With this they WILL NOT ENTER your house Never Again - Brilliant Idea
Вставка
- Опубліковано 10 лют 2022
- With this they WILL NOT ENTER your house Never Again - Brilliant Idea
With a few 30mm irons and an electrode welder you can create a device that will help you a lot to secure your house. The system is very simple but efficient. I invite you to watch the video and discover this brilliant idea. - Навчання та стиль
Idea de cerradura que si podemos abrir de los lados, con combinación aquí: ua-cam.com/video/TCNl5No1nGU/v-deo.html
Es una traba común y corriente! Y además si salís y se te cierra la puerta el que no va a entrar nunca más sos vos!
Solo sirve si estás dentro de la casa
Por la ventana
L
انا لا افهم اللغة الإسبانية و لا احتاج منك ترجمة،و اخرج من هنا بسرعة.
It's only as strong as the screws used to install. Also a way to lock yourself out by "accident" . I lived in Barrow, Alaska where our doors had to be polar bear proof. Our door had heavy steel hangers holding a 4 x 6 beam and no heavy boot nor polar bear is coming in.
Plus don't the doors open outward in Alaska?
I saw exactly what you said immediately
@@Moondoggy1941 if the doors open outward, that could be a problem with a heavy snow.. worse than the 4x6 beam and now you're stuck inside!
So how do you get back into the house.
Rick you already had cred with me when you said you live in Barrow, Alaska. If you're up there and you're still alive, you know a thing or two about safety and survival.
Seems like the latch is significantly stronger than the wood frame.
I wonder how many of the 1.4m viewers actually made one, lol.
@@smfvmd All of them😄
"Seems like the latch is significantly stronger than the wood frame"
I agree. I was thinking that a steel door frame, steel door and a good dead bolt would be much more secure. A good boot would just pull it out of the wooden frame. Plus, it looks like it might be easy to lock yourself out.
Nice idea, but you may as well have used glue to put it together, as those welds are very weak. Just tapping the rod like that gets no penetration and will break off quite easily. Also, it needs to have a lock-off system, so that you can still get in when you come home.
trust me, the cheap wooden door frame or those weak ass drywall screws he used are gona give out long before those bad welds ever would
I'm not a welder but I've used a stick welder before and I've not seen that "tapping" technique before - perhaps just to tack something before actually welding.
The video is sped up. He's holding it on there longer than it seems in the video. I think his rods are just too much for the thickness of metal so he's using that technique to avoid overheating the metal. The end result would be much stronger than the screws holding it to the door frame.
@@Mikej1592 It looks like European doors and door frame that are metal. They build more solidly there. Electrical wiring is run and then cementedstuccoed over. If there's a problem, they chisel it out. I saw an addition being built using cinder block, brick, and big rocks(whatever was available). After the walls are up, they make it all nice with stucco. This was in the Czech Republic but in Italy I saw the frame of a house made of rebar and concrete rather than wood 2x4 and such. Interesting seeing the differences.
The "lock-off system", as demonstrated, is simply to leave the latch flipped up. The weakness in that system is that enough vibration, say, from a tractor-trailer rig going by down the street, could cause the latch to flip down, locking you out. The fix would be another catch that would hold the pivoting latch in the up position. Even a magnet on the door jamb might work.
I have one of these on my backyard gate, I bought it at the hardware store about 10 years ago for about $4. Looks like a pound of steel held on with a few flimsy screws.
I was just about to say that. Looks like my gate lock. Which you can buy at any hardware store.
I'm glad I clicked to the end of the video to see what this magnificent, world changing device was - a gate latch.
@@TheMadison625 la idea es poder hacerlo uno mismo 😊
@@silviaperalta2267 I don’t want to have to do it myself when I go buy one at the store and save myself a whole more time to do something more important.
Y como entras después de salir jajajajajajaja
Eso es lo de menos... Son detalles sin importancia.
Aquí lo que importa es hacer vídeos y ponerle idea genial o idea brillante
🤷♂️
Igual excelente idea
@@JOSEPH-xn2kk No poder entrar no es un detalle es una cagada
Encima está agarrado por unos tornillitos que en la primer patada vuela todo.
