OUTSTANDING, very well-done conversion, by far the nicest I've come across on UA-cam thus far. Thank you for sharing... I have a Remington 11 (Auto 5) that was built in 1917 according to the serial number and Remington's website. However, the bolt-release button must be depressed to load the magazine which makes it a poor candidate for conversion as a home-defense weapon.
You are correct. The early ones did not have the “speed load” feature, but you could still drop through the port and hit the button. Now one could replace the old style one piece cartridge guide with the later 2 piece version if you really wanted the “speed load” feature.
Hey there, I am going through a very similar project with this remington model 11 i got for a great deal. Since the remington models are compatible with 870 tube extensions I used that. The only difference is that 870's have shorter threads so I am using a pvc spacer thats about a 1/4 inch. Its kind of a pain to disassemble but That's just how it is. I already chopped the barrel to about 19 inches (this also makes it a bit harder to disassemble) and added in a browning 2 piece loading gate for the speed load and not needing to press the button to load. Whats next is to have a replacement sight installed and to see if i cant get a larger bolt handle welded on there. Also need to replace the wood and get a butt pad. I remember you said you wanted to add a picatinny rail for a light, but maybe have an alternative you might like better. Search up Warsaw wood M lok sections. They are made for the AK wood handguard but i dont see why you couldn't do the same for the auto 8. Then you can remove it and still keep a relatively low profile if you want. Plus the mount options are endless. The only problem is that you would have a hard time dealing with any barrel shadow if you dont push the light out far enough. But with your extended tube, if you could find a place to make a handguard long enough it will take out that pvc pipe and be a real unique look. Thanks for the videos I am looking to incorporate some of these into my project as well and will defiantly look into black ice coatings, I wasn't sure if i wanted to do the bolt but yours looks so good i just might
OUTSTANDING, very well-done conversion, by far the nicest I've come across on UA-cam thus far. Thank you for sharing... I have a Remington 11 (Auto 5) that was built in 1917 according to the serial number and Remington's website. However, the bolt-release button must be depressed to load the magazine which makes it a poor candidate for conversion as a home-defense weapon.
Nothing chugs and kicks shells out quite like the Auto-5s
Good job!
The speed load feature was introduced in 1958 on at least the Belgian made Auto 5's. I'm not sure about the US made Auto 5's at that time.
You are correct.
The early ones did not have the “speed load” feature, but you could still drop through the port and hit the button.
Now one could replace the old style one piece cartridge guide with the later 2 piece version if you really wanted the “speed load” feature.
Speed load feature intro'd in 1958 on the Belgium made Auto 5's.
Hey there, I am going through a very similar project with this remington model 11 i got for a great deal.
Since the remington models are compatible with 870 tube extensions I used that. The only difference is that 870's have shorter threads so I am using a pvc spacer thats about a 1/4 inch. Its kind of a pain to disassemble but That's just how it is. I already chopped the barrel to about 19 inches (this also makes it a bit harder to disassemble) and added in a browning 2 piece loading gate for the speed load and not needing to press the button to load. Whats next is to have a replacement sight installed and to see if i cant get a larger bolt handle welded on there. Also need to replace the wood and get a butt pad.
I remember you said you wanted to add a picatinny rail for a light, but maybe have an alternative you might like better. Search up Warsaw wood M lok sections. They are made for the AK wood handguard but i dont see why you couldn't do the same for the auto 8. Then you can remove it and still keep a relatively low profile if you want. Plus the mount options are endless. The only problem is that you would have a hard time dealing with any barrel shadow if you dont push the light out far enough. But with your extended tube, if you could find a place to make a handguard long enough it will take out that pvc pipe and be a real unique look.
Thanks for the videos I am looking to incorporate some of these into my project as well and will defiantly look into black ice coatings, I wasn't sure if i wanted to do the bolt but yours looks so good i just might
Thanks ! Will check Warsaw out.
How did you attach the sling swivels? I appreciate you making this video. Thanks.
This video: ua-cam.com/video/LWLowfGLZdw/v-deo.html shows the sling studs at the 5 minute mark.
Nice what spring did you use
Nice gun, but I think it lacks a compensator ;-)
Ian put sling at the pistol grip
I have a beater Remington sportsmen that needs reworked
Awsum mustache joke…. That takes alot you didn’t even laugh
Thumbs up.