as a general rule, the distance of your rod away from your work, should be about the thickness of your rod.....and also, a 4 1/2" grinder with a wire wheel, is easer and quicker than that slag hammer......great project, I think I'll build one for my Silverado....thanks
Your friend needs to change the settings then, cause it’s surprising how strong the welds are from this thing. Check out our smart car build, the entire thing has been built with this welder and not a single weld has broken yet.
Run 6010 finish with 7018. I just bought a 4'x8' 3/16" metal plate for 100 bucks. Designed my own. 32 hrs well get it done. Solid and one of kind 💪🏽💯 still have enough material for rear bumper. too.
+rusty2029 it did work 😂 its Josh's daily when the duramax wasn't on the road for the winter... you know, cause a fwd car is better in snow than a 4x4 duramax. Lol
+Fitzers Games oh ya, not sure how practical they are unless you have a large family or if you are a taxi :P Would be amazing if they made a 6 door first gen cummins.
+Dr. Mark in Texas Thanks! And we don't have a winch on the truck. Our logic is, if it gets stuck on the farm we have tractors to pull it out. And it doesn't see mud other than on the farm.
+Strong independent Black women Not sure if exhaust is in the current plans.... it is the rustiest part of the truck, so maybe eventually it will change.
+Muhammad Ahmed Malik Not sure if this is the look that we are going for with the Ford and dodge. Although mike was thinking of a new bumper for the back of the Ford. We will see what happens :)
+Michael D Well, it's not one that you can buy, it was custom built from a friend. But there is a website that sells similar shackles called "bigasshitches.com"
+Jay Payne Not sure if it made it in the final cut of the video, but we had to modify the holes to fit the lights. We welded in a plate to make the hole smaller. We couldn't find lights that fit the stock holes either.
+Grant Sarver Our bias will be towards the ones we have experience with. We only have experience with MOVE, and we have no complaints about it at all. But I'm sure that most other similar bumpers will have the same experience, it all comes down to personal preference.
Yo!!! 👍👍looks amazing. Awesome job bros. lookin real custom. Great edit. Checkout ahp welder. 120/210 stick welder 200$. It's radical. Lunchbox welder. It'll look good in ur shop an works eeeasy . Super video guys. Top youtubers for sure
+Bobby Roberts We all have full time jobs. For the shorty duramax, all led light products have been generously sponsored by Auxbeam, and the bumpers have been sponsored by MOVE bumpers. As well as josh (the owner of the truck) has connections for cheaper GM parts.
+reizer01 They are quality bumpers, we have no complaints. It's just a lot of welding... but it's good practice and saves yourself some cash at the same time.
+Hobby Machine It sure can, we do our best to aim away, and even cover the vehicles with cardboard if we are working really close. Our safety precautions rarely seem to end up on camera.
Can’t please everyone... finding royalty free music isn’t easy, but we do our best to choose content that the majority of our audience will enjoy or at least tolerate.
as a general rule, the distance of your rod away from your work, should be about the thickness of your rod.....and also, a 4 1/2" grinder with a wire wheel, is easer and quicker than that slag hammer......great project, I think I'll build one for my Silverado....thanks
#BUILT NOT BOUGHT!!!!!!!!! These guys are hard working. They made these trucks to what they are NOT SOMEONE ELSE!!! Great job boys!!!! #dank!!! Lol
+hogie1685 #dank 😂👍🏼 Thanks, and thanks for the help on this one, the welds didn't fall off this time 😋
A pos Harbor freight welder 😂😂 I bet the bumper fell off down the street
... it’s basically a toaster. But it does the job for cheap, and it hasn’t let us down yet!
Shifted Interests Does it actually work? I had a friend and he would use it and everything would immediately break off
Your friend needs to change the settings then, cause it’s surprising how strong the welds are from this thing. Check out our smart car build, the entire thing has been built with this welder and not a single weld has broken yet.
That truck has came such a long way. Started off a regular looking duramax with wore out tires and now just looks amazing
+austin meyer Thanks! We completely agree and we have had a blast sharing the journey with everyone :)
Your buddy in the red jackets a damn trip!
Did not know you guys are doing it nice
I love the bumper! I'd wanna put off road bumpers on my truck eventually!
+JW Montoya Thanks! And ya, they have been great so far, highly recommend them.
Haha nice ending. Fantastic bumper. Keep it up guys.
+raged cescent Thanks 👍🏼 :)
Another awesome bumper build man!!!
