I’m a permaculture farmer and been messing with electroculture and paramagnetism for a year. I see a lot of nonsense on TikTok but it’s a great method just need people like yourself with a brain to explain it and help the masses understand!Great work
@@smr-goll3877 U need a yagi antennas and boron Magdimium ring magnets that are strong and let one grow through the middle hole of boron magnet. but U have to seal it in a resin first, so it doesn't leach. Arials all copper or alloy. And a small tube cut off copper tube into soil to. To take out metals in soil. And if U want power lines with boron magnets on it with a magnet ring at each plant join led to a stainless steel line. With a battery and step up for ya own power to roots or and ether into Arial to an area of three feet squared for each Arial. Growth . And use tank water, with boron magnet and only plastic or rubber for water to run through. Tank water is rainwater, then off tank U have a hose to put a square massive boron magnet and wrapp hose around it four times and trickle the water past the magnet to drips for plants . Now there's the easy fast big way of electrical magnetic field resonance frequencys to use to if U would like or just some music to. For the plants. But use ring magnets of boron magnets sealed in resin and feed hose through centre. So water is reset memory and clean and best brain and body refreshed. Not shitta recycled toilet shower and sink water U drink with chemicals. Fuck no it's dead with no memory or knowledge
ok, something strange is happening here, Ken… I just learned of electro culture this morning and now here you are with a video on the subject. The synchronicities are fully synchronized, Ken. This is not a first time occurrence either! Your recent videos on metaphysics, magnetism, light… perhaps my devices are listening much closer than I thought and the algorithm is just doing its job. However it happens, I’m grateful for your videos.
There's electro-culture in the air/aether! Cuz I've seen it popping up on plenty yt channels, who wouldn't speak about this normally! Guess our connected consciousness is creating this. ;)
I planted my horizontal rods in December over winter. Now my garden is 3-4 times bigger, thicker, stronger and more productive than EVER before! It’s incredible!
@@cm9748 I didn t use the antenna method, I used the rod in the Earth method, with a magnet on one tip pointing north with the magnet also pointing north, and another magnet on the other tip of the rod with its south pointing south. And thats laid INTO the ground.
Yes awesome! I knew you would address this topic. There is no better man to address magnetism on UA-cam than you. Electroculture has made me interested in magnetism again, and I am thankful you have published so much information on magnetism. I am excited to add these techniques to my crops to help combat the anti farmer agenda.
wow so cool for many years iv known this and I built a 20 foot aluminum pole 3 sided pyramid and each end on the pyramid in the ground on top of loadstones i buried under them.. then covered the ground with magnetite dust. I swore my plants grow better. people just think i crazy. when i meditate under it holding the poles i can see the negative energy leave me. I feel so much better after doing that and that feeling lasts a very very long time, i swear
Finally a logical and deliberate description of antennas. 1) Does the ground wire need to be stripped of all sheathing? In other words, should the wire be bare? 2) Does the antenna need to be in any particular position or orientation relative to the plants? 3) Is the ground wire what delivers the "active ingredient"? If so, is there a length beyond which we'd get diminishing returns? 4) I have 2 sides of a square shaped property that I want to line with holly trees, 16 each side for a total of 32 trees/shrubs. The roots will probably be a 3 feet radius for a total of 6 feet, and the length of the 2 sides of the property is 100 feet + 100 feet for a total of 200 feet. Total area will be 1,200 feet, give or take. If a 12' by 8' garden can take 3 antennas, then I guess I'm not going to be able to do this. Would antenna height be something that could make this feasible? Sorry to ask so many questions. Really like your channel. Land values will crash in 2026, according the Georgist land cycle theory (Henry George).
Tldw, take some simple yagi antennas, ground them evenly spaced into the roots of all the plants. Basically plug TV antenna into roots. Electric muscle workout for plants.
Thank you for the awesome information on Electroculture. I've been using different methods since the mid 70s and I enjoy learning more in depth knowledge from videos like yours. Electroculture methods will increase plant growth and yields, I would encourage all gardeners to experiment with Electroculture.
There are many different copper coils which when placed around or next to plants are giving great results in boosting plant growth similar to electroculture. *Royal cubit length Tensor Rings *Slim Spurling Agricultural Harmonizers *Derrald Langham Genesa crystal coils *MWO Multiwave Oscillator Lakhovsky Coils. *Wilhelm Reich Orgonite / Cloud Busters with Tesla Bifilar and Mobius coils.
Wow!! So glad u addressed this!! I've been studying electroculture for a several years and it TRULY IS AMAZING!!! Been experimenting myself...I've been using simple methods ...after I've tried magnets in the garden suggested by YOU!! ;)
Thank You Sir, This is right up my street but it's gonna take me a while to wrap my head around the lingo ... Older Welsh Woman will now attempt this with wood and tape after spending hours and hours stripping copper wire from old electric cables ;-)
so glad more and more people are discovering electroculture, and it's great to have Ken who can explain the physics of it. in his book on electroculture, justin christlefleu has instructions to run a wire under the ground, about a foot deep, directed north. it's supposed to affect plants up to a distance of 7ft on each side of the wire. you can run the wire as long as needed. wouldn't this be better than having multiple antennae?
I will be trying Electroculture for my first time this year, 2023. I appreciate your knowledge and look forward to putting it into action. So much HisStory has been lots in the name of progress. Cheers 🍻
lmfao sounds like you have been watching my series by the description! Much love and respect my friend. I'd greatly appreciate 🙏 hosting you for a full episode of you setting things straight for the community. and yes, i am listening to every word you are saying and the geometry, structured water, and magnetics, and especially the dielectric induction behind all this. the structured water and the coloidal waters are my most developed tests in this field so far
I watched your electroculture episode. I'd never heard of electroculture before your show! and I was wondering if you knew of this channel and I see that yes indeed you do ♡ much love..
I heard about this a couple of months ago n thought I'd give it a go. Some bamboo stakes with copper wiring wrapped around and stuck a few in my pot plants as an experiment, well I can say it works. 🇦🇺♥️🙏
I love it. I used to install smart home security systems with my husband and we ended up with 1000's of feet of insulated 18/2 copper wire that the company didn't want to keep when we left the company.. My hubby packed those rolls around for years and always said one day they would come in handy... Well, last week He finally put them to use by stripping them and tightly wrapping old, aluminium arrows similar to a CB antenna. It must have been not even an hour ago that we were talking about how to test spacing of the antennas. Thanks Ken, we love your content. We are also curious if one of those massive 800$ magnets would structure water if the magnet were suspended in a large "copper still" type container? From what I've seen it would work as long as the water flowed around the magnet not unlike a vortex. Further more the water would give a nice safe distance between the magnet and any potential accidents? Whatever happens we are very exited to experiment!
This isn't New Age woow woow!! Thank you Ken, for showing the listeners and viewers, that human beings truly do have the ability to think and behave in a reasonable way and to make Good decisions!! You can learn so much if your listening skills are honed in.... Eternally grateful...
nor is cubit ( egyptian pyramids), nor crystal energy over thousands of years old, and nor is tensors ( slim Spurling)... check it out.. just because this guy doesn't know about crystal etc.. or how old 'new age' stuff really is doesn't make him right.. just ignorant. electroculture is only mid 18th century as far as I can tell but I could be wrong. personally I work with copper coil, cubits, and shunghite... sooo powerful and get abundance of produce. I've had farmers come through my community garden with such awe that I a beginner could have such a lush and pest free veggie garden - est 3000 sq. ft...
Ken, can you elaborate more on the grounding aspect? Could an RJ splitter be used to run multiple wires into the ground at different points only using 1 yagi? And should the wires be connected to it's own respective grounding rods? Wouldn't this be earthing? Please clear up my confusion, thanks. 👍
@@off6848 oh yes I like your explanation it clarifies some things... And even though I should have known all this it is apparent that sometimes you just need someone to break it down neatly. Cheers, friend
Ken, thank you for this primer! I may just try this out (spring IS coming, right?).. I wonder if you could explain further the spacing of grounding, the depth of the ground wires, and also do the ground wires simply jump off the main wire connected to the antenna driver? And is it the same wire (assuming it could be any copper wire, like romex) connecting in series to each of the antenna drivers if you have multiple yagis in an array, or each antenna has a separate wire? Thanks again, and I feel your tax pain...
Our gardens need all the help they can to avoid the “predicted”/ planed food shortages. Would like more explanations Not only about the depth of the ground, also the height of the antenna and the relationship between the two. Is having an current in the ground somewhat similar to making a colloidal solution where ions of the metal are attracted to the other electrode? As with other watchers, the synchronicities of the release of this video is serendipitous. That very same morning i found two antennas in the woods that i thought would work great for electro culture and then Ken pops on with the same style antenna. Thank you for being the smartest man on youtube.
I was wondering the same... Ken what height above ground would be most optimal to have the antenna? I was reading about an equation(can't remember) relating to height and dielectric charge ratio.
