DIY LED Board and Batten Accent Wall | Wainscoting How to
Вставка
- Опубліковано 29 бер 2022
- 🛒AMAZON’s BEST DEALS (updated daily): bit.ly/3VWZKVS
🚨AliExpress’s BEST DEALS (updated daily): bit.ly/3VwoaDW
☑️Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher
Spotless Diffuser Channel 1m Amazon: amzn.to/47aIujz
Spotless Diffuser Channel 2m Amazon: amzn.to/3QoHeDb
Spotless Diffuser Channel 1m or 2m Muzata LED Store: bit.ly/3NHG5Uw
Spotless Corner Diffuser Channel 1m Amazon: amzn.to/3DFhRpf
Spotless Corner Diffuser Channel 2m Amazon: amzn.to/3Krqw2q
Spotless Corner Diffuser Channel 1m or 2m Company Site: bit.ly/3D3yI4R
LED Lights: amzn.to/3qPFA01
BTF Led Lights AliExpress: s.click.aliexpress.com/e/_Dm2...
ESP32 Module: amzn.to/387joI5
Power Unit: amzn.to/3IS3q16
Power Cord: amzn.to/3iPRbaN
Resistor: amzn.to/3tSPMqz
Wago Connectors: amzn.to/3uZhlOj
Cordless Brad Nailer Kit: amzn.to/3NuKxoC
Cordless Oscillating Saw: amzn.to/3DmuCnA
Silicone Wires: amzn.to/3KtISgE
Wire Strippers: amzn.to/36NM5Jj
Solder: amzn.to/3tGbixf
Soldering Station: amzn.to/3IWQo3t
Helping Hands: amzn.to/3hRMaOt
Soldering Fan: amzn.to/3uxgW54
Heat Shrink Tubing: amzn.to/3wL5JAR
The best way to help support my channel is to like, comment, and share my videos with anyone you think would enjoy them. Also please consider subscribing if you like the content! The other way is to use the Amazon links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!
#DIY #DIYLED #DIYPROJECTS
🚨 UPDATED DAILY! BEST DEALS on AMAZON: bit.ly/48FGnUv
☑Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher
Spotless Diffuser Channel 1m Amazon: amzn.to/47aIujz
Spotless Diffuser Channel 2m Amazon: amzn.to/3QoHeDb
Spotless Diffuser Channel 1m or 2m Company Site bit.ly/3NHG5Uw
Spotless Corner Diffuser Channel 1m Amazon: amzn.to/3DFhRpf
Spotless Corner Diffuser Channel 2m Amazon: amzn.to/3Krqw2q
Spotless Corner Diffuser Channel 1m or 2m Company Site: bit.ly/3D3yI4R
LED Lights: amzn.to/3qPFA01
BTF Led Lights AliExpress: s.click.aliexpress.com/e/_Dm2FaeJ
ESP32 Module: amzn.to/387joI5
Power Unit: amzn.to/3IS3q16
Power Cord: amzn.to/3iPRbaN
Resistor: amzn.to/3tSPMqz
Wago Connectors: amzn.to/3uZhlOj
Cordless Brad Nailer Kit: amzn.to/3NuKxoC
Cordless Oscillating Saw: amzn.to/3DmuCnA
Silicone Wires: amzn.to/3KtISgE
Wire Strippers: amzn.to/36NM5Jj
Solder: amzn.to/3tGbixf
Soldering Station: amzn.to/3IWQo3t
Helping Hands: amzn.to/3hRMaOt
Soldering Fan: amzn.to/3uxgW54
Heat Shrink Tubing: amzn.to/3wL5JAR
The best way to help support my channel is to like, comment, and share my videos with anyone you think would enjoy them. Also please consider subscribing if you like the content! The other way is to use the Amazon links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!
"LEDs were going to be unnecessarily added..." 😆 Excellent 👍
Lol its a fun way to live life trying to add light to everything hahaha
"LED's were going to be unnecessarily added" This man gets it 👍🏽😎
was the start of a process that got alimony unnecessarily added to my expenses, haha
That's the first thing that's stuck in my head. LoL
7500k in my tree this year.