The idea is great, there are several issues with it: once you leave the house, you're locked out unless someone is inside the house, the mechanism is not conveniently located, I can see a huge headache or a pocked eye, last the door and the door frame are very weak you have two screws on the very edge of the door and the frame is thin, best option is security is a concern would be to mount the frame mechanism to the wall with bolts not screws, and the door mount a plate (double plate) one outside and one inside the door where the door mechanism would be attached to, very hard to break in this way. Like I said, the idea is brilliant, just a few work around. An idea just pocked, why not make the wall mechanism move left to right (sideways) that way you can move it out of the door latch and move it back in place when you're home.
Semper Fi
I like the way you think brother. The door / frame is the point of failure that must be reinforced. Semper Fi.
@@Crustymarine Indeed, I use "long throw" dead bolts ... and the (heavy duty) striker plate is installed with 4" screws that pass through the door frame and fully engage the wall studs that surround the door. These locks thwarted a burglar who was able to make a sustained effort to enter our home. (He eventually broke a smallish glass window -- but then discovered the deadbolts were keyed from the inside (as well as the outside), so he couldn't get out through the doors. (Note, many areas have made this "illegal" from a fire safety standpoint.) Thief did manage to get some camera gear and a few other items, but the logistics of the theft reduced his haul considerably. A family member arrived home while he was in progress, causing him to vacate (upon hearing the garage door opener). A determined thief can defeat most defenses, but the trick is to make YOUR home the least desirable to "attack" so that the thieves seek easier pickings elsewhere.
Obviously a stout door is also required. ...
@@petemasterson8852 Along with deadbolts I reinforce my door frames with a product that has been around a few years, Strikemaster Pro II, works great lasts a long time.
Keep it safe and secure Pete. Cheers!
Depends on construction code where you live, but often in US the door frame is one of the stoutest parts of the wall. Use 3" screws to get into the frame proper instead of just the trim and it's usually enough to hold against anything less than dedicated entry tools.
@Khaliil bin Ammar yeah that's a bit of a concern, you can angle it a little though and less problems. Could be done better for sure
Muy brillante idea. Gracias!!
La idea es brillante! Cada cual le buscará el lugar a usarlo y más arriba o más abajo, muchas gracias por compartir!
No, se puede expresar mejor la frase incompleta como el invento.: " con esto no entrarán a tu casa nunca más , inclusive vos mismo. "
Jajajaja. Lo mismo pensé.
X3
🤣🤣🤣🤣🤣
Deje le mando corazones ♥ 💕 ❤ 💖
Jajajajajajaja 🤣 🤣 🤣 🤣
ajajaja muy buena, igual de acuerdo a como lo puso , yo le pego una o dos patadas y esa puerta sale volando, ya me paso en csa que me cerraran y perdieron la llave y tuve que volar la puerta de una patada, asi que si es muy posible entrar
Muy buena idea lo malo es que al salir como va a entrar nesecita que alguien esté en casa siempre, y la otra es un mecanismo muy peligroso por el volumen que, si una persona entra sin cuidado corre el riesgo de perforarse la cabeza tendría que estar a una altura donde nadie corra peligro
2 metros, aproximadamente. Jajaja.
@@Jose-gz1ks Ud se adelanto, Yo pense lo mismo. Eso mecanismo es peligroso.
Pienso que debe aprender a soldar!
Es una cerradura segura, solo para cuando ya se va a dormir, y tendría que estar en la parte alta de la puerta, para que no represente peligro de que alguien se lastime. Saludos.
Debe poner letreros y luces de neon..
Eso esta muy bueno! Me gusta pensar que pasa cuando se te cierra y quedas fuera...
Exacto pensé lo mismo, salís las puerta se cierra por el viento y si no hay mas nadie .. a dormir arofue
Kudos for making both this lock and video. Although there are several drawbacks, you showed each step clearly as well as your instructions. If your device works for you and your needs, we’ll done. Everyone has something to say about something. I was a Police officer and used to go to neighborhood watch meetings. There are many ways to safeguard your house. One of my favorite sayings was that a nosy neighbor is great because they are often who will notice someone who isn’t supposed to be in your house. Keep doing what you enjoy, if you like doing videos. Good luck and have a happy safe life.