Man !! Right when I find something new that has to do with electricity or magnetism my main man ken comes out with a vid on it!!! My first year trying my hand at veggie garden and I found electro culture , which I have implemented a lil bit and I’m hoping correctly . Ty ken !!! ❤️🙏🏻 we are all one
Read the book ‘Cracking the Code’ the 1040 is a DONATION, it was first used by Lincoln to fund the Civil War, then it was done away with, it was again brought back during WWII, and the government just left it… only employees of the federal government are required to pay ‘income’ tax, the 16th amendment was never ratified… I hope some are inspired to look into this…
All you have to do is do a proper measurement of a royal cubit, twist the copper wire, connect in a circle and then feel the energy in the circle by placing your finger in, instead of kaiboshing it... prove it doesn't work first before trying to defend your way without proper experiencing it. I happened upon growing food 2012 and the power of copper, since then I've discovered not just tensor energy, slim spurling's cubit , but also orgonite...
Ken, if your Yagi antenna was mounted to a copper pipe in the ground does it still need to be grounded with rg58 coax or could you use common 14 gauge coated wire ? Also they show wires running under each row of vegetables is this needed or does the dielectric field distribute through the ground. On a 50 x 50 foot garden could you put an antenna 10 foot in the air at each corner and would it be enough. They say every 10 feet above ground there is 100 volts of electricity in the air so would a higher antenna have a greater effect and cover a larger area. They also talk about orienting a magnet north and south with the earth and running a wire through the magnet with the wire running north and south to distribute the magnetism along the wire with plants above them. Does this also create a dielectric field?
Get the book Justin Christofleau, electrocultural patients, it should answer all your questions. I have a communication/antenna/rf background, the book is a great start and u do not need rg58 for this purpose. Isolate antenna from tower/ground, run copper or aluminum wire from antenna to the spot your plants are, at that point strip insulation from wire. Book explains grids you can put in garden to spread the voltage. Have fun, I built 15 antenna's last month in various designs. We are capturing volt. not a specific frequency, thats why the antenna design and grd isolation is different.
Thank you . Very interesting information. I have tried it on a small scale in my kitchen and it worked very well. I am making a large array out of 3/4’ copper for my summer garden. Thank you so much for the information. You are on the correct life path. Thank you. Much love.
I have begun experimenting with electroculture and using old copper telephone cables. At the top I strip off the protection material (10 cm) so it looks like the antenna is a bunch of hairs pointing outwards. Also the cable is put clockwise into the ground. Both the Ficus cutling and blueberry in big pot are just burstling with life! Now I think these two factors contribute greatly to harvesting the electricity from the air into the ground. Now I still need to experiment with putting the copper deeper underneath the root system (like hairs)
@@scottsosebee8638 I stripped the top for about 3 inches, but not yet the bottom, as the wire I used is quite thin. The top is curling outwards in multiple directions, which might contribute to the intake of energies. The Ficus and some fruit trees love it
@@DennisDinges Thanks for your quick response. I have about 60 ft. of 14 gauge, insulated stranded wire and will experiment with it and see what happens.
You're the Guru, I'm using a computer charging unit with the hot side pushed on a copper rod and a 26 gauge ground over to another rod and the plant is growing fantastically. I been watering it with hydrogen water and ozone water......
Sounds very interesting Ken. Perhaps in a future video, you could supplement it with a few diagrams, which would be very helpful. For example, how would you do this for single container pots? 👍🏻✨⚡️💡⚡️
The first thing my GF said was "why didn't he do a few diagrams to help us lesser mortals understand this a bit better"? As the saying goes "a picture paints a thousand words".
Hi Ken. This is an interesting subject to me, as someone who has studied Paul Pantone's geet reactor and having just planted a garden that uses my travel trailers grey water... I want to know more about how I can implement one of these systems to keep my plants happy going into Phoenix summer time... they will probably also like my shade structure I just built. Thanks for this suggestion!
i found a study a while back where u can use magnets to soften ,charge water out of the hose or funnel into bucket.its 2 rows like equal sign and you place the hose in between .first pair at water entering ,top and bottom N/N ,S/S ,N/S, N/N, water exits my plants love it ,cool channel sir.
I once had a broken housing on the UVC sterilizer in my hydroponic bubble cloner. At first I thought I was crazy as I could feel a tingling sensation when I ran my hands through the leaves of the cuttings. I learned to unplug it before touching anything but continued to use it because it made roots faster and healthier than anything else I'd ever used. Eventually I figured out the housing had been broken when I'd received it and replaced the unit. Never repeated the experiment for obvious safety reasons...lol...anyway....
@@ThatThing1675 not the UVC (that kills the bacteria in the water) - just the current in the water - the bulb shroud was broken and the bulb was exposed directly to the water (including the socket it was plugged into...)
Does the RG58 need to be wounded around the centre shaft all the way down past the reflector and thereby contact the reflector? Or is the RG58 only meant to contact and touch the driver part only without touching the reflector as it gets wound around the centre shaft?
I absolutely loved the TENS therapy on my back after it was injured! That hot, intense tingley feeling was amazing on my beat up hinges. I just about melt thinking back on it. Might have to look into getting one of the home units.
@@MychelleSeymourHeyyouremember Yes/no. The therapy was only somewhat helpful. I kept going back, because I was seeing the tech at the time. We found fun, new places to put the TENS electrodes.😛
@@ikonseesmrno7300 okay but seriously you realize you were scammed? If you didn't realize it.... I'm literally telling you right now you're being scammed. 😔 but it's okay because I forgive you.😘
How many for 30’x100’? So you strip of the shielding, expose the center conductor and wrap it around the receiver rod, then install the other end of the shielding beneath the roots of the plant. Where does the opposite ends of shielding or conductor go or do they just terminate? Shielding to ground on dirt end and conductor to yagi on sky end?
This technique combined with SonicBloom technology (useing a specific frequency to open the pores of leaves prior to watering/feeding) would be extremely interesting to test. Effective feeding/watering at both ends of a plant. Thanks for another great video.
If you take a head of lettuce and chop off the top and leave the stem and stick it in a cup of water, leave it by the window for light of course, it will start growing again.!! Which I was skeptical about, but after a while it will grow. Its amazing. Plants and nature are amazing. Since food is going to be an issue for all of us, who knows what other plants can work this way? Food dependence equal freedom .
Question on grounding, with a large 40x120 area raised bed garden, do you still suggest 1 yagi per corner, and ground each separately below the root zone (at base of raised beds) or must the grounds be connected? Could the ground/yagi mount be the same, say a driven copper pipe?
Good questions. I have a 1200 sq. ft. area (6' x 200') that want to plant 24 to 36 holly trees on. I'd like to know what the range is for one yagi antenna. His example of an 8' x 12' garden is basically a children's sandbox - not very useful.
Great video, thanks! With hydroponics this summer I'm going to run a simple grounded conductor into the tanks for both Kratky and NFT systems. If I drop the wire from a yagi into the grounded tank fluid, I guess it's electrically the same as tying directly to the ground line since the nutrient fluid is conductive. Is that right, or should the yagi line bypass the fluids altogether and just go to ground for an aerial-only effect on the plants? Or maybe lines from the grounded yagi running just under the plastic containers, but not immersed in the fluid, near the roots for both the flow or Kratky systems? Looks like some A/B testing this spring.
What a coincidence. I get to move into my property next week with a large garden, I have already stocked up on garden stakes and uncoated copper wire (well, 10m worth). I guess I’m going to do it the fancy way because that is all I have seen. And yes, I agree, the videos that I have watched are very vague. Thank you ever so much for the explanation.
I did a magnet/seed experiment in 2019. Here in the Southern hemisphere the north pole of a magnet works best. I also found that exposing seeds to both north and south poles at the same time significantly stunts growth.
Ken You really are a God send & this is one of the reason's I love your channel. You make the most uniques video's & cut through all the bs out there & explain how things actually work. I'll be watching this video many times as it was a bit to take in & you seemed to be talkig very qucikly, as if you had a train to catch or something. Thank you soo much for all you do for humanity.
Ken, positive waves 🌊😊👍. You post things about stuff I am currently curious about all the time! I hope this helps my Medical 🪴🪴🪴🪴🪴 . Your such an endlessly positive person. Secret Santa 🌝
Been watching your videos on electricities and magnets found some seed videos wondering if you can show us visual learners how to make a good electro culture system for at home gardening indoor & outdoor your videos make me feel smarter 😂
Electroculture is Trending!!! we just started a new series of agricultural science test and videos coming out. Ken I'd love to have you on for a proper explanation on this subject
Thanks man, was busy researching this too. Your magnet videos 7 years ago are still the best. Would this make a difference to aeroponics tower systems I wonder. A internal spiral from bottom of the water reservoir out the top and above the tower. What do you think? Maybe a small difference since the roots and uptake is already much optimised, maybe it will help with pests and the leaves side of things?