Not sure if my ex still looks at me madly, or she's squinting
I am an eletric engineering student and I've been working with RGB LEDs embedded systems for a few months now. I just came across you channel while looking up for some project ideas and I gotta say, you attention to detail and whimsy are great aswell as the looks of every project. Keep up the awesome work man! Also thanks for sharing your knowledge through such well made videos.
Much love from Brazil ✌
Thank you so much for watching and taking the time to comment! Love the support and Brazil is certainly a place I would love to visit someday! Hope you have a blessed day!
It’s the resistor in series is what got me lol
wonderful project! 👏😎
Thanks so much!!
Your wife is beautiful @@ChrisMaherDIY both make a lovely couple 🙂
I watched a few of his videos now these are by far the most helpful videos I have ever watched on how to reuse my RGB that I've used for other people projects that don't have the logic board and power supply now I can safely assure myself that I can reuse those RGBIC lights now! Thank you so much! -Brent
Thanks so much buddy! Appreciate the kind words and thanks for taking the time to comment! Glad you are enjoying the content!
Chris, LOVE the videos, man. You spare no details for education AND create relaxing and entertaining videos. Bravo. Keep them coming!
Thanks so much buddy!! Appreciate the support and thanks for taking the time to comment! Glad you are liking the videos!
This is my favorite of your videos so far. The concept is exactly the kind of thing I think about doing. I think you are getting better at filming and editing as well. Great Job. I can't wait to see more projects!
Thanks so much!! Appreciate the support my friend! Glad I could help with the idea and for sure many different directions and designs you could take this project!
King of Addressable Led work. One of the best on UA-cam. Impeccable 🎉
You projects never disappoint, how you included the LED lights into your wifes idea, kudos lol, hope it passed her longterm approval. As some else pointed out too, you can use multiple strips on the same ESP32 and last time I read, some people run up to four, all on seperate data pins BUT there maybe a limitation of pixels to about 200 or so on each. Even having two strips on one board will save you a few pounds/dollars which all count, well especially for me lol.
Thanks buddy! Lol she actually doesn't mind them so they get to stay! Thanks for the heads up on the fact the esp32 can control multiple strips with different pins. That would for sure be the more cost effective way of doing it! I'll have to look into that to figure out the logistics. Appreciate the info!!
Been kind of bingewacthing your channel and come across a bunch of ideas ive had and never thought to follow through with and seeing them done in real life (better then i had come up with) is amazing the attention to detail in your projects and the video itself is truly high quality
I just found your channel, and you’ve done so many of the projects I want to do! I want to do this without the vertical pieces in my garage.
Great minds think alike :) That sounds like a very fun project and probably not super difficult! Let me know if you have any questions!!
That looks fantastic! Now I have another project idea and still not enough time to do them all haha.
One addition I'd have made is to remove the window trim and cut a channel in the back to run the wires through for a cleaner look.
Thanks so much as always! That is a great idea. I did think about that but I pictured myself somehow breaking the trim while removing it and then having to replace everything. I went with the safer yet not as professional looking rout lol.
That looks fantastic brother. My wife wants a little more modern angled design using the board and batten style, and I am TOTALLY incorporating some of that channel into the design....
Thanks as always buddy! Yeah I really like the angled design look. You could for sure do something very similar with that and the leds! Might be a little more tricky to run/hide the wires but totally doable!
This dude is a absolute bad ass. Thank you for taking the time to make this video. So going to do this.
Thanks so much buddy! Appreciate the love. Glad you liked the video and thanks so much for watching!
This build is epic.
Bruh. That’s insane.. just got to the actual showcase of the finished results, and my mind is blown. Damn, I wish I had the money to do this type of stuff. I love designing, building, and creating areas though I’m only 19 hopefully one day I can turn that into a reality:)
Thanks so much for watching and the kind words buddy! I'm glad you liked the video! My advice would be to just start out with some small type projects and then go from there! Save up money if you can. Its a fun little hobby and sounds like you have a similar mind as mine where we like to create / build things!!
Great one again, Chris,
Nice integration with the wood.
Thanks buddy! Appreciate it and thanks as always for watching!
I also love the SK6812, great colors. I will definitely steal some gradient ideas from the end of the vid for my own WLED lamps 😄
I really do like them as well! Definitely a step above the ws2812b with the separate white channel! Thanks so much for watching!
Very nice result! Do try to add forked cable shoes to the end of the wires that go to the power unit! This way they are more secure in place and you can join two wires together for 1 good connection!