Por favor, lo importante es la idea de la automatización del cierre. Ahora abramos nuestra mente a la cratividad busquemos una aplicación, podemos usarla en estantes de nuestro taller que siempre estan abirtas las puertas y nos golpeamos en ellas.
Podemos realizar la idea mas pequeña y una terminacion acorde a su uso.
GRACIAS Sr. ELECTRODO POR INCENTIVARNOS A PENSAR
Felicitaciones desde CHILE
Está idea ya existe desde hace muchos años, se usa en accesos a ranchos para abrir y cerrar rápido y cómodamente
Un pasador, un pestillo o una aldabilla cumplen igual, son más estéticos y menos peligrosos.
Gracias por compartir su idea, quizá para uso agrícola o industrial sea más útil.
Nice. You should put a magnet to keep it in the open position so if you leave the house and slam the door, it does not lock you out. The magnet would hold it up but still be easy to lock when you are inside.
Excelente!!!🤙🏼💪🏼
Es muy sencillo prever que el aldabo caiga solo, añadir una pieza de magneto a la pieza que va fija al marco, de esa manera cada vez que se levante el aldabo se quede adjunto al mismo!!!!
Excelente idea, ya la realice con el magneto!!!! Subiré la foto.
Gracias por el consejo..
Muy buena idea, suma en lugar de sólo criticar como hacen algunos.
Se está complicando la cosa, si con el magneto lo dejas levantado, que seguridad ofrece el sistema para que no se abra?? ahora, con un sistema de enclavo/desnclavado a distancia, si le veo la utilidad
Pongo eso en la puerta de entrada y mi señora me echa de la casa... ¡ahí sí que no voy a poder entrar nunca más!
Ja, ja, ja, ja, ja!!!!
" claro si te portas mal"
Pero se libra de su mujer.
JAJAJA. Es verdad...
Muy bueno!!!
Genial! 👍
Excelente trabajo
Creo que un pasador cumple la misma función y es más sencillo, igual es un lindo trabajo
Excelente idea.
Excelente trabajo mr electrodo
Great device and idea. simple build but very strong. Thanks for the instruction. Keep in mind though, it's only as strong as the screws and wood holding it to the door, which is based on the strength of the frame itself. adding a longer piece of steel to the frame and securing with several screws would harden the frame then I think a larger mounting plate on the door itself with 8 screws would harden the door. You'd have to try it out and see how much force would it take to break the frame and go from there. Cheers!
But you can weld it to the door frame.. you need to use bamboo welding rod .
those "welds" would break with just a few kicks.
Muy buena idea, pero, no sería mejor que el tornillo que hace el trabajo de "seguro" sea de quitar y poner, así no tendría el riesgo de quedarme fuera.
Así es, se te olvida y te quedas fuera
@@manueltirado4130 :~ Lo mismo pensé y para evitar el riesgo de quedar por fuera se recomienda instalar esa chimbada en el exterior.🤣😅😂😠😅🤗😠👹👎
o que tenga un iman en la parte superior, así lo tiene en el imásn en posición de abierto y cuando deseas cerrar por dentro, lo desenbonas del imán y cae a la cerradura... hay varias formas de resolverlo, es buen diseño, pero tiene ese problema... saludos
Y la llave?? O es cárcel ?? Entonces va del otro lado.
Con esos tornillitos una patada y se abre
Bravo!! Well done. 👍
Gracias, muy buena su idea. Bendiciones desde Colombia.
@David sanz tabares la idea es buena, hay que complementarla esforcemonos un poquito.
