Nice design and easy build. This helps the pup make her climb. I used 1X6 for the stringers and 1X8 cut to the width I needed for the steps. I laid out my dimensions on a piece of cardboard and cut it out to use as a template for the angles on the stringers. Subscribed, Thanks!
You made my day. I thought video would show me how to build ramp like building Lincoln Logs, instead made me feel bad and regretful for not paying attention in wood shop when I was in middle school back in 1983.
Nice video, for all those people complaining about dimensions keep in mind different people have different height beds, and furniture not to mention different things animals. Also to the people who think you need all the expensive equipment all you need is some type of a saw. It could even be a handsaw or a jigsaw or circular saw.
thank you for this video. i want to make some steps for my German Shepherd to help him get on and off the bed and in and out of the car. Hes getting old and is having a harder time.
Now if I just had a step by step explanation instead of acoustic music that would be great. I’m quite handy with basic instruction but the drawing out on the table lost me.
I mean I’m looking for instructions detailed! Not a high speed video of you doing it without explaining. ????why would anyone want to watch this? Just to pass time?
Half glass empty much, Tony. If your gonna bitch because your poor, that is a lousy excuse, you probably got a whole backyard there, use that! If not, then clean your shit up from inside the house/apartment. It's not that hard. Don't shy away from doing a little hard labour either, just use a saw if you have one, if not, then stop being a troll. No one likes bitchy people, if you have a better way of doing something, then do that. You don't need to be exaggerating about how unfair everything is. Be creative about it. You didn't even consider any other suggestions before typing that comment, so you are the joke. 🙁
@@ellisabell7944 The joke is the entire video. It did NOT show anything instructional. Just fast movements without give an inkling as to WTH he was doing.
Why? You made numerous cuts you didn't need to make because you chose to use your plank in a different orientation. Wasteful on materials and time consuming, when you could have achieved a better design, quicker.
![Pet stairs [Super Easy]](http://i.ytimg.com/vi/f6iK5jri2xA/mqdefault.jpg)
sure would be nice if you also included measurements as well.
Nice design and easy build. This helps the pup make her climb. I used 1X6 for the stringers and 1X8 cut to the width I needed for the steps. I laid out my dimensions on a piece of cardboard and cut it out to use as a template for the angles on the stringers. Subscribed, Thanks!
You made my day. I thought video would show me how to build ramp like building Lincoln Logs, instead made me feel bad and regretful for not paying attention in wood shop when I was in middle school back in 1983.
Man I love to watch someone who knows what they are doing!🇨🇦
Nice video, for all those people complaining about dimensions keep in mind different people have different height beds, and furniture not to mention different things animals. Also to the people who think you need all the expensive equipment all you need is some type of a saw. It could even be a handsaw or a jigsaw or circular saw.
Amen!
I just built it today. Great design! Thank you!
What did you use for measurements and angles for the cuts?
The fastest DIY video in the history of all time! Did nothing me make me want to go to pet co and buy.one myself....
Very good. I like the idea of the two supports for the stairs. 👌🏾
Thank you
Wait...how? All I saw was measuring and cutting, and then it was made! Amazing.
Great video! I’m new to woodworking and now I’m gonna make this a project. Thanks!
Perfect! Just what I need to make for a present for my sister. Thanks for sharing!
I thought these stairs were for dogs...
Some measurements and cut angles would be nice. Nice design, but I would put a little more bracing on the legs.
Very nice design. Thanks for sharing.
The short length of the video thumbnail somehow convinced me this was going to be as easy as LEGO’s
Covina Jaliscomex1050 lmao me too😩😩😩
Lost me with that obscure, geometrical drawing in the opening lol
🤣swear lol once I saw all the tools he was using I knew I was screwed
Breanna Pairrett yea just throw the towel in then lol.
This comment thread is hilarious and so true 😂 but let's not give up and waste 30$, we can do it!
WOW! Like it really much! Wish i had the equipment..!
Great build! I need to make something like this but for a raised full size bed. Any dimensions to reference?
Hello would it be possible to get the measurements that you used I'd like to build it thank you very much
Now if i can see that in slo-mo i might just be able to do this.
I know. I was like, "Slow down Goddamn it!!!" Then I realized I could change the speed on my UA-cam settings.
Yo good disign my dof loves it
Nice Job....
where can I find the plans for this build?
Some talking & explaining what you're doing would be helpful for us beginners.....
It's nothing complicated mate:)
I subbed 20 into this video. 👍
nice saw
Hello they look very nice would you happen to have the measurements by any chance I would like to make a set thank you
No it was improvised sorry..
Dogs are cute
so are dogs
@@CovinaJaliscomex ummm he said dogs
slow down no mention of angles or length?
thank you for this video. i want to make some steps for my German Shepherd to help him get on and off the bed and in and out of the car. Hes getting old and is having a harder time.
Wow
Well as a novice wo $30,000.00 tools & a way to understand all the marks & cuts all I can say is... nice job
Lost as ball high weeds
I would love to have the directions and measurements as well in the discription area...but video was good
Maybe some carpet on the steps for added cushion for puppys feet
Now if I just had a step by step explanation instead of acoustic music that would be great. I’m quite handy with basic instruction but the drawing out on the table lost me.
Nice stairs but some words and a little teaching would have been helpful.
Except that you don't specify any actual lengths or pitch.
Really enjoy it. Let's check woodprix plans also.
I bought Woodprix once and now I have lifetime access to thousands of woodworking projects.
No measurements
Woodprix has a lot of plans to choose from.
Nice piece but poor video, Perhaps plans, measurements or throw us a bone at least.
I did it with the woodglut plans.
You went so fast, it was totally diffiicult to follow.
_thats what SHE said!_
This isn't a helpful diy video, its of no help at all. Its more of a "hey look what I can do" video.
almost as if he ... did it himself?
dogboy:your comment is “on point”...
_good boy_
No talk thru..ok and 10k of equipment. No help.
I mean I’m looking for instructions detailed! Not a high speed video of you doing it without explaining. ????why would anyone want to watch this? Just to pass time?
Dump the music and talk
not everyone has a $100,000 table saw to work with what a joke
Lol
i could get that miter saw for around 400$... not sure where you shop.
@@roynichols363 hahaha
Half glass empty much, Tony. If your gonna bitch because your poor, that is a lousy excuse, you probably got a whole backyard there, use that! If not, then clean your shit up from inside the house/apartment. It's not that hard.
Don't shy away from doing a little hard labour either, just use a saw if you have one, if not, then stop being a troll.
No one likes bitchy people, if you have a better way of doing something, then do that. You don't need to be exaggerating about how unfair everything is. Be creative about it. You didn't even consider any other suggestions before typing that comment, so you are the joke. 🙁
@@ellisabell7944
The joke is the entire video. It did NOT show anything instructional. Just fast movements without give an inkling as to WTH he was doing.
No help at all
Tf the point of doing a video tutorial and not say nothing but have and hillbilly banjo playing the whole time??
Denver Made:you know..you can always lower the volume right?
Not helpful at all not explaining what you are doing, what dimensions you are cutting stuff to.
Why? You made numerous cuts you didn't need to make because you chose to use your plank in a different orientation. Wasteful on materials and time consuming, when you could have achieved a better design, quicker.
waste of a video if you dont tell people measurements and explain as you go along!!