Thanks so much for watching and appreciate the advice! I'll have to look into those. Is there a certain type you recommend on amazon?!
awesome video and awesome idea. i love seeing the cool stuff you come up with, finding interesting and unique ways to integrate lights into dull spaces
Thanks so much! Its certainly fun trying to light up spaces and its fun seeing it all come together! Thanks for watching buddy!
This is amazing!! I'm impressed, I would honestly like to attempt this myself 😅
Thanks so much for watching and taking the time to comment! Glad you liked the video!
I love the thought process. Especially the 2nd choice - Justifying "New" tools! Let's go!
Love the look. One small tip, if you want to make the seams between the aluminium profile seamless, use the smaller end piece of the diffuser at the start, that way the diffuser 'links' the aluminum strips together preventing separation.
Thanks so much for watching and taking the time to comment! Thats a great suggestion! I'll have to do that for sure the next time I use these channels! Thanks buddy!
She is brave and talented to paint without covering on the floor! LOL I would have a white carpet after that.
Lol she is! Thanks so much for watching!
I know very little about LED’s but have a custom Millwork shop, we could have made a good team.
This looks so extremely incredible and adds a high end element to the project.
Great job thank you for sharing.
Inspiring stuff, thanks for posting!
Thank you so much for watching! Appreciate the support my friend!
Great work, now I’m getting this done for my bedroom! 😉✅
Niice!! Let me know how it turns out! Good luck buddy!
So I Googled some pictures and it seemed easy enough. Lol. Famous last words for any construction project. But you did a great job. Thanks for the inspiration.
hahahaha that was exactly me when I tried replacing the water temperature handle in one of our showers. Didn't take too long before regretting ever starting the project! Thanks so much for watching and taking the time to comment!
Great job. Would love to do something similar for my home office and sons room.
Thanks so much! Definitely give it a try! Its pretty simple but let me know if you have any questions at all!
I'm so stoked I stumbled upon your channel! Thank you for your content and tutorials!
Thanks so much for watching and i'm glad you like some of the videos! Appreciate you taking the time to comment!
Turned out great fair play. Good job
Thanks so much for watching and taking the time to comment! Appreciate the support!
Looks amazing. Appreciate your detailed explanation and footage 👍💝
Thanks so much for watching and taking the time to comment! Glad you like the video!!
Turned out fantastic! I've been wanting to do something like this for awhile. I was wondering how you were gonna clean up the power supply and control boards to hide them, then I remembered... use plants! Awesome job!
Thanks so much! lol yeah I just used a plan for now but once all our new bedroom furniture arrives I may build a little wooden decorative box to keep everything in or the other Idea was to have a fake plant in the corner and most of those bases are hallow. I would then stick the power and controllers in the base of the plant unit (probably have to drill a few holes) and hide everything that way!
Love this design!
Thanks for watching and appreciate the support!
Yo Chris,
I really enjoy your stuff. Your creativity is excellent. A trick for you, try pushing your caulk line instead of pulling. After you practice you have more bead control, often not needing the "finger finish" method
Simply put..... This is BADASS!
Thanks so much buddy! Appreciate the support and thanks for taking the time to comment!
you got a new subscriber, i love what you do, nothing better than DIY
Looks great Chris!. Hopefully your wife is happy now and they won't be coming down haha! Keep up the great videos, love them and have started my own projects as a result, thanks a lot. :)
Thanks so much buddy!! She doesn't mind them so they will be staying! So glad you are enjoying the videos and that's awesome you are doing your own projects. Its a fun little hobby for sure!
The lights looks lit!
Thanks so much buddy! Appreciate it!
Hey Chris… awesome video. I love what you make with LED’s. I’m standing at the edge of the pool sticking my toe it to see how the water feels before I just jump right in with WLED’s.
Thanks buddy!! Lol come on in, the water is great! I dont have really much to compare it too but for someone that does not know or really have a desire to do programming, I cant picture anything better than WLED!
@@ChrisMaherDIY oh I’m gonna jump. I’m waiting for your new video with the true white LEDs you told me about
Very nice work! You just gave me some great ideas. Also, try to convince your wife that you need a small hand router. Then you can just route out a channel in the wood, and run the wires in that and won't need any additional cover pieces.