Te felicito ☺️, por compartir esa idea ya que para algunos sólo están para desmeritar el trabajo de otros, se podría usar para un patio o para un reja . Después de realizado el trabajo se podría modificar o agregarle como un imán en la parte superior para evitar un cierre repentino. Mil gracias por tan excelente trabajo lo felicito. Saludos de Colombia
No mi amigo.si por tener seguridad ,no vas hacer algo que los único que corren riesgos son los que viven dentro de la casa.lastimarce o quedar afuera
@@sergiolovecchio281 espera el próximo vídeo y te enseña con entrar
Jajajajajajajajajsjajajajaj
Los tornillos que sujetan son fragiles pues con un buen empujon desde afuera sale de su sitio esta cerradura,talvez deberia colocar pernos pasantes ocultando las cabezas dentro del marco,por lo demas la idea es muy buena.Saludos a todos !!!
Pero si sales ya no entras. Una mier.da de artilugio.
@@luispomarec645 como entra En el próximo vídeo
Este mecanismo es más mejor para puertas de cercas o corrales ya que pues es más fácil abrirlas si está en el exterior
Outstanding work...👍
Excelente
Gracias por la idea, pero al salir como hace para ingresar a casa??
Gracias
Por la ventana!! Lógicamente! No has comprendido el invento o qué?🤷🏻♂️
Buena idea para 3 puntos en la frente,cabeza o arrancarte un ojo jaja...es chiste!! Esta buena la idea👍
Ésa pregunta y otras similares tienen saturado el canal.
Great idea!!! However, I don't believe the screws will hold up to a good door kick.
Neat. Thank you for the video.
Super.
Para todos los que comentan sobre el riesgo de quedarse afuera... en el título del video lo dice muy claro: "Con esto NO ENTRARÁN en tu casa NUNCA MÁS - Idea Brillante". - Respecto a lo brillante de la idea, supongo que ya depende de si tienes forma de acceder a la habitación por otro lado. Al menos se me hace buena idea para una puerta trasera para las casas donde se puede entrar al patio y llegar a la parte posterior (cosa que aprovechan los ladrones para intentar entrar sin ser vistos), se puede asegurar esa puerta así, y uno puede acceder al domicilio por la entrada principal, con un cerrojo normal. PERO, si es la única entrada... ahí sí que se cumpliría eso de que ya no entrarán en casa NUNCA MÁS (ni los dueños), hasta que le pongan una o varias buenas patadas a la puerta y salgan del marco esos 4 tornillos. Saludos!! P.D. Cómprense e instálense un buen cerrojo con llave. ;)
Para todo ay soluciones se puede poner un espárrago oculto y se abre pero en lugar de ese sierre un tranco
Se me ocurre un sistema de destranque electromagnético con control remoto
Exelente creatividad ,gracias por comoartir
😂🤣😂🤣😂
Excelente observación!
I can kick that door down in a split second, not good when you bolt it to the casing on the door. You're better off installing a U-joint on each side of the door with four bolts and running a metal rod so that the door cannot be kicked in.
He used weak screws so he can kick it in himself when it locks him out
I doubt you could in a “split second”. Stop exaggerating
gracias por la idea . ya solo nos resta acomodarlo a nuestra conveniencia , por mi parte lo instalaría mucho más arriba para evitar accidentes por golpes . gracias
Un pasador
Que idea brillante!
Muchas gracias excelente idea, Felicitaciones, por su creatividad,en seguridad y privacidad,desde Tulua Colombia le saludo.
Muy buena idea. Es evidente que solo se puede salir, pero a toda persona que le interesan estos temas se da cuenta de inmediato que hace falta algún ajuste. Se puede dejar un poco más corto y con las puntas redondeadas. Con respecto al cierre, se puede activar un iman como decia un amigo en un comentario anterior y se podría activar de diferentes formas, con la huella o con una targeta magnética, porqué no. Esta es la parte mecánica, lo demás lo pone cada uno. Muchas gracias por el aporte. Saludos desde Chile.
JPP
Just a tip from a retired toolmaker from Australia always preplan and drill as many holes first before cutting to smaller sections. This way you can hold one single uncut length by hand . Cheers I do this now on all projects . Cheers
Buen seguro para al acostarnos por la noche... Podría ser en una puerta laminada, yo tengo uno parecido y por la noche dormimos seguros. Gracias, buena idea y gran trabajo. Gracias 😊
Great idea, but you're going to need a different mounting method because anyone who can bust a door open isn't going to need to put in very much extra effort to get through the door despite those 4 to 8 approximately 1-inch wood screws mounted in some soft door jam or trim wood, now on the other hand if you mounted your latch on a heavy-duty Steel door which was mounted in a Steel door Frame which was very well anchored in a structure, and then welded your latch in place,
well then you'd have something effective.