It is in fact quite easy to show that all plants react to changes in the environment. They react to light, temperature and many other factors, for example rain. We can detect that by simply measuring the electrical currents that flow in their bodies. These are very similar to those we measure in human heart-, muscle- and braincells. This has been known since the discovery of electricity, but only today we can measure this easily, with off-the-shelf parts. I am continuing this research: ------ Intro-Understanding the electrical signals of Plants: ua-cam.com/video/drlYvZ8YCZE/v-deo.html ---- What plant signals look like: ua-cam.com/video/qdTxhaxjXxg/v-deo.html ---- How to build a simple Plant Voltage Recorder-Part 1: ua-cam.com/video/Cl2CVbAjqY4/v-deo.html
Good subject, but if you are still open minded enough, look at gei- engineers, and how they are contaminating our souls with aluminum,which ruins the ph.of the soil for ,plant uptake work.
Thank you. You might want to add spinning to increase the range of the device's effect perhaps by orders of magnitude. IOW, one braided coiled unit on a fan could cover acres and acres. To braid the copper, fold a length of copper in half and twist it with a drill. before coiling it on a wooden pole.
We all think Ken knows so much. But I know Ken has a big blind spot. Therefore I know his understanding is diminished by this. I understand electroculture theory of putting a charge into the ground near your plants. It will affix nitrogen to the roots therefore no need to buy fertilizer. I have read the book by Christofleau which coined the term Electroculture, (title of the book) and studied how the device was made and used and how it captured magnetic energy from the Earth. I have read a lot about Viktor Schauberger and his agricultural practices. All of it fits together. I also understand Yagi and radio antenna physics/electromagnetics. I have made my own Yagi from scratch. So now Ken says that the thing Christofleau was doing can be replicated by a 2 meter 3 element Yagi??? Each antenna resonates with a certain wave length. The metal resonating produces micro volts and micro amperes of electricity in the coax. The Yagi Ken is holding is reactive to frequencies bear 144 - 148 mega hertz the 2 meter ham radio band. Really that is going to produce the 7 foot long oat stalks shown in Electroculture? Really Ken?! You let us all know you pay your taxes. Someone as smart as you surely would know how to not be a citizen ie trustee the one who pays in the trust triad. Surely such an intelligent human would not be supportive of the masonic ball. Surely a very intelligent astute observer would believe only what is provable, but no, not Ken. He firmly support a model with ZERO proof. All the time saying there is proof. Any electric in the ground can help. But from what I've studied and then hearing him give directions which strangely always leave out the actual brass tacks of exactly how it's done. No you guys didn't miss anything. He NEVER made it clear what you do with the center conductor. He kept repeating "it has to be grounded." So the outer braid or coax shieldiing must be grounded?? Yes he said that. But what about the center conductor?? No he didn't explain what to do with that. If you ground them both then there can be no charge differential hence no voltage or current even micro. Did he even bother to say Ground the outer braid to one location and the center conductor to a place 5 or 10 feet away? No he didn't say that. That's why there are over 15 comments begging for an exact explanation, Because he didn't give one! No. This guy is a Narrative spreader. He believes in theories that have remained without proof for 500 years. He's just trying to short circuit your faith in Electroculture by substituting a weaker than water explanation of it which makes any effect so small you will give up on it and never see the real thing.
Yeah brother only those few left of us with eyes to sea, can spot these narrative spreaders, He didn't emphasize height and completely disregarded the IMPORTANCE of shape. I know there must be a way to get those giant fruits that are mentioned in the bible, but too much deliberate misinfo, makes for, in the best case great results, but still not exceptional. Same thing they've done with watering down each potential booming field like above unity and the likes. Anyway coming back to your last paragraph, instead of grounding center and outer coax conductors in different places, wouldn't two copper pipes mounted at different places do the job. Or better yet, a tesla style bifiliar wounded wooden stick going 30ft high?
I fell for that concept as well. I wasted a lot of time and money by inserting a small stick, wrapped in plain copper wire with a nice vortex top, stuck in every single plant pot in my house, to include all the plants in plastic pots sitting outdoors. It did NOTHING! Plain dirt encased in a rubber pot is not grounded. The earth outside is grounded. Same thing applies to these claims that you can hook up an electroculture wire to some metal piece within your vehicle so you can be grounded when driving. Ridiculousness! The car sits on rubber tires so therefore there is no grounding conductivity between the earth and your vehicle.
Super thrilled you have taken on this subject as I have been disappointed at all the confusion and lack of finished efficient design application on this subject.
Deuteronomy 28:40 You will have Olive Trees (the Tree of Life) throughout all your territory. This method of electroculture should keep the roots from freezing thus allowing us to grow Olive Trees everywhere. Thank you Ken!
Would there be any benefit to taking a Coaxial cable, stripping the shielding and putting it deep into the soil of a potted plant? Or do you need the antenna for it to work? I just looked into building the Yagi antenna and it seems complicated But I was looking at one someone made that can transmit 2.4 GHz WiFi So maybe thats why, lol. Would love a video on a really simple Yagi antenna build thats specifically for electroculture.
So I watched this again after educating myself a little more on Yagi antennas... And I gotta admit man, you ain't bsing. I see you're frustration with the electroculture antennas being made, they are super elaborate for no reason. The materials used in a couple of those spirals could setup a large area properly with a simple Yagi array.
I wonder if With little minerals in the soil. Plants have less magnetic connection to the Sun. I used to use electrolysis to make Gold water ,silver, iron ,water. And pour in the soil and mist the whole area. And all different powder minerals in the soil. Size of plants were normal to large. But the colors , taste ,smell and oils ext. We're absolutely next level. And when juicing or slicing there was a oil layer at the cut. The real oil of the plant. Everything at the store is dry. Wet lettuce that's actually dry. On essential oil no vitamins. No minerals. That's why we have to salt everything. Good Soil makes good Oil.
I wouldn't be so quick to discount the effect of the Pyramid geometry, there is another effect in place that occurs when using that shape. If you're not familiar with it there is a book called "The Pyramid how to build it how to use it" by Les Brown 1978, that is specifically on crop growth, he observed interesting Magnetic behaviors using the geometry that had these growth boosting effects on plants as well as preservation effects when the sides were properly oriented to magnetic N-S. This also matches up with the research of Dan Davidson which you can read about in his book "Shape Power" where he focuses on the effects geometry has on the Aether, I believe the same principles are in effect when it comes to the Pyramid. And like you said this isn't some "new age" stuff, this is verified through experiment. In both books the authors make note of phenomena that occur in the tips of the Pyramid, in Les Browns book he believed the Pyramid accumulates charge in the structure through its apex tip until it reaches capacity before it release it out the top and sides of a ratio of 80% to 20% before repeating, like a breathing cycle. In Dan's book, he observed that a Positive charge formed at the tips while a Negative charge formed at the core at 1/3 height, likely because the Aether builds up charge at intersecting lines, I also have reason to suspect that because of this the Pyramid is the arch form needed to take advantage of the time variable in a magnetic field, such as the Earth's MF, to be able to extract electric power without a moving component. Anyway, Les Brown had phenomenal growth and preservatory effects from using Pyramid geometry on plants and food, so there is something to using it for different effects. Brown built his out of wood, and Dan's research showed a stronger charge buildup in a metal frame compared to an insulating material, and both authors confirmed that the structure did not need to be closed, just the frame was enough for the effects to occur, and these experiments have since been recreated by others so the effect is verified. I do wonder how the Dielectric Induction takes place in this case though, not to mention no contact with the roots.
Thank you! So one interview i saw where he says just wind copper wire around the stick with a lodestone or quartz on top and wind the wire around that too - so could we use shungite on the top of the wooden stick? That's the only crystals I've got lying around the house!
Are you explaining to us how to influence the roots to grow down? Can I offer you a better way to go about it? Water real deep! Possibly a drip system? I remember back in in a day the best Garden I ever had was when I had a drip system. 🤔
Thank you for talking about this but I think a lot of the copper stuff is just for beautifulness just for fun and it's a work of art for everybody to enjoy especially all the birds thank you so much for talking about electric culture
I have # 2 4 giage solid copper rg6 rg 11-.500 coax aluminum. Im guessing diameter is not that issue to generate the spark we want. Would it be more effective to run 4 rg11 leads up a tree or tower? My greenhouse is next to a 40 ft tree. My growing bed is 10’x3’x3’ dug out of ozark rock soil. The box is tarped below and filled with premium soil. Should i peirce the tarps with ground rods connect them to the coax also on that antenna do i connect the jack and stinger to 1 ground or to 2 seperate grounds?I have a mist irrigation system to keep the temp down in the greenhouse during hot days. I appreciate the video and any imput. I have to get in that tree today and trim a limb anyway.
No wu wu with u im glad i had limited success on electrical hack projects and didnt know about. That. Your knowledge has made my hobby so much more fun
I use a black square to receive local news. Facing aluminum foil at back of antenna works great. Curious how that relates. More importantly, how important is covering your crops?