Thanks so much and I'm glad you were able to get the gears turning! That's a really good idea to use a router! I actually have one but never thought of using it. Thanks for the suggestion!
WOW! It looks amazing.
Thanks so much for watching and taking the time to comment. Glad you like it!
I love your videos bro ! Complete game changer 🙌🏼
Thanks so much buddy! Glad you like the videos! Thanks for watching!
That's looks super clean 🤩
Thanks so much for watching and taking the time to comment! Glad you liked the project buddy!
you're an artist dude and your work is amazing
Thanks so much for watching and the kind words! Appreciate it buddy!
Your music selection is impeccable.
Thanks so much buddy! I realize everyone is not going to have the same taste in music but I'm glad there are a few out there who appreciate the style that I like!!
You could also add a bit of trim around the lower section of window frame as well so the width is consistent.
That's a great idea! Wouldn't be that hard to do either! Thanks for watching and for the great suggestion!
you got my attention with the first 30s. im going to add LED light weather my wifre likes or not lol the project looks great.
Lol thanks buddy! Glad you liked the video!!
That looks good 👏🏽👏🏽👏🏽 worth it
Thanks so much!! Thanks for watching!
Great project! My preference would be not to see the light source, but it's an amazing idea.
Thanks so much for watching and taking the time to comment! Yeah its for sure a personal preference! Hope you had a great Christmas!
You could also consider bringing the power up from the baseboard to fill in the longer section of the top rail. Then you could avoid trimming around the window.
Thanks so much for watching and the great idea!! I never thought about that. I was fixated on keeping the wires on 1 side that I never thought about different ways I could have done things. Thanks for taking the time to comment!
I love the whole thing but the sheer visual offset kills me 😂. Great video and work.
Thanks so much for watching and taking the time to comment! Glad you liked the video! Lol yeah, its not perfect but a fun project regardless! Thanks again!
gd man. you keep batting a 1000. Amazing job.
Thanks so much!! Appreciate the support buddy! Thanks for watching as always!
This was awesome. Great project and video 👏
Thank you so much for watching and taking the time to comment! I appreciate the support! Glad you enjoyed the video!
Wow. it turned out a lot more beautiful than I had expected. Any idea on the maximum length/amount of LED that a single strip and go before it gets wonky?
Thanks so much! Glad you liked the project! I've never ran more than a couple strings so i'm not sure the max distance. I'm always a trial and error type of guy so I would probably just experiment with first three 5meter strips and go with more or less depending on the results. Its also going to completely depend on what your using for power and how much/often you do power injection.
asmr for diy engineers ❤❤
Thanks so much for watching!!
Nice job!
Thanks so much!!
Fantastic job !
Thanks so much for watching and taking the time to comment. I appreciate the support buddy!
you're a vikings fan!? I love this channel even more now
I bleed purple! Its been a tough life being a Vikings fan so I'm glad there are others out there who know the pain lol. Thanks buddy! You from MN?!
As always it looks fantastic😀
Thanks buddy!
Thanks for the advice
Thank you so much for watching and taking the time to comment! I appreciate the support!
Ok, I was loving this video and then boom... the Thielen jersey. We're definitely kindred spirits my friend! Skol!
lol that's awesome! I'm a Vikings fan for life and its a very tough life to live knowing that we will neve win a super bowl but it is what it is lol! Thanks so much for watching!
Wow the looks amazing. Great job
Thanks so much for watching and taking the time to comment! Glad you liked the video!
Hah! Really cool as well, projects are getting bigger and bigger 😂😃
Thanks as always Chris! Yeah I was just thinking that this was probably my biggest project to date!
excellent this your doing great ideas for us thumbs up
Beautiful!❤
Thanks so much for watching! Glad you enjoyed it!
Great project! In the future you should try out the multi output support in WLED. You can control both of those strips (both individually or as one single string) from a single ESP8266 using two data output pins.
Thanks so much and thanks for the tip! I heard you could do something like that but I've never done it so I'm not entirely sure how it would be done. Is it pretty easy to do/set up? Do you know what pin you could use can it literally be almost anyone for the data output pins?
@@ChrisMaherDIY on an 8266 recommended pins are GPIO 1,2,3 , for esp32 recommended is GPIO 1,2,3,4,16 so really it’s as simple as soldering to those pins then jumping into the web interface and defining the pins. Then everything can be controlled from the one board.