Not too effective. How do you get back in after putting the cat out. I'll ask Fred Flintstone.
That doesn't even make sense to me, eh whatever 🙄
Pretty nifty! Cheap and pretty simple (if you have a welder). I'd put 3" screws on the frame side and as long screws as possible on the door side without going through. I'd want to put a latch ON the latch to keep it UP when I'm on the OUTSIDE! LOL What happens when you're outside and the latch falls down!? NO KEY FOR THAT!!
put a strong magnet above to hold it up when not in use.
I can buy a latch like that at Home Depot for a lot cheaper than buying a welder
Super duper 💐
Que tipo de electrodo utilizaste para soldar ese material grueso?? Saludos
The mechanism is great, and it’s very solid. It needs to be welded better, with better finishing work, but overall really cool. The only problem is that the weak point is now the mounting. The screws!! One hard kick would rip the screws out of the wood.
Lo que pasa es que si usted sale como entra tendria que hacerle una forma de abrir por fuera o quitar el tornillo cuando salha
These are widely available in the UK, in galvanised steel, as self-locking gate latches
In the US too.
Cool,I always use 3 1/2 inch screws when working on doors when possible.
But this rules.....
Thanks for the video.
Aparte de lo facil para hacerlo en casa, se destaca lo decorativo 🤔😱.
El creador merece respeto por su trabajo.
... bien decorativo ....y puede reconfigurar tus ropas.
Cómo hará para entrar?
Jejejejejejej
@@wilarguello1598 Y los raspones en panza o espalda
Una sugerencia que te puedo dar para tu próximo video es un sistema que vi cuando yo era adolescente, cuca acaba de un tornillo sin fin soldado a la parte de atrás de la puerta o sea hacia adentro de la casa con unas tuercas y pero no de las comunes sino que estás eran exageradamente largas, en una de las puntas del tornillo sin fin había una especie de engranajes y unas varillas del 8 o del 10 el cual al girar una manivela hacía que estás varillas subirán o bajaran trabando la puerta
Muy buen.amigo .yo suy un pilipino.
MUUUYYY bueno !!TENDRÍAN QUE ADVERTIRQUE IBAN A SOLDAR EN VIVO ME DEJARON OBNUVILADA POR EL RESPLANDOR.!!!MÁS RESPETO...
Hola!!! Ya Hay en ferreterías un artefacto a la venta..... Se llama Cerrojo de Seguridad...👍👍👍
🤣🤣🤣
Esos tornillos o la madera, aguantan como 400 lbs de empuje, y la cerradura va a sobrevivir, pero ni el marco de madera, ni la puerta, van a poder enfrentar a un intruso decidido.
nice! You made something you can buy at a store, good for you.
Super
When you weld, why don't you just strike an arc and lay down a bead instead of welding with a series of tack welds? By the way, one good kick and your cheap screws will pull right out of the wood trim they are screwed into.
I'm thinking maybe they have to do it that way in all these videos because the welder isn't strong enough or their power can't supply enough current to maintain welding a bead. But, who knows
@@rickyhall7514 That is not likely the case. I believe it is because so many of the people doing the welding don't have the skill to strike an arc and run a clean bead. These are not strong welds that they are making.
@@ROKuberski Interesting perspective you have. What I know is, I used to run a mig welder, but when I first bought it I lived in a house with poor wiring. Even the shop had poor wiring and I couldn't maintain an arc for more than about 5 seconds before blowing fuses. Also, maybe, with SO many comments about the poor technique, maybe they're pushing it now in their videos simply for the greater comments. Thereby leading to more traction for views, but I know it's a stretch, it's just what a lot of other channels do often.
Soldado En una puerta trasera de acero con marcó, también, de acero la veo muy bien.
Pero en madera la veo muy frágil a una fuerte patada.