I was just searching up some info on this topic and you just did a video on it. A real coincidence for a change lol. But anyway I always watch, you've taught me a lot. I've never subbed cause I usually watch without signing in so I just did. 👍 Thanks Ken
This is so cool I have been a serious Gardner for a long time in this past month started planting with electroculture in mind ... One question that would be cool to answer would be how much area would one yaggie array once grounded how much area would it affect
Please Excuse me if this is already answered. I’ve read conflicting information on running the ground wire through your garden. Obviously antenna north. But at that point I’ve heard running your wire west through the grow plot and eventually grounding south. VS running the wire clockwise (and eventually grounding south) in the northern hemisphere.
Yeah. Thx much .. good info.. Can you tell me why not Pyramids and certain structures? As you mentioned against them.. What real world experience you Hava? What about the book. "Sacred Stewardship" Charles Hubbard..
Hi Ken, thanks for another great video 👍 Could we possibly make a similar simple device to hook ourselves up to for health/healing benefits do you think? If so and you could do another video that would be amazing 🙂.
Thank you for actually explaining this. I've been very interested in this topic but I really wanted to find the whys and the actual practical application. I appreciate how you cut through the crap. It's always an honor, privilege and pleasure to learn from you.
Thanks for covering this topic Ken. I noticed in the other comments, people asking about frequency. Would a harmonic of the schuman frequency be more / less effective? I guess I just proposed my own experiment. Lol!
If solder is not used than using ANTIOXIDANT or NOALOX for electrical connections will help reduce the degradation of dissimilar materials from corroding or rusting. It reduces the resistance from perpetual corrosion.
Thank you very much Ken! How thick do you need the wire and where do you connect it to each element? Can the wire be braided wire? I've got a lot of thin braided copper wire (with plastic coating) lying around that I would love to use if possible. Finally how far up should the antenna be mounted? I've seen electroculture suggest 20' in the air (now that I know what the antenna is - thank you!) I really appreciate your videos. I had my kids do science projects on the magnetic seed experiments thanks to you.
It can't have a plastic outter, it needs to be just simple copper wire. Don't over think it, a 12 volt battery and small solar panel will work if you have a way to regulate the power into the loop
New Age quakery is in fact thousands of years old come back new to us.. Electroculture is est. mid 18th century. what does LCD stand for? crystals are powerful and can affect positive change with our plants.. try it and prove me wrong.
Hello, Ken; Thank you for this video, I'd heard of this but I thought it was kinda' woo-woo. But your explanation led me to some research that substantiates what you said, & more. I want to make an electroculture antenna & I remembered your statement re: 'yagi' antennas. So I searched for "homemade yagi antenna". I found antennas, they are/can be tuned to the frequencies intended for reception. So now I don't know what frequency my antenna should be tuned to. Can you recommend a frequency or frequency range, please? I think this is going to be extremely important in view of likely coming food shortages. So if everybody will start growing some food now, using electroculture, it could really help. Keep up the good work, too many have already capitulated to TPTB, & the MIC. Have a GREAT day, Neighbor!
Not only in the electroculture items for in the garden in various videos, I noticed that a lot of things that uses copper coils for growing & other things, even in the "woo-sphere", they all insist that the northern hemisphere items be wound clockwise & southern hemisphere items be wound widdershins (counter-clockwise). Yes, I prefer widdershins. I like the sound of the word. laughing... In the northern hemisphere, bean, pea, & other vining plants always grow their tendrils counter-clockwise when they wind around a trellis or pole & the opposite is true in the southern hemisphere, they wind around clockwise. Same goes even for flushing the toilet in the two hemispheres. My silly question is- If the natural direction goes one way, why in the world would people be saying to go the opposite direction when making copper coils for whatever it is that is supposed to flow "naturally" in one's hemisphere they currently reside in? It makes no sense. Nope, I have not one scientific bone in my body, but I am great at growing a lot of our vegetables & the "alchemy" of canning & cooking. (big grin) One day I'll find the correct magnet & use your method for the seeds before planting. That was a great experiment & very well done. Thank you, I actually understood it. (smile)
You say you don't "have to" make the vortex. When you say vortex, I'm picturing these spirals I keep seeing. I've made your yagi design and I believe it's working really well but I feel like spiraling the wire, rather than the yagi design you have another video on, would require less work and materials, assuming it gets the job done the same. Any thoughts? Am.i missing something?
Thank you for explaining this important subject in simple terms and explaining that it doesn't have to be expensive. In a future video could you also talk about how and whether or not this cuts down on insect damage. Is it because of the plants being healthier to begin with or some other thing or does it affect bug damage to plants in any way. Thanks!
I've been interested in this for years but only have a loose understanding, I have an old TV antenna and a bunch of raised beds, can I run wires off the antenna to each pot? Also do I need plates buried in the soil? Please make another vid about this, but I get magnetic seed exposure. I need info about the other types of electroculture. Love your vids, thanks!
..nice ken, i just learned about electroculture last week...i then proceeded to empty out all the hobby shops and h depots n hdware stores that actually had any copper left...imo, lots of people are hearing about 30% less watering, less fertilizer, no pesticide, with more fruit and veggie yields ...im glad to hear that alum will work too...🌞 i for 1 will appreciate any and all of your present n future explanations of this method... ...and ...please look at the mfc videos too...due to the grand solar minimum i think most outdoor growing may need to come indoors with grow lghting...the gsm may bring darker days to our growing seasons...therefore solar panels wont be as effective...im experimenting with a few diy microbial fuel cells that i can help run the grow lights indoors...(earthberming our house/shelters would save us a lot of heating fuels as well)...
I sleep on a copper wire that's ran out my window into ground when my hand or arm fall asleep at night I grab wire and feel blood rush back into my hand it feels crazy grounding the human body has major benefits 5yrs now I never wake up stiff sleep like a baby
I used to have an electronic muscle stimulator, basically a tens unit but more like the one Bruce Lee used. It was great for recovery but it doesn't in anyway replace exercise. One could literally sit around with one all day for months and not build mass. Have to build mass the old fashioned way, then use the machine to help with the soreness and flexibility.
I have 30 ft of pole with a big boy TV antenna, I found in our barn. From the 90s. Can I use that and run a ground wire down and splitting more wires from that down into my flower pots? I'm doing raised beds. Nothing on the ground. Please help!
With your knowledge of this technology, Ken. Could we not wirelessly transmit and receive the energy between gardens and cities? Kinda like gold capped pyramids with mercury pools beneath them or those high antenna like shapes on old buildings seen searching Tartaria? 😳
I’m a permaculture farmer and been messing with electroculture and paramagnetism for a year. I see a lot of nonsense on TikTok but it’s a great method just need people like yourself with a brain to explain it and help the masses understand!Great work
Easy as if U know. And everything is simple . Once U know.
Does IT work If the plants are touching the antenna?
That’s what I’m saying
@@smr-goll3877 U need a yagi antennas and boron Magdimium ring magnets that are strong and let one grow through the middle hole of boron magnet. but U have to seal it in a resin first, so it doesn't leach. Arials all copper or alloy. And a small tube cut off copper tube into soil to. To take out metals in soil. And if U want power lines with boron magnets on it with a magnet ring at each plant join led to a stainless steel line. With a battery and step up for ya own power to roots or and ether into Arial to an area of three feet squared for each Arial. Growth . And use tank water, with boron magnet and only plastic or rubber for water to run through. Tank water is rainwater, then off tank U have a hose to put a square massive boron magnet and wrapp hose around it four times and trickle the water past the magnet to drips for plants . Now there's the easy fast big way of electrical magnetic field resonance frequencys to use to if U would like or just some music to. For the plants. But use ring magnets of boron magnets sealed in resin and feed hose through centre. So water is reset memory and clean and best brain and body refreshed. Not shitta recycled toilet shower and sink water U drink with chemicals. Fuck no it's dead with no memory or knowledge
@@smr-goll3877 most definitely bro I'm the smart one that love magnets and coils and hydrogen fuel cells and making batterys ect
ok, something strange is happening here, Ken… I just learned of electro culture this morning and now here you are with a video on the subject. The synchronicities are fully synchronized, Ken. This is not a first time occurrence either! Your recent videos on metaphysics, magnetism, light… perhaps my devices are listening much closer than I thought and the algorithm is just doing its job. However it happens, I’m grateful for your videos.
There's electro-culture in the air/aether! Cuz I've seen it popping up on plenty yt channels, who wouldn't speak about this normally!
Guess our connected consciousness is creating this. ;)
Same, YT is promoting it
You talking about the short with the former navy seal?
haha me as well, heard of it the first time yesterday myself
Or- the more you look; the more you see 🤷🏻♂️
I planted my horizontal rods in December over winter. Now my garden is 3-4 times bigger, thicker, stronger and more productive than EVER before! It’s incredible!
the horizontal rods run from south to west ? does it matter which way you point your Yagi antenna ?
@@cm9748 Yeah South to North is ideal.
@@farceadentus and the antenna should point 40 degreees in what direction ?
@@cm9748 I didn t use the antenna method, I used the rod in the Earth method, with a magnet on one tip pointing north with the magnet also pointing north, and another magnet on the other tip of the rod with its south pointing south. And thats laid INTO the ground.
@@farceadentus Is it what's also called a magnetic antenna?
