost completely worn off as well& at 1 yearsof use, my 10 year old original mod doesn'teven have a scratchandneither does the other 3 mods.. but it has all sorts of issues. So im using a larger tank, it pulls the top of the vape away from the batteries guess, but theres no contact with them. I HAVE tried numerous times to tighten the screws down a bit, but again, it just pulls away& happens over and over. Its no big deal, a hair tie pulls it back into place. So the tanks are an issue for me as i dont like to have to refill them all day long. So the smaller tank like the unit here, this one If you don't prime it just right then you will burn the coil really quick or end up with a mouthful of juice. Besides, it is smaller and holds less juice & it doesn't hold much juice as the Zeus tank does. The coils I've found recently are completely garbage, went through a whole box of 5 and they all burned and tasted like burning paper bad. 😢😢 I stopped and bought a single coil at a different shop and their coiks were just like the other 5 i just wasyed money on!! Ive finally found some decent coils, in a different staye thank god.... So i bought a couple boxes! Either way the have found that the .2 is better than the.25.... It just doesn't work well at a higher heat setting for me, just to easy to burn... Maybe its just in my settings, lol. But I found the Zuess max tank is much better and I've never had any issues with it except the tanks are very difficult to find nowadays. I certainly could buy a different brand of tank, but I'd prefer not to... I was given an original geekvape Aegus approximately 10 years ago and it still works great, except for the locking mechanism on the bottom doesn't latch at all..... not anymore and I was thinking about using parts off of a different mod 1 to repair another mod.... Not sure if it's doable or not... But I'd be really happy if anyone knows where I can buy a zues max tank, top airflow and if anyone is knowledgeable about fixing or swapping parts so I have a totally functional mod that's functional. I CARRY 2 MODS AND TANKS with me daily for multiple reasons, but mainly because I drive a lot, and if I drop one or the battery dies, I just can use the other one.... But please let me know if you have any advice regarding my above needs listed complaints... lol take care.... (im just someone's mom in Colorado) Ms. T
If I were you I'd reach out to geek vape about the issues you are having. It could be that some of the things you are using aren't compatible with the mod you have or that you received a faulty mod. They might replace or repair it for you. I haven't had mine long but I am clumsy and knock it on shit and drop it a lot and I've had no issues there. I just found this video trying to figure out the controls because the manual isn't very intuitive. This guy didn't really explain all the settings and what not but did help me figure out how to set it I just need a video on how to set it for the results I want I guess. Good luck I hope you figure something out and don't just have to ditch your mod since they are so pricy.
Use z series MD coils. I used MD coil and it's unbelievably give me 9999 + 3000 puffs and still not burnt but slightly
Do you like 0.25 or 0.2 what is the best
.25 dual
How do u change the color on the display?
Hold power and both left right button at same time
tobacco flavour.
name of batterys?
Those are samsung
Doesn't anyone take their batteries out to charge them in a stand-alone charger? It's a better charge, and I know with my l300 it's required, so the display as well as all the circuits don't get ruined... hmmmm BTW THIS MOD WILL CHIP THE PAINT OFF VERY EASILY Just warning you if you buy one. None of my other 5 geekvapes have worn like this one it's only 1 year old, and my oldest is almost 11 years old... Try the newest or an older geekvqpe they jyst seem to be better... BTW if you live your clouds, stay away from the mini geeks, they just do not work as well.....
Nice video.....more of an instruction rather than review lol
What have you done all that and you still ain't coming on
ABSOLUTELY THE SHITTIEST COMPANY IN VAPES -/ I’d rather go back smoking
is the geek vape website real cuz the fuckin thing is 90 bucks at my shop and online it’s 65 but the website seems shity and untrustworthy ?