Eso mismo creo una patada y los tornillos revientan
Very clever. 🤙🤙
I like this idea for a back patio door.
Hay un fallo gordo y evidente, tipico de estos sistemas: los anclajes!
El sistema lo aguantará todo, pero al estar anclado a la madera y con una base muy pequeña, esta se astillará y se romperá. El sistema sobrevivirá a la destrucción de puerta y/o marco y el ladrón podrá llevarselo para montarlo en su puerta!
Aún así, la idea es buena y está muy bien realizada. 👏👏👏
Y si sales y por accidente se cae?? Quedo afuera!! 😊
Hola muy bueno me gustó pero como abrimos por fuera habrá un sistema ?
MUY INGENIOSA, SIEMPRE Y CUANDO ESTES DEL LADO DE ADENTRO DE LA CASA, PORQUE EN CASO CONTRARIO, JAMAS VOLVERAS A ENTRAR, A NO SER QUE DERRIBES LA PUERTA -
Pues me saldría muy caro si no tengo la herramienta para hacerlo o si se cierra cuando salgo, mejor me compro un pasador con llave que sale como en $250
El sistema está bárbaro, pero si depende de 4 tornillitos, vas a a encontrar la casa vacía y el sistema infalible en el piso. Debería ir soldado en una puerta de metal, ahí si.
No creo que lo encuentre en el piso si el ladrón usa una sierra en canto libre, o caladora, o tal vez un serrucho de mano, simplemente corta la puerta y empuja lo que no esté unido a la cerradura; sin complicaciones.
Yo pienso lo mismo!
Y si el ratero es buen trabajador asta el mecanismo se lleva para reunir el kilo y venderlo también.pero como q es bueno para una jaula Ai si se ve q es muy seguro
Con una o dos patadas violentas a la puerta vuelan los 8 tornillos... El sistema, si bien mas elaborado, no deja de tener la misma fragilidad de un pequeño pasador..... Si la idea es que la puerta quede fácilmente trabada....bien; si la idea es proteger la vivienda de una intrusión....no !!!!
Siéntase ud. Bien, a echo algo, se ha movido. Criticar es fácil, yo aún no me levanto de esta silla, soy boludo, ud es un ejemplo de esfuerzo.
Viva usted!!!!
Hi, Mr. E. Fun little project, but would not stop someone from getting in. The part you screwed onto the door trim needs to be L-shaped and the screws need to be 4-inch steel deck screws going into the door frame. Tack welds will not hold. Lay a true weld along both sides of the metal seam. Thanks for sharing! Stay Healthy!
y si el viento azota la puerta???
Buena idea, pero salis un rato afuera y si se cierra por vos, vas tener que dañar la puerta. Pero en general gracias por el aporte
Es lo que deduci
@@williamvaras5987 lo q deduje!!
Geniallllll. Y tendrás algo así para cuando uno salga? Q de alguna forma puedas accionar para abrir? Te felicito. Suscrita
Me va a dar gusto cuando tenga que entrar 😄
Para una casa no lo veo, te quedas fuera a la primera de cambio. Por la solidez que tiene creo que podría ser útil por ejemplo para evitar que se cierren grandes puertas de fincas, talleres o naves que hayan de mantenerse abiertas durante el día.
Imagine este "trambolho ", onde foi instalado provavelmente vai machucar 99% de quem passar nesta porta ,pelas saliências pontiagudas da peça.Não é uma boa solução!
That's adorable.
Es tan bueno este sistema que tiene un riesgo de caerse la cerradura y quedar por fuera. Falta algo para en caso de salir no se caiga la traba...los felicito!!!!
Muy buena y sencilla idea !. Me permito sugerir, el agregado de Relay o también Electroimán ( posición a decidir ), para su Apertura exterior ( o remota ). Saludos.
Esencial para no quedarte encerrado fuera de tu casa después de haber instalado esto y cerrado la puerta desde afuera😆
Any good ideas for windows. How do you keep that latch from locking when you leave so you can get back in?
Realmente descubrio el agua tibia despues de un aguacero , ese sistema pero de fabrica con mas esterica lo vende en los herrajes de ferreteria en Homedepot para las puertas de jardin y las de los parios con solo unos pocos dolares los compra y no son agresivos.