Yes awesome! I knew you would address this topic. There is no better man to address magnetism on UA-cam than you. Electroculture has made me interested in magnetism again, and I am thankful you have published so much information on magnetism. I am excited to add these techniques to my crops to help combat the anti farmer agenda.
wow so cool for many years iv known this and I built a 20 foot aluminum pole 3 sided pyramid and each end on the pyramid in the ground on top of loadstones i buried under them.. then covered the ground with magnetite dust. I swore my plants grow better. people just think i crazy. when i meditate under it holding the poles i can see the negative energy leave me. I feel so much better after doing that and that feeling lasts a very very long time, i swear
I would love to see the structure you're speaking of here. Would you be interested in doing an instructional video?
@@nyksik001 yea post it up! Please!
So much knowledge, Tesla would be proud of you for helping people acquire independence from the corporation's!
Finally a logical and deliberate description of antennas.
1) Does the ground wire need to be stripped of all sheathing? In other words, should the wire be bare?
2) Does the antenna need to be in any particular position or orientation relative to the plants?
3) Is the ground wire what delivers the "active ingredient"? If so, is there a length beyond which we'd get diminishing returns?
4) I have 2 sides of a square shaped property that I want to line with holly trees, 16 each side for a total of 32 trees/shrubs. The roots will probably be a 3 feet radius for a total of 6 feet, and the length of the 2 sides of the property is 100 feet + 100 feet for a total of 200 feet. Total area will be 1,200 feet, give or take.
If a 12' by 8' garden can take 3 antennas, then I guess I'm not going to be able to do this.
Would antenna height be something that could make this feasible?
Sorry to ask so many questions. Really like your channel.
Land values will crash in 2026, according the Georgist land cycle theory (Henry George).
Tldw, take some simple yagi antennas, ground them evenly spaced into the roots of all the plants. Basically plug TV antenna into roots. Electric muscle workout for plants.
Thank you for the awesome information on Electroculture. I've been using different methods since the mid 70s and I enjoy learning more in depth knowledge from videos like yours. Electroculture methods will increase plant growth and yields, I would encourage all gardeners to experiment with Electroculture.
There are many different copper coils which when placed around or next to plants are giving great results in boosting plant growth similar to electroculture.
*Royal cubit length Tensor Rings
*Slim Spurling Agricultural Harmonizers
*Derrald Langham Genesa crystal coils
*MWO Multiwave Oscillator Lakhovsky Coils.
*Wilhelm Reich Orgonite / Cloud Busters with Tesla Bifilar and Mobius coils.
Georges Lakhovsky 👍and more astonishing is UKACO device.
Wow!! So glad u addressed this!! I've been studying electroculture for a several years and it TRULY IS AMAZING!!! Been experimenting myself...I've been using simple methods ...after I've tried magnets in the garden suggested by YOU!! ;)
Thanks for sharing!!
Does electroculture Work, If the plants are touching the antenna?
Would LOVE if you'd consider doing another detailed video on this topic! I'm wholly intrigued to say the very least.
Thank You Sir, This is right up my street but it's gonna take me a while to wrap my head around the lingo ... Older Welsh Woman will now attempt this with wood and tape after spending hours and hours stripping copper wire from old electric cables ;-)
so glad more and more people are discovering electroculture, and it's great to have Ken who can explain the physics of it. in his book on electroculture, justin christlefleu has instructions to run a wire under the ground, about a foot deep, directed north. it's supposed to affect plants up to a distance of 7ft on each side of the wire. you can run the wire as long as needed. wouldn't this be better than having multiple antennae?
I'm wondering the same thing, especially because I want to implement it in the 50 acre farm I work at
I will be trying Electroculture for my first time this year, 2023. I appreciate your knowledge and look forward to putting it into action. So much HisStory has been lots in the name of progress. Cheers 🍻
lmfao sounds like you have been watching my series by the description! Much love and respect my friend.
I'd greatly appreciate 🙏 hosting you for a full episode of you setting things straight for the community.
and yes, i am listening to every word you are saying and the geometry, structured water, and magnetics, and especially the dielectric induction behind all this.
the structured water and the coloidal waters are my most developed tests in this field so far
Methinks this would be a very worthwhile and instructive collaboration.
@@MarvelousOldWorld Thanks you! Me too!
I watched your electroculture episode. I'd never heard of electroculture before your show! and I was wondering if you knew of this channel and I see that yes indeed you do ♡ much love..
BERNIE!!!!! BRO
@@cryptoalchemist369 is this also your channel name?
can you draw a simple diagram for a rectangular plot? and a diagram of the antenna in its simplest form pleeeeese?
I agree, do it Ken for us lesser mortals.
@@kryptofreedommedia1899 for the combobulated !
Yes please!
I heard about this a couple of months ago n thought I'd give it a go. Some bamboo stakes with copper wiring wrapped around and stuck a few in my pot plants as an experiment, well I can say it works. 🇦🇺♥️🙏
Just wrapped copper wire around a bamboo stick, placed in the potted plant?
@@ArayaLight yes, wrapping around from the bottom of stick to the very top. 🇦🇺♥️🙏
@@risenshine3076 awesome thank you ❤
the easiest and most helpful advice you could ever dream of sharing with people in light of what we're collectively facing. series, please Ken.
Aye.
I love it. I used to install smart home security systems with my husband and we ended up with 1000's of feet of insulated 18/2 copper wire that the company didn't want to keep when we left the company.. My hubby packed those rolls around for years and always said one day they would come in handy... Well, last week He finally put them to use by stripping them and tightly wrapping old, aluminium arrows similar to a CB antenna. It must have been not even an hour ago that we were talking about how to test spacing of the antennas.
Thanks Ken, we love your content.
We are also curious if one of those massive 800$ magnets would structure water if the magnet were suspended in a large "copper still" type container? From what I've seen it would work as long as the water flowed around the magnet not unlike a vortex. Further more the water would give a nice safe distance between the magnet and any potential accidents? Whatever happens we are very exited to experiment!
This isn't New Age woow woow!! Thank you Ken, for showing the listeners and viewers, that human beings truly do have the ability to think and behave in a reasonable way and to make Good decisions!! You can learn so much if your listening skills are honed in....
Eternally grateful...
nor is cubit ( egyptian pyramids), nor crystal energy over thousands of years old, and nor is tensors ( slim Spurling)... check it out.. just because this guy doesn't know about crystal etc.. or how old 'new age' stuff really is doesn't make him right.. just ignorant. electroculture is only mid 18th century as far as I can tell but I could be wrong. personally I work with copper coil, cubits, and shunghite... sooo powerful and get abundance of produce. I've had farmers come through my community garden with such awe that I a beginner could have such a lush and pest free veggie garden - est 3000 sq. ft...
Ken, can you elaborate more on the grounding aspect? Could an RJ splitter be used to run multiple wires into the ground at different points only using 1 yagi? And should the wires be connected to it's own respective grounding rods? Wouldn't this be earthing? Please clear up my confusion, thanks. 👍
I don't understand it at all, if you have anything with pictures or a blog that explains it more clear please share .
His explanation meant nothing to me.... complete goobly goop.
@@off6848 oh yes I like your explanation it clarifies some things... And even though I should have known all this it is apparent that sometimes you just need someone to break it down neatly. Cheers, friend
Ken, thank you for this primer! I may just try this out (spring IS coming, right?).. I wonder if you could explain further the spacing of grounding, the depth of the ground wires, and also do the ground wires simply jump off the main wire connected to the antenna driver? And is it the same wire (assuming it could be any copper wire, like romex) connecting in series to each of the antenna drivers if you have multiple yagis in an array, or each antenna has a separate wire? Thanks again, and I feel your tax pain...
Our gardens need all the help they can to avoid the “predicted”/ planed food shortages.
Would like more explanations Not only about the depth of the ground, also the height of the antenna and the relationship between the two.
Is having an current in the ground somewhat similar to making a colloidal solution where ions of the metal are attracted to the other electrode?
As with other watchers, the synchronicities of the release of this video is serendipitous. That very same morning i found two antennas in the woods that i thought would work great for electro culture and then Ken pops on with the same style antenna.
Thank you for being the smartest man on youtube.
I was wondering the same... Ken what height above ground would be most optimal to have the antenna? I was reading about an equation(can't remember) relating to height and dielectric charge ratio.
Man !! Right when I find something new that has to do with electricity or magnetism my main man ken comes out with a vid on it!!! My first year trying my hand at veggie garden and I found electro culture , which I have implemented a lil bit and I’m hoping correctly . Ty ken !!! ❤️🙏🏻 we are all one
Read the book ‘Cracking the Code’ the 1040 is a DONATION, it was first used by Lincoln to fund the Civil War, then it was done away with, it was again brought back during WWII, and the government just left it… only employees of the federal government are required to pay ‘income’ tax, the 16th amendment was never ratified… I hope some are inspired to look into this…
All you have to do is do a proper measurement of a royal cubit, twist the copper wire, connect in a circle and then feel the energy in the circle by placing your finger in, instead of kaiboshing it... prove it doesn't work first before trying to defend your way without proper experiencing it. I happened upon growing food 2012 and the power of copper, since then I've discovered not just tensor energy, slim spurling's cubit , but also orgonite...