@@benellis2377 Thanks so much for the info! That helps a ton. I'll have to try that for sure on future projects!
@@ChrisMaherDIY about wled, its extremely simple to use, just need to flash the Bin file on a esp8266/32. get a board like the node mcu it has pre soldered pins also they tell you to use a level shifter of the led strip but honestly if you initial wire is shorter than 30cm.you should be fine, rest like pin definition you can do that on the web ui, they even have excellent documentation, what makes it cool is thag you can sync multiple of those together
@@ShahZahid Thanks so much for the information! That's all very helpful to know! I definitely have a lot to learn about the esp boards as well as all the features of WLED!
Nice 👍🏼. One thing you could’ve done is to have identical strips for the lower part and the top one and hide the LEDs that run across the window in the window from so you can’t see their light and and then run an extra wires to the last part. This will give you seamless and identical effects on both strips. Either way it looks good.
Thanks so much! Yeah I was trying to wrap my head around how I could keep the animations identical if I wanted too but I never figured out a way in my mind so I didn't try attempting anything! A couple other people had some suggestions as well. That's what I love about the led community! Everyone is so nice and offers ideas and suggestions on how to improve!
Thats to sick💯
For the dap and caulking products, push the product with the tip instead of pulling and it'll come out perfectly smooth on its own.
Thanks so much for watching and for the advice! I'm certainly no expert so I appreciate any tips from people that know a lot more than I do!
Absolutely FKN love it! My home improvement ideas just got put on steroids! THANK YOU!...just SUBSCRIBED and I'm about to go ham on your videos bro!
Thanks so much buddy!! Glad you liked the project and thanks for the support my friend!!
the twinkling white and blue in the daytime looks really cool! not subtle, but also not far off from "normal." kinda like an aquarium vibe. great work!!
Thanks so much!! Appreciate the support and glad you like the results! Thanks so much for taking the time to comment.
@@ChrisMaherDIY you are inspiring all of us to get into soldering and elevating the diy rgb game to new heights.
Now my board and batten wall looks like trash. I can’t unsee this!
Lol thank so much! Glad you like it and thanks so much for taking the time to comment!
Another excellent project, you had me giggling with the line of "unnecessarily adding LEDs," that is me through and through! 🤣 🤣 🤣 🤣
Great to see the sk6812's.
Lol yeah we definitely think alike! Why even bother making something if you can put lights on it?! lol. I really am loving the sk6812's! A little more expensive but I do love having the separate white led!
@@ChrisMaherDIY I knew you would, like you said a little more cost but so much more ideas, especially for main lighting, my lounge has all black furniture and curtains and magnolia walls and ceilings and I get all my colour from LEDs whether they be strips and chipsets or whether I borrow from my professional lighting stuff, that way it's nice and bright and white when you need to do stuff but every colour of the rainbow and more when it's chill out time.
Quick question, do you have a patreon account?
@@-djs I do not. Maybe sometime down the road I'll look into it!
@@ChrisMaherDIY
I'll keep my eyes open, until then keep up the great work,
Nice work. Very clean looking 👌
Thanks buddy!! Appreciate the support!
Really clean job. Would love to see how you hid the controller and the massive power supply 😂
Thanks again buddy! I mostly just hid things behind furnature or plants but if thats not possible I did make a video of a way you could hide it so it does not stick out horribly. ua-cam.com/video/ibRp6eeUwBA/v-deo.html I'm not wanting to hide things in my wall or behind sheetrock, (too much work) so options are kind of limited!
Chris, you're amazing. I've been watching all your videos for the last few days and have started ordering supplies for my own LED projects. I'd like to have a dedicated, preferably wireless, on/off switch for them and was wondering if you have any suggestions on how to accomplish this.
I made it 3 minutes in and you’ve managed to creep me out that you might be the exact same person as me… All the way down to the same LED diffuser that I’m in love with on Amazon! 😂
Hahahaha i'm glad there are others out there like me lol. Thanks for watching buddy and thanks for taking the time to comment! They really are the best diffusers out there!!
Your content is great keep it up you are a genius
Thanks so much my friend! Appreciate the support!