+Justin Childress Thanks! :)
Clean truck nice job on the build.
truck is looking great keep those vids rolling.
also great job on the videos.
+skeeter 250 Thanks! :)
Looks great! very inspirational keep up the good work guys.
+talesofthegun Thanks :)
love the video keep up the amazing work
+Mr. Mat1 Thanks! :)
the ending tho hahaha i always get a laugh watching your vids
+skulledmonte84 Thanks! :) glad you enjoy it
nice bumper build dudes
+skulledmonte84 Thanks dude :)
Looks good!
+ThinRedLine 013 Thanks :)
Run 6010 finish with 7018. I just bought a 4'x8' 3/16" metal plate for 100 bucks. Designed my own. 32 hrs well get it done. Solid and one of kind 💪🏽💯 still have enough material for rear bumper. too.
Looks really good
+Jerry Thanks :)
Dope might just do that with mine
+Primalspeed 3 oh ya! It's awesome
great heart
great team
I like wire feed better myself. I get down with it.
Where you get that boat hook in hitch
I love how you have this nice truck but when it comes to hauling stuff off to paint you use the Pontiac... The LONG bed Pontiac lol
+rusty2029 it did work 😂 its Josh's daily when the duramax wasn't on the road for the winter... you know, cause a fwd car is better in snow than a 4x4 duramax. Lol
glad to see you guys are working on improving your welds. Is that stainless steel he is welding on at 6:47 cause it doesn't look like mild steel.
i think i have a crush on that thing
+Sir Domino ... that's awkward 😂
Oh spotted the double dodge!
+Taylor Sowle The double dodge?? Lol
The drop hook
You should get front quarter panels that poke out like the ram runner now
+Fitzers Games that would be interesting... it could be called the "shorty dura-runner" lol
Diesel brothers are an inspiration to us.
Me too I like the 6 door dodges they make
+Fitzers Games oh ya, not sure how practical they are unless you have a large family or if you are a taxi :P
Would be amazing if they made a 6 door first gen cummins.
How much did it cost you in shipping to get one of these into Ontario? I want one but I have a feeling the shipping is going to kill the idea.
yup my buddies saw you there.
+Tyler Cumin Nice!!
Nice Job. First video of yours I've seen. What kind of winch are you using and how is it mounted?
Thanks
+Dr. Mark in Texas Thanks! And we don't have a winch on the truck. Our logic is, if it gets stuck on the farm we have tractors to pull it out. And it doesn't see mud other than on the farm.
Axle dump exhaust next?🤔🤔
+Strong independent Black women Not sure if exhaust is in the current plans.... it is the rustiest part of the truck, so maybe eventually it will change.
were you guys in Brantford last night?
+Tyler Cumin Josh was, he met up with a truck from sema
you guys should paint the rear shackel red
+Craig Burgeson It was originally supposed to be, but it got put on the wrong power coat line. Maybe once it gets chopped up we will change it to red.
You guys should make the truck wider
+Braden Tvorov It would be nice
Sweeeeeeeeet truck
+sawyer tabit Thanks :)
I drive an Audi but my dad has a 2015 duramax. Yours is way cooler than his 😂
+sawyer tabit Sweet! What kind of Audi?
We are into trucks, but we we are also into cars (we just don't have many car videos yet)
Oh gotcha. It's a 2009 A4 Quattro . Not the fastest, but not the slowest either. Has a great sound system :)
+sawyer tabit That's pretty awesome! Sound systems are sweet 👌🏻 we might get into it a bit in the future.
Were did you get that big rear shackle?
+OBS Powerstroke Courtesy of Hogie1685, we borrowed it for the shot.
Please bring back the kabota ranger 😃
+Beth Murrell It's coming back first chance we get. But it's still at the body shop... no ETA yet.
Thus truck is so fucking sexy. Awesome doesn't even describe it
👍🏼👍🏼
Nice put bumper like these on ford and dodge
+Muhammad Ahmed Malik Not sure if this is the look that we are going for with the Ford and dodge. Although mike was thinking of a new bumper for the back of the Ford. We will see what happens :)
where can I get that awesome D Shackle that you have in your hitch?
+Michael D Well, it's not one that you can buy, it was custom built from a friend. But there is a website that sells similar shackles called "bigasshitches.com"
do u guys not have better welders?