Ken, if your Yagi antenna was mounted to a copper pipe in the ground does it still need to be grounded with rg58 coax or could you use common 14 gauge coated wire ? Also they show wires running under each row of vegetables is this needed or does the dielectric field distribute through the ground. On a 50 x 50 foot garden could you put an antenna 10 foot in the air at each corner and would it be enough. They say every 10 feet above ground there is 100 volts of electricity in the air so would a higher antenna have a greater effect and cover a larger area. They also talk about orienting a magnet north and south with the earth and running a wire through the magnet with the wire running north and south to distribute the magnetism along the wire with plants above them. Does this also create a dielectric field?
but you need to REMOVE the coat from the part going to the ground...but yes you can use same
Would be so fabulous if you had time for a diagram of this for us 😊 Thank you, great info.
Get the book Justin Christofleau, electrocultural patients, it should answer all your questions. I have a communication/antenna/rf background, the book is a great start and u do not need rg58 for this purpose. Isolate antenna from tower/ground, run copper or aluminum wire from antenna to the spot your plants are, at that point strip insulation from wire. Book explains grids you can put in garden to spread the voltage. Have fun, I built 15 antenna's last month in various designs. We are capturing volt. not a specific frequency, thats why the antenna design and grd isolation is different.
Making them beautiful is just a preference to add beauty to your garden.. I just wrap the copper around a pole - plain and simple!
Thank you . Very interesting information. I have tried it on a small scale in my kitchen and it worked very well. I am making a large array out of 3/4’ copper for my summer garden. Thank you so much for the information. You are on the correct life path. Thank you. Much love.
can you please send a practical link? Much appreciated
Awesome! Now we can use
I have begun experimenting with electroculture and using old copper telephone cables. At the top I strip off the protection material (10 cm) so it looks like the antenna is a bunch of hairs pointing outwards. Also the cable is put clockwise into the ground. Both the Ficus cutling and blueberry in big pot are just burstling with life! Now I think these two factors contribute greatly to harvesting the electricity from the air into the ground. Now I still need to experiment with putting the copper deeper underneath the root system (like hairs)
Sounds like good results. Are you coiling the cable into the ground? In a clockwise direction>
@@barnabyvonrudal1 Yes, exactly this. Though not as deep below the roots yet. I guess that could be a bit more effective...
Hello, so using insulated wire is ok as long as the ends are stripped a foot or so at the top and stripped back before entering the earth ?
@@scottsosebee8638 I stripped the top for about 3 inches, but not yet the bottom, as the wire I used is quite thin. The top is curling outwards in multiple directions, which might contribute to the intake of energies. The Ficus and some fruit trees love it
@@DennisDinges Thanks for your quick response. I have about 60 ft. of 14 gauge, insulated stranded wire and will experiment with it and see what happens.
You're the Guru, I'm using a computer charging unit with the hot side pushed on a copper rod and a 26 gauge ground over to another rod and the plant is growing fantastically. I been watering it with hydrogen water and ozone water......
Sounds very interesting Ken. Perhaps in a future video, you could supplement it with a few diagrams, which would be very helpful. For example, how would you do this for single container pots? 👍🏻✨⚡️💡⚡️
The first thing my GF said was "why didn't he do a few diagrams to help us lesser mortals understand this a bit better"? As the saying goes "a picture paints a thousand words".
...yeah dude, why the single container pots?? hmmm??? 🤘🤣🤘
I also wanna know how to do the single container pots!
Yes, it might be good if he had a white board for occasional use. Not everyone can instantly translate someone else’s words into a mental image.
@@VANDERWALTTINA Naughty naughty!! 😵
Hi Ken. This is an interesting subject to me, as someone who has studied Paul Pantone's geet reactor and having just planted a garden that uses my travel trailers grey water... I want to know more about how I can implement one of these systems to keep my plants happy going into Phoenix summer time... they will probably also like my shade structure I just built. Thanks for this suggestion!
i found a study a while back where u can use magnets to soften ,charge water out of the hose or funnel into bucket.its 2 rows like equal sign and you place the hose in between .first pair at water entering ,top and bottom N/N ,S/S ,N/S, N/N, water exits my plants love it ,cool channel sir.
it seems logically there is one too many 'N' references here and one 'S' reference missing
The shape actually matters according to Biogeometry. Dr Ibrahim Karim has a very in depth study into the shapes and placement of those said items.
This information is great, but could really use some illustrations/diagrams. Anyone have any sources for further reading? Thanks!
I once had a broken housing on the UVC sterilizer in my hydroponic bubble cloner. At first I thought I was crazy as I could feel a tingling sensation when I ran my hands through the leaves of the cuttings. I learned to unplug it before touching anything but continued to use it because it made roots faster and healthier than anything else I'd ever used. Eventually I figured out the housing had been broken when I'd received it and replaced the unit. Never repeated the experiment for obvious safety reasons...lol...anyway....
So let met get this straight, you suspect the UVC was what was giving your plants that crazy growth?
@@ThatThing1675 not the UVC (that kills the bacteria in the water) - just the current in the water - the bulb shroud was broken and the bulb was exposed directly to the water (including the socket it was plugged into...)
Does the RG58 need to be wounded around the centre shaft all the way down past the reflector and thereby contact the reflector? Or is the RG58 only meant to contact and touch the driver part only without touching the reflector as it gets wound around the centre shaft?
I absolutely loved the TENS therapy on my back after it was injured! That hot, intense tingley feeling was amazing on my beat up hinges. I just about melt thinking back on it. Might have to look into getting one of the home units.
Had the same treatment for a ruptured L4 in the 80s. Was soothing!
But nowadays you realize you were scammed right? 😊💯
@@MychelleSeymourHeyyouremember Yes/no. The therapy was only somewhat helpful. I kept going back, because I was seeing the tech at the time. We found fun, new places to put the TENS electrodes.😛
@@ikonseesmrno7300 okay but seriously you realize you were scammed? If you didn't realize it.... I'm literally telling you right now you're being scammed. 😔 but it's okay because I forgive you.😘
How many for 30’x100’? So you strip of the shielding, expose the center conductor and wrap it around the receiver rod, then install the other end of the shielding beneath the roots of the plant. Where does the opposite ends of shielding or conductor go or do they just terminate? Shielding to ground on dirt end and conductor to yagi on sky end?
This technique combined with SonicBloom technology (useing a specific frequency to open the pores of leaves prior to watering/feeding) would be extremely interesting to test. Effective feeding/watering at both ends of a plant. Thanks for another great video.
i heard somewhere that bird songs do something like this
If you take a head of lettuce and chop off the top and leave the stem and stick it in a cup of water, leave it by the window for light of course, it will start growing again.!!
Which I was skeptical about, but after a while it will grow. Its amazing. Plants and nature are amazing. Since food is going to be an issue for all of us, who knows what other plants can work this way?
Food dependence equal freedom .
Question on grounding, with a large 40x120 area raised bed garden, do you still suggest 1 yagi per corner, and ground each separately below the root zone (at base of raised beds) or must the grounds be connected?
Could the ground/yagi mount be the same, say a driven copper pipe?
Good questions. I have a 1200 sq. ft. area (6' x 200') that want to plant 24 to 36 holly trees on. I'd like to know what the range is for one yagi antenna. His example of an 8' x 12' garden is basically a children's sandbox - not very useful.
Great video, thanks! With hydroponics this summer I'm going to run a simple grounded conductor into the tanks for both Kratky and NFT systems. If I drop the wire from a yagi into the grounded tank fluid, I guess it's electrically the same as tying directly to the ground line since the nutrient fluid is conductive. Is that right, or should the yagi line bypass the fluids altogether and just go to ground for an aerial-only effect on the plants? Or maybe lines from the grounded yagi running just under the plastic containers, but not immersed in the fluid, near the roots for both the flow or Kratky systems? Looks like some A/B testing this spring.
What a coincidence. I get to move into my property next week with a large garden, I have already stocked up on garden stakes and uncoated copper wire (well, 10m worth).
I guess I’m going to do it the fancy way because that is all I have seen.
And yes, I agree, the videos that I have watched are very vague.
Thank you ever so much for the explanation.
I did a magnet/seed experiment in 2019. Here in the Southern hemisphere the north pole of a magnet works best. I also found that exposing seeds to both north and south poles at the same time significantly stunts growth.
Thanks for the info
Have you tried only south pole and compared the results along with only north pole ?
Do you have a report i would love to see the results and scientific research
Ken
You really are a God send & this is one of the reason's I love your channel.
You make the most uniques video's & cut through all the bs out there & explain how things actually work.
I'll be watching this video many times as it was a bit to take in & you seemed to be talkig very qucikly, as if you had a train to catch or something.
Thank you soo much for all you do for humanity.
well arent you sweet!!!!!