This is SICK🔥
Thanks so much!
super cool project
Thanks so much!! Glad you enjoyed the video!
Damn this looks sick with the leds I wish room was bigger so I could do projects like this but sense it's small you wouldn't be able to see it
Thanks so much for watching and taking the time to comment! You could still maybe use the design idea for something else? The diffuser channels I use in the video can be used for so many different things!
@@ChrisMaherDIY thanks for the idea I could probably do the design or lights in the hallway
this is middle class excellence !!!1
Lol that's awesome!
I really like this I'm kind of like you. I think about how I can add lights to everything lol
Hahaha! Its a fun hobby that not everyone appreciates lol.
Please use some ferrules or cable lugs when working with screw type connectors.
Over time these will have a better connection because they will keep the strands in place instead of pushing them outwards and loosening the screw pressure.
On all spring loaded terminals you should NOT use ferrules as they will keep the optimal pressure and have a better connection without one.
Please point this out in your Videos because many take this as a guide and they should know how to do it safely.
Other than that this build looks awesome. I think I will have a few projects in the future although I will use a 12V variant due to less voltage drop over bigger distances.
Thanks so much for watching and taking the time to comment. Thanks for the tips! I'm always looking for ways to improve from people who know a lot more than I do so i'll have to look into the ferrules / cable lugs!
I really like your lighting controller. I need to find a LED smart box like that
Thanks so much for watching and taking the time to comment! Glad you liked the video!
Sick bro!
Thanks buddy!! Always appreciate the support!
pro tip:::::: paint your trim BEFORE installing to the walls
Great video as always, but as good as the project was, that intro was the best part. LEDs unnecessarily added lol.
Thanks buddy!! lol she was not very excited but she doesn't mind how it looks after its all done so I think it will stay!
Holy electrical engineering!
Thanks so much for watching!
Awesome job 👏 👍
Thanks so much!!
Great video once again. Could you do a video on your favorite wled animations and color patterns?
Thanks so much! I think that is probably going to be my next video. Hopefully i'll have it done in the next couple weeks! Thanks buddy!!
Im hoping to visit your house on day just to see your lights.!!
Love the finish, and definitely like the after shots, most videos give 20 secs or so on the end product. Really irritating. Also like how you added the need to expand your tool collection and auto add LED's. :). Thank you
Thanks so much for watching and taking the time to comment! Lol yeah I usually go overboard on the pictures and videos but glad you like that! Always have to find a way to get more tools :) I now understand how people in their 60's and 70's open up their garage and it looks like they run a mechanic shop or woodworking business out of it lol.
Absolutely doing this asap. Thnaks for the links to everything too! Nice touch...
But my question is, what software runs all the color patterna and movements?
Your videos are awesome. I would love to make baseboard trim like urs but have them motion detected. Not sure how to go about that as well as power them permanently so there's no plug into the wall.
I love you your videos my friend
Thanks buddy and thanks so much for watching!
Very clean install! Looks great! Do you have any vids that show where/how you mount your PSU and controller? Assuming they are getting put into some type of enclosure like a CableGuard or something similar and then hidden away somewhere?
Why using 2 separate esp32s?
Looks amazing!!
That looks fantastic! Great job!! Three questions: 1- where did you put/hide the power unit? 2- what does the room look like with the bed and furniture back in the room? And 3- What was your wife’s reaction?
thanks so much!! Glad you liked it! For right now i'm just hiding everything behind a plant and using a basic cable hider for the power cord from the outlet to the box. I might try to build a small box to attach to the side of the wall to house everything and paint the box the same color as the wall to blend in. So we sold/gave away our furniture assuming we could just go out and buy new stuff. Little did we know everything is backordered like 3 months! So once our new bedroom stuff arrives I'll probably do a quick follow up video showing how it all looks with everything set up and decorated! My wife doesn't hate it lol. She doesn't love it like I do but I don't think I will have to take it down and start over! It actually looks super clean at night if you just have the bottom section on a soft warm white. It casts a nice glow and its not distracting at all.
@@ChrisMaherDIY Just plan a romantic night for her, cook her dinner/order dinner, have some wine and her favorite movie, then sync up some music to the LEDs for a "nightcap." She'll fall in love with them, and likely you all over again.
@@WotanSkyFather hahahahah I think you may be on to something!!