+Willy friesen Nope... that's about all we have access too. But we still get the job done with what we have :)
Shifted Interests - Chris Boot where'd u get your headache rack from
+davonathan pillar Josh got it from the dealership I think. The parts department gave him a deal that he couldn't walk away from.
what brand are those flush mount pods? And what are the measurements? I am having trouble finding pods that will fit my move bumper
+Jay Payne Not sure if it made it in the final cut of the video, but we had to modify the holes to fit the lights. We welded in a plate to make the hole smaller. We couldn't find lights that fit the stock holes either.
what tires do you have? 35s but whata the tire
+sean sheridan Josh can give more detail. But they are dickcepec (i forget if they are mud / all terrain, etc.)
well it's just we got a welding business and wood business
which part of ontario ya from im south east
+cody mountenay We are from "south western" Ontario.
U can't weld from inside to hide welds?
+J boogy Carrillo Its possible. but we wanted to weld both sides for strength and to fill any gaps between panels.
gotcha looks nice makes me want one.
+J boogy Carrillo oh ya, it's a sweet bumper. Functional too, we highly recommend it.
Can u give me the name of the company where u bought the bumper? Because I really liked it if u don’t mind.
The company is Move bumpers.
Www.movebumpers.com
y'all should make a little rolling cart for your welder so you don't have to drag it across the floor.
+Derek Windmeyer we have one..... but no one seems to use it 😂
I'm 15 years old and am looking at a lot of similar bumpers. Any suggestions or preferences?
+Grant Sarver Our bias will be towards the ones we have experience with. We only have experience with MOVE, and we have no complaints about it at all. But I'm sure that most other similar bumpers will have the same experience, it all comes down to personal preference.
Shifted Interests - Chris Boot thank you! Enjoy watching the channel. Keep up the great work!
+Grant Sarver Thanks! More stuff in the works :)
Yo!!! 👍👍looks amazing. Awesome job bros. lookin real custom. Great edit. Checkout ahp welder. 120/210 stick welder 200$. It's radical. Lunchbox welder. It'll look good in ur shop an works eeeasy . Super video guys. Top youtubers for sure
+Jeff Kleemeyer Thanks :) we will take a look, sounds almost too good to be true! Lol
How much did the bumper cost?
This was a sponsorship. But they have very reasonably priced bumpers, price varies based on options you want. Check out movebumpers.com to get a quote
Where do y'all get the money for this
+Bobby Roberts We all have full time jobs. For the shorty duramax, all led light products have been generously sponsored by Auxbeam, and the bumpers have been sponsored by MOVE bumpers. As well as josh (the owner of the truck) has connections for cheaper GM parts.
are you gong to get diffrent rims
+Matt Matson Not sure yet. But they would make the truck look mean if we did.
yes it really would love the vids keep up all the good work
+Matt Matson Thanks :)
any time could you give me a shout out on your next vid :)
+Matt Matson We don't do shoutouts like that, sorry.
What did both bumpers cost?
+reizer01 Both videos were sponsored by MOVE, all it cost us was our time, welding materials & paint.
Ah nice, I've thought bout getting a set of their bumpers for my truck
+reizer01 They are quality bumpers, we have no complaints. It's just a lot of welding... but it's good practice and saves yourself some cash at the same time.
Oh I'm not worried about the welding part lol
+reizer01 Good, cause there's a lot of welding to do 😂
Josh do you own the Chanel
+Phantom 103 The channel is run by Chris
Be careful grinding near the trucks it can do a lot of damage to paint and glass
+Hobby Machine It sure can, we do our best to aim away, and even cover the vehicles with cardboard if we are working really close. Our safety precautions rarely seem to end up on camera.
I build a replica of all you trucks out of 1/64 scale trucks
+Phantom 103 That's pretty awesome!!
Stick welding pisses me off. I have trimmers and it fucking sticks every time😂
Paint the hook red
+Sem Verpaalen You mean the shackle on the back?
Shifted Interests - Chris Boot ya
+Sem Verpaalen We originally planned to, but it ended up on the wrong powder coat line. We might re paint it after it gets scratched a bit
Line x
Get spacers your rims are to far in
+Hunter Yaeger Had some lined up, but the guy backed out. Still looking
smh @Canadians lol bring it down to the states and we'll weld it up for you and even paint it lol.
+Mike N. We were even using the highest quality American welder we could find... the harbor freight special 😂
I was interested in the video but man that music is got to go
Can’t please everyone... finding royalty free music isn’t easy, but we do our best to choose content that the majority of our audience will enjoy or at least tolerate.