Ken, positive waves 🌊😊👍. You post things about stuff I am currently curious about all the time! I hope this helps my Medical 🪴🪴🪴🪴🪴 . Your such an endlessly positive person. Secret Santa 🌝
Been watching your videos on electricities and magnets found some seed videos wondering if you can show us visual learners how to make a good electro culture system for at home gardening indoor & outdoor your videos make me feel smarter 😂
Electroculture is Trending!!!
we just started a new series of agricultural science test and videos coming out.
Ken I'd love to have you on for a proper explanation on this subject
You need Ken but Ken doesn't need you.
I'm guessing you're selling all your knowledge where as Ken gives it away for free.
Would simply grounding the four corners of an aluminum framed greenhouse have similar benefit for in-ground plants?
Thanks man, was busy researching this too. Your magnet videos 7 years ago are still the best. Would this make a difference to aeroponics tower systems I wonder. A internal spiral from bottom of the water reservoir out the top and above the tower. What do you think? Maybe a small difference since the roots and uptake is already much optimised, maybe it will help with pests and the leaves side of things?
It is in fact quite easy to show that all plants react to changes in the environment. They react to light, temperature and many other factors, for example rain. We can detect that by simply measuring the electrical currents that flow in their bodies. These are very similar to those we measure in human heart-, muscle- and braincells. This has been known since the discovery of electricity, but only today we can measure this easily, with off-the-shelf parts. I am continuing this research: ------ Intro-Understanding the electrical signals of Plants: ua-cam.com/video/drlYvZ8YCZE/v-deo.html ---- What plant signals look like: ua-cam.com/video/qdTxhaxjXxg/v-deo.html ---- How to build a simple Plant Voltage Recorder-Part 1: ua-cam.com/video/Cl2CVbAjqY4/v-deo.html
Good subject, but if you are still open minded enough, look at gei- engineers, and how they are contaminating our souls with aluminum,which ruins the ph.of the soil for ,plant uptake work.
Thank you. You might want to add spinning to increase the range of the device's effect perhaps by orders of magnitude. IOW, one braided coiled unit on a fan could cover acres and acres. To braid the copper, fold a length of copper in half and twist it with a drill. before coiling it on a wooden pole.
We all think Ken knows so much. But I know Ken has a big blind spot. Therefore I know his understanding is diminished by this.
I understand electroculture theory of putting a charge into the ground near your plants. It will affix nitrogen to the roots therefore no need to buy fertilizer. I have read the book by Christofleau which coined the term Electroculture, (title of the book) and studied how the device was made and used and how it captured magnetic energy from the Earth. I have read a lot about Viktor Schauberger and his agricultural practices. All of it fits together.
I also understand Yagi and radio antenna physics/electromagnetics. I have made my own Yagi from scratch.
So now Ken says that the thing Christofleau was doing can be replicated by a 2 meter 3 element Yagi??? Each antenna resonates with a certain wave length. The metal resonating produces micro volts and micro amperes of electricity in the coax. The Yagi Ken is holding is reactive to frequencies bear 144 - 148 mega hertz the 2 meter ham radio band. Really that is going to produce the 7 foot long oat stalks shown in Electroculture? Really Ken?!
You let us all know you pay your taxes. Someone as smart as you surely would know how to not be a citizen ie trustee the one who pays
in the trust triad. Surely such an intelligent human would not be supportive of the masonic ball. Surely a very intelligent astute observer would believe only what is provable, but no, not Ken. He firmly support a model with ZERO proof. All the time saying there is proof.
Any electric in the ground can help. But from what I've studied and then hearing him give directions which strangely always leave out the actual brass tacks of exactly how it's done.
No you guys didn't miss anything. He NEVER made it clear what you do with the center conductor. He kept repeating "it has to be grounded." So the outer braid or coax shieldiing must be grounded?? Yes he said that. But what about the center conductor?? No he didn't explain what to do with that. If you ground them both then there can be no charge differential hence no voltage or current even micro. Did he even bother to say Ground the outer braid to one location and the center conductor to a place 5 or 10 feet away? No he didn't say that.
That's why there are over 15 comments begging for an exact explanation, Because he didn't give one!
No. This guy is a Narrative spreader. He believes in theories that have remained without proof for 500 years.
He's just trying to short circuit your faith in Electroculture by substituting a weaker than water explanation of it which makes any effect so small you will give up on it and never see the real thing.
Yeah brother only those few left of us with eyes to sea, can spot these narrative spreaders, He didn't emphasize height and completely disregarded the IMPORTANCE of shape. I know there must be a way to get those giant fruits that are mentioned in the bible, but too much deliberate misinfo, makes for, in the best case great results, but still not exceptional. Same thing they've done with watering down each potential booming field like above unity and the likes.
Anyway coming back to your last paragraph, instead of grounding center and outer coax conductors in different places, wouldn't two copper pipes mounted at different places do the job. Or better yet, a tesla style bifiliar wounded wooden stick going 30ft high?
Question - What happens when I use those antennas in a plastic pot inside my house, soil in a pot is not grounded :(
Soil in the pot is your ground.
I fell for that concept as well. I wasted a lot of time and money by inserting a small stick, wrapped in plain copper wire with a nice vortex top, stuck in every single plant pot in my house, to include all the plants in plastic pots sitting outdoors. It did NOTHING! Plain dirt encased in a rubber pot is not grounded. The earth outside is grounded. Same thing applies to these claims that you can hook up an electroculture wire to some metal piece within your vehicle so you can be grounded when driving. Ridiculousness! The car sits on rubber tires so therefore there is no grounding conductivity between the earth and your vehicle.
thank you for simplifying electro-culture.
Super thrilled you have taken on this subject as I have been disappointed at all the confusion and lack of finished efficient design application on this subject.
Deuteronomy 28:40
You will have Olive Trees (the Tree of Life) throughout all your territory. This method of electroculture should keep the roots from freezing thus allowing us to grow Olive Trees everywhere. Thank you Ken!
Would there be any benefit to taking a Coaxial cable, stripping the shielding and putting it deep into the soil of a potted plant? Or do you need the antenna for it to work?
I just looked into building the Yagi antenna and it seems complicated
But I was looking at one someone made that can transmit 2.4 GHz WiFi
So maybe thats why, lol.
Would love a video on a really simple Yagi antenna build thats specifically for electroculture.
So I watched this again after educating myself a little more on Yagi antennas...
And I gotta admit man, you ain't bsing.
I see you're frustration with the electroculture antennas being made, they are super elaborate for no reason. The materials used in a couple of those spirals could setup a large area properly with a simple Yagi array.
I wonder if With little minerals in the soil. Plants have less magnetic connection to the Sun. I used to use electrolysis to make Gold water ,silver, iron ,water. And pour in the soil and mist the whole area. And all different powder minerals in the soil. Size of plants were normal to large. But the colors , taste ,smell and oils ext. We're absolutely next level. And when juicing or slicing there was a oil layer at the cut. The real oil of the plant. Everything at the store is dry. Wet lettuce that's actually dry. On essential oil no vitamins. No minerals. That's why we have to salt everything. Good Soil makes good Oil.
I wouldn't be so quick to discount the effect of the Pyramid geometry, there is another effect in place that occurs when using that shape. If you're not familiar with it there is a book called "The Pyramid how to build it how to use it" by Les Brown 1978, that is specifically on crop growth, he observed interesting Magnetic behaviors using the geometry that had these growth boosting effects on plants as well as preservation effects when the sides were properly oriented to magnetic N-S.
This also matches up with the research of Dan Davidson which you can read about in his book "Shape Power" where he focuses on the effects geometry has on the Aether, I believe the same principles are in effect when it comes to the Pyramid. And like you said this isn't some "new age" stuff, this is verified through experiment.
In both books the authors make note of phenomena that occur in the tips of the Pyramid, in Les Browns book he believed the Pyramid accumulates charge in the structure through its apex tip until it reaches capacity before it release it out the top and sides of a ratio of 80% to 20% before repeating, like a breathing cycle.
In Dan's book, he observed that a Positive charge formed at the tips while a Negative charge formed at the core at 1/3 height, likely because the Aether builds up charge at intersecting lines, I also have reason to suspect that because of this the Pyramid is the arch form needed to take advantage of the time variable in a magnetic field, such as the Earth's MF, to be able to extract electric power without a moving component.
Anyway, Les Brown had phenomenal growth and preservatory effects from using Pyramid geometry on plants and food, so there is something to using it for different effects. Brown built his out of wood, and Dan's research showed a stronger charge buildup in a metal frame compared to an insulating material, and both authors confirmed that the structure did not need to be closed, just the frame was enough for the effects to occur, and these experiments have since been recreated by others so the effect is verified.
I do wonder how the Dielectric Induction takes place in this case though, not to mention no contact with the roots.
I am dyeing to try this this Spring/Summer! I am currently trying the magnet seed sprouting method.
Good luck!
Thank you! So one interview i saw where he says just wind copper wire around the stick with a lodestone or quartz on top and wind the wire around that too - so could we use shungite on the top of the wooden stick? That's the only crystals I've got lying around the house!