The design and theory is a few hundred years old but fabricating this kinda stuff is what makes it fun. Of course like others I see in the comments, there are a few downfalls and future “fails” waiting to happen with it but I also really enjoy the stuff that comes up in the comments. Thanks
Llegué a este video por casualidad,me parece muy útil...
Veo los comentarios y montón de críticas absurdas...
Que si los tornillos,que si se puede mejorar.... nos están dando una idea adaptable a la situación de cada quien....lo que si es un hecho es que tiene 430 mil visitas y 7000 likes.
El mundo está lleno de desagradecidos que solo miran su propio culo y no son capaces ni de dar a un botón por el bien de otro!
Y ni conozco el canal,pero solo por el trabajo de hacerlo,editarlo,subirlo y ver la carencia de empatía de muchos,me suscribo....
Ya tenemos quien nos cubra de mierda.... tratemos de empatizar.
Y si sales fuera y se te cae el pestillo, como lo habres???
Empiezo por sacarle la ""h""
Most of you missed the important part. He spent a half hour maybe making this. Same for the video. Then after posting it here, he has almost 1.4 million views which means he has made a great profit off this homemade gate latch.
Genial! Mas, se eu sair e o vento bater a porta, como eu faço para entrar?
Excelente diseño es muy ingenioso pero en cuanto a como esta sujetada la cerradura lo veo muy fragil, todos sabemos que esos tornillos son muy fragiles y delgados ademas estan atornillados en madera por lo cual con solo 2 patadas se esgarrara la madera o partira los tornillos por lo cual deveria tener muchos mas tornillos o buscar la manera de sujetarlo de otro forma
Muy buen trabajo de soldadura,y si se ve segura tanto que como tengas que entrar tendrás que romper la puerta 😂
@@antonio4463negativo mira bien los tornillos que utilizó para agarrar la cerradura a la puerta son super delgados y fragiles con 2 patadas que le den a la puerta se arrancara la cerradura de la puerta
@@alexomarpr4463 TIENES RAZON A MI ME HA TOCADO REPARAR PUERTAS CON CERRADURAS PARECIDAS A ESTA Y EN EFECTO LAS TUMBARON O SEA LA PUERTA A PATADAS Y CEDIERON LOS TORNILLOS PERO EN FIN ES BUENA IDEA A MEDIAS ..
@@juanmedina9690 exacto
Buena idea pero si sales de casa y sierras la puerta después cómo entras???
Dejando abierta la puerta del garaje.
@@jairofraile7354 😂😂😂
Great idea. However the screws are the weak spot. They are too shallow. They are too close to the edge of the jamb. The wood that it is being attached to is the wood trim which is not that thick or strong. There are double studs at each side of the jamb. Plus the attachment to the door is also weak - too close to the edge. If the door is a solid core door, you could attach it a little further back. I saw a comment that stated to throw a 2x member in brackets on each side of the jambs. That is my suggestion.
Es muy buen sistema, tan bueno que no podrás ni entrar tu mismo
Who would you call to be let back inside if the door closed and locked behind you? What does "The Lock-picking Lawyer" say about this?
Si cerras x accidente estando del lado de afuera ¿Qué pasa?
Obvio. Se queda afuera renegando de su puto invento y pensando:~ "" En qué fallé "".
@@jairofraile7354 JAJAJAJAJAJAJJAJA
Great work. Always nice to fabricate. Not sure how Id rate the bolt but it should hold up.
As an alternate a nice 8" slide bolt as thick as that bolt you use is about 10 Bucks, including the 3" screws Id run into the door frame
LIKE.. COMMENTED and Subbed
And u never come in again... genious
Lo malo sería salir y cerrar la puerta y al volver no poder entrar si uno se olvida levantar el seguro.......linda idea pero peligrosa para el dueño de casa
Además de poder perder un ojo si te lo tropiezas !!!!
Great idea all except what keeps the latch from falling and locking you out of your own house?😉
Perfect, right at tripping eye level. Neat build for practice, but that's going on a my fence gate.