This video made me realize that I need a new 2 meter antenna... And one for GRMS too.
Wonder if Ken would have any suggestions?
Are you explaining to us how to influence the roots to grow down? Can I offer you a better way to go about it? Water real deep! Possibly a drip system? I remember back in in a day the best Garden I ever had was when I had a drip system. 🤔
Thank you for talking about this but I think a lot of the copper stuff is just for beautifulness just for fun and it's a work of art for everybody to enjoy especially all the birds thank you so much for talking about electric culture
I have # 2 4 giage solid copper rg6 rg 11-.500 coax aluminum. Im guessing diameter is not that issue to generate the spark we want. Would it be more effective to run 4 rg11 leads up a tree or tower? My greenhouse is next to a 40 ft tree. My growing bed is 10’x3’x3’ dug out of ozark rock soil. The box is tarped below and filled with premium soil. Should i peirce the tarps with ground rods connect them to the coax also on that antenna do i connect the jack and stinger to 1 ground or to 2 seperate grounds?I have a mist irrigation system to keep the temp down in the greenhouse during hot days. I appreciate the video and any imput. I have to get in that tree today and trim a limb anyway.
No wu wu with u im glad i had limited success on electrical hack projects and didnt know about. That. Your knowledge has made my hobby so much more fun
I use a black square to receive local news. Facing aluminum foil at back of antenna works great. Curious how that relates. More importantly, how important is covering your crops?
I was just searching up some info on this topic and you just did a video on it. A real coincidence for a change lol. But anyway I always watch, you've taught me a lot. I've never subbed cause I usually watch without signing in so I just did. 👍 Thanks Ken
This is so cool I have been a serious Gardner for a long time in this past month started planting with electroculture in mind ... One question that would be cool to answer would be how much area would one yaggie array once grounded how much area would it affect
suddenly this subject came onto my radar - didn't see your video here on it, but glad you cleared things up and explained better
If you can't solder super glue and baking soda works awesome. It'll also repair holes in gas tanks:)
Please Excuse me if this is already answered. I’ve read conflicting information on running the ground wire through your garden. Obviously antenna north. But at that point I’ve heard running your wire west through the grow plot and eventually grounding south. VS running the wire clockwise (and eventually grounding south) in the northern hemisphere.
Yeah. Thx much .. good info.. Can you tell me why not Pyramids and certain structures? As you mentioned against them.. What real world experience you Hava? What about the book. "Sacred Stewardship" Charles Hubbard..
Hi Ken, thanks for another great video 👍
Could we possibly make a similar simple device to hook ourselves up to for health/healing benefits do you think?
If so and you could do another video that would be amazing 🙂.
Thank you for actually explaining this. I've been very interested in this topic but I really wanted to find the whys and the actual practical application. I appreciate how you cut through the crap. It's always an honor, privilege and pleasure to learn from you.
Thanks for covering this topic Ken. I noticed in the other comments, people asking about frequency. Would a harmonic of the schuman frequency be more / less effective? I guess I just proposed my own experiment. Lol!
If solder is not used than using ANTIOXIDANT or NOALOX for electrical connections will help reduce the degradation of dissimilar materials from corroding or rusting. It reduces the resistance from perpetual corrosion.
Thank you very much Ken!
How thick do you need the wire and where do you connect it to each element? Can the wire be braided wire? I've got a lot of thin braided copper wire (with plastic coating) lying around that I would love to use if possible.
Finally how far up should the antenna be mounted? I've seen electroculture suggest 20' in the air (now that I know what the antenna is - thank you!)
I really appreciate your videos. I had my kids do science projects on the magnetic seed experiments thanks to you.
It can't have a plastic outter, it needs to be just simple copper wire. Don't over think it, a 12 volt battery and small solar panel will work if you have a way to regulate the power into the loop
Just one question: does it need to be grounded??
Have you made and tested tower-busters made with metal shavings and resin? They call it orgonite. What is your thoughts? thanks
New Age quakery is in fact thousands of years old come back new to us.. Electroculture is est. mid 18th century. what does LCD stand for? crystals are powerful and can affect positive change with our plants.. try it and prove me wrong.
Hello, Ken;
Thank you for this video, I'd heard of this but I thought it was kinda' woo-woo.
But your explanation led me to some research that substantiates what you said, & more.
I want to make an electroculture antenna & I remembered your statement re: 'yagi' antennas.
So I searched for "homemade yagi antenna".
I found antennas, they are/can be tuned to the frequencies intended for reception.
So now I don't know what frequency my antenna should be tuned to.
Can you recommend a frequency or frequency range, please?
I think this is going to be extremely important in view of likely coming food shortages.
So if everybody will start growing some food now, using electroculture, it could really help.
Keep up the good work, too many have already capitulated to TPTB, & the MIC.
Have a GREAT day, Neighbor!
Thank you. It’s like u read my mind. I’ve been searching on this topic recently w little success.
Uncle Ken is the greatest damn wise uncle I’ve ever had.. and one helluva Whistler!!! This is the hot topic at the moment 👍🏻
Not only in the electroculture items for in the garden in various videos, I noticed that a lot of things that uses copper coils for growing & other things, even in the "woo-sphere", they all insist that the northern hemisphere items be wound clockwise & southern hemisphere items be wound widdershins (counter-clockwise). Yes, I prefer widdershins. I like the sound of the word. laughing...
In the northern hemisphere, bean, pea, & other vining plants always grow their tendrils counter-clockwise when they wind around a trellis or pole & the opposite is true in the southern hemisphere, they wind around clockwise. Same goes even for flushing the toilet in the two hemispheres.
My silly question is- If the natural direction goes one way, why in the world would people be saying to go the opposite direction when making copper coils for whatever it is that is supposed to flow "naturally" in one's hemisphere they currently reside in? It makes no sense.
Nope, I have not one scientific bone in my body, but I am great at growing a lot of our vegetables & the "alchemy" of canning & cooking. (big grin) One day I'll find the correct magnet & use your method for the seeds before planting. That was a great experiment & very well done. Thank you, I actually understood it. (smile)
What a joy to discover (just today) such a smart, informed and creative thinking fully human individual. Sincere thanks and encouragement to you sir!
You say you don't "have to" make the vortex. When you say vortex, I'm picturing these spirals I keep seeing. I've made your yagi design and I believe it's working really well but I feel like spiraling the wire, rather than the yagi design you have another video on, would require less work and materials, assuming it gets the job done the same. Any thoughts? Am.i missing something?
Thank you for explaining this important subject in simple terms and explaining that it doesn't have to be expensive. In a future video could you also talk about how and whether or not this cuts down on insect damage. Is it because of the plants being healthier to begin with or some other thing or does it affect bug damage to plants in any way. Thanks!
I've been interested in this for years but only have a loose understanding, I have an old TV antenna and a bunch of raised beds, can I run wires off the antenna to each pot? Also do I need plates buried in the soil? Please make another vid about this, but I get magnetic seed exposure. I need info about the other types of electroculture. Love your vids, thanks!
..nice ken, i just learned about electroculture last week...i then proceeded to empty out all the hobby shops and h depots n hdware stores that actually had any copper left...imo, lots of people are hearing about 30% less watering, less fertilizer, no pesticide, with more fruit and veggie yields ...im glad to hear that alum will work too...🌞 i for 1 will appreciate any and all of your present n future explanations of this method...
...and
...please look at the mfc videos too...due to the grand solar minimum i think most outdoor growing may need to come indoors with grow lghting...the gsm may bring darker days to our growing seasons...therefore solar panels wont be as effective...im experimenting with a few diy microbial fuel cells that i can help run the grow lights indoors...(earthberming our house/shelters would save us a lot of heating fuels as well)...
coax cables, and aluminum rods work fine too
I sleep on a copper wire that's ran out my window into ground when my hand or arm fall asleep at night I grab wire and feel blood rush back into my hand it feels crazy grounding the human body has major benefits 5yrs now I never wake up stiff sleep like a baby
Using copper garden tools instead of iron does wonders
A very interesting video. Does an electric fence disrupt the potential gain of an electro culture array yogi antenna?
Thanks
I used to have an electronic muscle stimulator, basically a tens unit but more like the one Bruce Lee used. It was great for recovery but it doesn't in anyway replace exercise. One could literally sit around with one all day for months and not build mass. Have to build mass the old fashioned way, then use the machine to help with the soreness and flexibility.
I have 30 ft of pole with a big boy TV antenna, I found in our barn. From the 90s. Can I use that and run a ground wire down and splitting more wires from that down into my flower pots? I'm doing raised beds. Nothing on the ground. Please help!
With your knowledge of this technology, Ken. Could we not wirelessly transmit and receive the energy between gardens and cities? Kinda like gold capped pyramids with mercury pools beneath them or those high antenna like shapes on old buildings seen searching Tartaria? 😳
I'm happy to see you speak on this! Thank you for what you do!
I did not know this but have built many antennas for different frequencies from radar to 10 meter receive/transmit systems. Very interesting